|
|
With our explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors with degrees of protection IP 54 to IP 65, and EEx e and EEx de. All motors are also available as special versions - designed to suit your individual requirements.
We also offer you more than just innovative design and engineering.
In more than 80 countries around the globe, our international service network with authorized service centres offer you a complete range of services: These services include intensive consulatation and engineering design as well as on-site training.
Our quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, Moeller Antriebstechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). |
|
| ECOFIT external rotor motors are available with IP 20 or IP 44. IP 20 motors are self-ventilating and can give superior power to IP 44 motors with equivalent heat rise. The power on the shaft, voltage and frequency, shaft, connections and protection... can be defined according to your requirements and application. If specified, ECOFIT external rotor motors can be manufactured in multispeed. |
|
GE ASD Inverter Duty:
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty appliccations.
Features and Benefits:
- Standard Features
- Infinity:1 CT Speed Range CH to 90 Hz
- IGBT Compatible
- N/C thermostat
- Opp DE mounting face & stub shaft for tach mounting
- C-Face foot mount thru 30 HP
- Cast Iron Frame & Brackets
- Class F Insulation
- 440 Fr have insulated ODE brg/Grd brush |
|
Series: SEE315-355; Sh355-500s
Output: 160kW up to 1500kW
Speeds: 3000, 1500, 1000, 750, 600, 500 rpm
SEE series motors with insulated bearing chamber and whole Sh...s series is suitable for converter operation.
Protection degree IP55, insulation class F. Cast-iron frames with terminal boxes placed on top.
On clients request motors can be fitted with external ventilation system, impulse encoder for precise speed of rotation control, heaters and SPM's. |
|
SM motors Series consist of three-phase asynchronous electric motors with power range between 0,09 kW and 45,0 kW while the motor frame is from 56 up to 225.
The basic construction is closed, fan cooled and IP 55 enclosure rating.
SM series motor is able to properly run under overload conditions thanks to a high thermal reserve; the insulating materials are class F as standard (Class H on request). |
|
JO2 three phase electric motor
Technical spec:
Totally enclosed fan cooled (TEFC) three phase, squirrel cage type induction motors.
Beautiful modeling, compact structure, low noise, high efficiency, large starting torque, easy operation, etc
Ambient temperature: -15C
Altitude: not exceed 1000m
Rated voltage: 380V or any voltage between 220V-760V
Rated frequency: 50Hz, 60Hz
Protection class: IP54, IP55
Insulation class: F
Cooling method: IC0141
Duty: S1 (continuous)
Connection: Star-connection for up to 3kW, delta-connection for 4kW and above.
Application:
Widely used in various machines and equipments, such as drilling machines, blowers, pumps, compressors, transporters, agricultural and food processing machines.
MSN: hmm789 at hotmail.com |
|
FRAME SIZE:
80 to 280
OUTPUT:
1.1 to 90 kW
POLARITY:
single - 2, 4 poles
RATED FREQUENCY:
50 - 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55 or higher
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
aluminium design up to 160 frame size
cast iron design from 180 frame
high efficiency EFF1 motors, values to CEMEP Voluntary Agreement
high efficiency EPAct motors, verified by UL Underwriters Laboratories Inc. (Department of Energy n° CC046A)
OPTIONS:
cURus certification
CSA certification
from frame size 90 operate on static frequency converters
encoder
forced ventilation
mechanical and electrical design on specific demand |
|
Three-phase squirrel-cage high voltage motors in finned frame are characterized mainly by very high degree of energetic efficiency.
Thanks to compact and stiff frame construction motors have very low vibration degree and low noise level.
Sh series motors are of general industrial use. They are used for driving various machines and devices which work is of continuous duty without frequent starting and reversing.
Motors can work in fast-switching automatic standby power systems. They can be restarted at 100% residual voltage and at full opposition of phases. |
|
Output rating from 100 to 3150kW (135 to 4000HP)
Voltages from 220 to 6900V
Speed from 3600 to 600rpm
With simple and compact construction, H Line motors are widely used due to their high reliability making them suitable for the majority of the driven machines found in industries.
The frame construction consists of a high resistance solid block and it is fitted with external cooling fins. The whole cooling system, which consists of an internal and an external air flow, provides an homogeneous blow of cooling air inside the frame for maximum performance of such motors.
Main advantages in using WEG H Line motors include:
- High efficiency
- Degree of Protection IP(W)55 / IP(W)56 / IP(W)65 (TEFC, TEBV)
- Reduced noise level
- Low and easy maintenance
- Robust solid high strength cast iron construction
Can be built to meet IEEE841 (2001) mill and chemical duty Can be built to meet API541 standards
- Bearings
Oil lubricated sleeve bearings
Grease or oil lubricated ball or roller bearings
- Cooling
Self cooling
Forced cooling, usually required for VFD applications.
- Interchangeability with existing motors
- Internal air flow
- Heat exchanger not required. |
|
SMI series is made up of single and three-phase asynchronous electric motors with integrated frequency converter. Power range is between 0,37 kW and 7.5 kW (frame size from 71 up to 132). Unit is made up of a high-efficiency three-phase asynchronous electric motor and a compact frequency inverter placed at the non drive end. The SMI series motors are TEFC, IP 55 (available IP56), class F (class H available). SMI motors offer a wide range of overload capacity and a high thermal reserve. The frame consists of aluminium alloy. Shields and flanges are aluminium up to axis height 90 and cast iron from 100 up to 132 frame size . The inverter housing is isolated from the motor in order to avoid heat transmission (patented system); inverter dissipator is self-ventilated. The frequency converter electronics is very reliable as it has been developed in cooperation with the main inverter manufacturer companies; control can be V/F type (frequency voltage control) or SLV type (sensorless vector control). SMI motor can be easily programmed using only three buttons. On request, motor can be arranged for main Bus fields (Profibus, Interbus-S, Device, etc.):
SMI motors are projected as built-in inverter motors and not just as simple assembly of a standard motor with an inverter.
|
|
| Lincoln wants to make the job of selecting a motor for inverter-fed applications as easy as possible. That's why we introduced our line of CTAC Inverter Duty motors. We eliminated the hassle of matching motors to inverter drives since our motors work well with any brand drive. We eliminated cable length restrictions giving you the flexibility to optimize your application. And we've eliminated the need for costly power conditioning add-ons like filters and reactors. And our industry-leading five (5) year warranty will let you rest easy. |
|
Designed Right, Built Right
Comprehensive Product Line
7.5 HP through 75 HP, open drip-proof enclosures
1200 RPM and 900 RPM, high acceleration torque, low current draw, Elevator Duty designs
200, 230/460 and 575 Volt ratings. 60, 40 and 30 Hertz designs
More efficient, lower current, 30 and 40 Hertz designs can result in reduced drive size
Normally closed thermostats, one per phase
Tough Standards
Dynamic Balanced per NEMA to assure smooth, vibration free car operation
Ground tested at the winding stage, surge and ground tested before final assembly then given a commercial test per NEMA
Increased Motor Life
Our Enhanced Class F Insulation System handles the wave front voltages and dvdt levels that are major factors affecting elevator motor insulation life. Phase insulation, slot liners and wedges are high dielectric strength materials. A two component, 100% reactive, solventless polyester resin Class H varnish is used to impregnate the hoist motor stators. This varnish provides superior protection and strength as well as being in compliance with industrial environmental regulations. Lincoln's insulation system exceeds the requirements for inverter-fed motors per NEMA MG1, Part 31.
Superior Construction
Our rigid, low noise, low vibration construction features include rugged steel frame construction with cast iron end brackets and heavy cast steel, full length feet with gussets, welded to each side of the frame. Our hoist motors are provided with elevator shaft end play and oversized ball bearings with two pre-loading bearing washers to insure quiet bearing operation and centering of the rotor. A standard one inch diameter stub shaft for encoder mounting is machined as an integral part of the AISI 1045 hot rolled, medium carbon steel shaft (not a press in or bolt on piece that may require alignment). |
|
GE Motors has been manufacturing rotating electric machinery for over 100 years. Power ratings in this series range from approximately 1000 HP to 100,000 HP. Over 600 MW of variable-speed AC experience alone has resulted in GE Motors building a rich tradition of technical excellence, quality and reliability.
Industries: Oil&Gas, Power& Energy, Mining, Cement, Metal, Marine, Pulp & Paper, Water & Wastewater, Other Process Industries
Features and Benefits
- Adaptability: Each large synchronous machine is custom-designed to meet your specific application.
- Quality: GE Motors ISO 9001 certified. This ensures that high international standards of quality are met in every aspect of the business - from the initial marketing contact through to design, manufacturing,installation and servicing.
- Global Presence: GE Motors and GE Industrial Systems have locations to serve you throughout the world.
- Performance: Synchronous motors can be designed to operate with leading power factor. This feature helps balance out your plant's power system, thus lowering your energy costs. GE Synchronous motors offer you the benefits of high efficiency which reduce operating costs. An added benefit is low inrush current for minimum system disturbance during starting. GE Synchronous motors are designed to match the starting torque requirements of the driven equipment without sacrificing running performance.
Applications:
- Fans
- Pumps
- Compressors
- Metal rolling mills
- Grinding mills
- Mine hoists
- Pulp & paper refiners
- Small hydro generators
- Marine propulsion
- Gas & steam turbine generators |
|
All the Corners We Didn't Cut ... 5 Big Reasons Lincoln's Big Units Are Better
If you are looking for a large frame motor that can provide exceptionally long life, rugged durability and outstanding performance, remember, you can only get out of the motor what the manufacturer puts into it. |
|
Series: K... 63 bis 355
Output range: 0.12 kW bis 440 kW
Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request
Features: Approved by GL, BV, DNV, LRS, ABS, RS, energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS, various modifications possible |
|
Servo-ventilated three-phase motors - Series W...- Servo-ventilated motors with single-phase motor Papst
- Servo-ventilated motors with three-phase motor
|
|
| the assisted power cooling system of the Delphi SV series is three-phase 400/50 440/60, IP55, with separate terminal box |
|
Product Overview: VHECP2394T
Description: 15HP,3525RPM,3PH,60HZ,254HP,0934M,TEFC
Ship Weight: 285.000 lbs.
List Price: $ 2990.00
Multiplier Symbol: L1
- Corrosion resistant epoxy finish
- Cast iron construction
- Designed for vertical mounting
- Rotatable conduit box
- Stainless steel nameplates
- Shaft seals
- Energy efficient windings
- Two lifting lugs
For medium and high thrust in-line pump applications. Waste water treatment plants, petro chemical industries, pulp and paper mills and agricultural irrigation applications.
|
|
Lincoln introduces a line of Signature Series single phase AC motors. They are available in a number of configurations including ODP, TEFC, Explosion-proof, Washdown, Farm Duty/Agricultural and Brake motors.
Signature Series premium construction features:
Durable rolled steel frame
Class B insulation
High-quality ball bearings
Easy-to-read nameplate
Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation.
UL Recognized Component Listing and CSA approval.
Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.
Made in the U.S.A. |
|
Single-phase motors of the BS series are manufactured to the applicable IEC standards and are of the enclosed type, externally ventilated and with run capacitor permanently connected.
Motors are available in the B5 and B14 flange mountings, in the 4-pole execution. For applications requiring high starting torque the version with both the run and the starting capacitor can be specified.
|
|
Single-phase motors with capacitor - Series Z...
for normal purpose- Motors with always-on capacitor
- Motors with three wires (balanced windings), with always-on capacitor
Single-phase motors with capacitor - Series ZS..
for high starting torque - Motors with electronic starter for starts with at least 2 minutes' intervals
- Motors with electronic starter for starts with around 6 seconds' intervals
Single-phase motors with capacitor - Series ZI..
for high starting torque - Motors with rotary switch
- Motors with rotary inverter
|
|
- Ambient temperature: -15°C
- Altitude: not exceed 1000m
- Rated voltage: 110 V, 115 V, 120 V, 220 V, 230 V, 240 V
- Rated frequency: 50Hz-60Hz
- Protection class: IP44-IP54
- Insulation class: B-F
- Cooling method : IC0141
- Duty: S1 (continuous)
- Shaft: Close keyway Bearing: SKF,NSK or NTN |
|
|
|
Asynchronous electric motors
