|
|
| Products 121 to 150 of 240 |
APPLICATIONS:
Air compressors, pumps, conveyors, blowers and general industrial equipment.
FEATURES:
Double Shielded Ball Bearings
Rigid Base Standard
Resilient Mount (Note 35)
Class B Insulation, Continuous Duty, 40C Ambient
F1 Assembly
Reversible Rotation
Protection:
Note 23 = Manual Reset Thermal Overload Protection
Note 24 = Automatic Reset Thermal Overload Protector
Note 25 = No Thermal Overload Protector
|
|
|
|
|
|
400 through 4000 Horsepower
50 and 60 Hertz
Low and medium voltage
5000 through 9600 frame
Open Dripproof, Weather Protected Types I and II
Direct connected applications
Product Overview
Recognized by engineers and industrial users for their long life, sleeve bearings are offered as an available option on all TITANÒ horizontal ODP, WP-I and WP-II enclosures. Sleeve bearings operate on a
thin film of oil supplied by oil ring or flood lubrication and are frequently applied to high(er) speed direct connected loads. Sleeve bearings have a very limited capacity for any external radial loads, but when applied and maintained correctly, they offer an infinite (theoretical) life.
U.S. Motors offers a unique sleeve bearing product when evaluated against the typical competitive design. The USEM two piece, spherically seated bearing has become an industry benchmark which provides significant advantages over the fixed seated bearing.
A USEM spherically seated bearing (left) illustrating the tin babbitted thrust face(s). The fixed seated design is from a competitive product of the same rating.
|
|
Slip ring motors S..R 132 to 315, duty S1, continuous operation S..H 132 to 315, duty S3, intermittent duty
Output range 2.2 kW to 315 kW
Speeds 3,000; 1,500; 1,000; 750; 600; 500; 375 rpm
Features Designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42679 (S..R) and DIN 42681 (S..H), robust, low-vibration grey-cast iron design, degree of protection IP 54 / IP 55, higher degrees available on request, class F insulation, class H available as an option, energy-efficient and environment-friendly, various modifications possible
|
|
YH Series (IP44) High Slip Three-Phase Induction Motors
YH series (IP44) motors are derived from the Y series (IP44). Not only having the advantages of Y series motors but also designed with high slip performance, the motors have high stall torque, small stall current and shock-resistance in loading.
|
|
As a result of their modular design, the 1R.5 slipring rotor motors (US: wound-rotor motors) can be produced with various cooling systems. This means that the motors can be flexibly adapted to the customers's application.
The enclosed slipring compartment – located inside the NDE bearings – guarantees a high degree of protection for the complete motor, i.e. for the motor and slipring compartment.
Brief overview
Motor type: Slipring rotor
Water-cooled motors: 1RU5 type series
Air-cooled motors: 1RR5 type series
Shaft heights: 400, 450, 500, 560, 630, 710, 800, 900 mm
Power range: 0.3 to 8 MW
Rated voltages: 3.3 - 11 kV
Degree of protection: IP55
Cooling type: IC 611, IC 81 W, IC 01
Type of construction: IM B3 (IM 1001)
Bearings: Roller bearings (up to SH 710), sleeve bearings (from SH 800)
Regulations/Standards: IEC, EN
|
|
As a specialist for customer-designed solutions we are able to achieve optimised customer-specific solutions at an extremely competitive price for turbo, spiral lobe-type, piston and rotary-piston compressors. They can be used for induction engines with squirrel-cage rotors or slip-ring rotors within a voltage range between 380 V and 13.8 kV (20 kV) with up to 25 MW output and all standard cooling types.
The extraordinary strength of our products lies in their reliability, efficiency and optimal start-up performance. In addition to their longevity and high availability, our extremely low-maintenance products offer the customer the benefits of energy-saving operation and easy start-up time.
|
|
Single-phase capacitor motors Series KD.1 and three-phase motors Series DR.1
The motors are solidly designed and are maintenancefree for life.The multi-grooved stator contains a threefold winding which, together with the phase-shifting capacitor, creates a symmetrical rotating field at the rated working point of the motor.The rotor is of the squirrel-cage type. Two- or four-pole motors with a variety of design Iengths and diameters provide rated torques from 0.75 to 12.6 Ncm. Can be combined with reduction gear units, brakes, and tachogenerator systems.
|
|
Single-stage AC Motor, Used in Hand Dryer
Model Number:ND-B
Key Specifications/Special Features:
* Application: vacuum cleaners, hand dryer
* Stage: single
* Voltage: 100 to 240V (50 to 60Hz)
* Input power: 200W to 1,800W
* Insulation class: A, E, B and F
* Maximum vacuum: 26kPa
* Maximum airflow: 3.5m3/minute
* Maximum efficiency: 36%
* Dimensions: 130mm
* Height: 114, 116 and 118mm
* Outer packing: 12 pieces/carton
* Loading volume:
800 carton/9,600 pieces per 20-foot
1,534 carton/18,408 pieces per 40-foot container
|
|
Since more than 25 years Giem is a leader in the field of induction motors characterized by high electromagnetic efficiency. Available in a rich variety of versions, they represent the most reliable solution for different applications in the thermal ventilation field.
Induction motor Ø 58
Long duration version available (ball-bearing)
Double speed version available
Thermal protection based on the motor impedance or by means of a thermostat or a fuse
Voltage: 12 -110 - 240 VAC
H class available
VDE and UL approvals on request
|
|
Main features of Iskra AC Induction motors:
* High efficiency.
* High specific power.
* Small size.
* Low noise operation.
* Long life without maintenance.
* Precise control.
|
|
Type
0RK1A-AW2J
Series
Reversible motors (1 W)
Technical data
Type
0RK1A-AW2J
Frame size [mm]
42
Output power [W]
1
Shaft type
round
Gear ratios [1:x]
no gear
Rated speed for 50 Hz/60Hz [r/min]
1000/1200
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.01/0.008
Protection class
IP20
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
|
|
|
|
Application
FEAS Solid State reversing contactors are electronic load relays, whitch be used for fast and loudless switching of three-phase asynchronous motors with be operated in both rotating directions. Because of the contactless operation the live span is nearly unlimited. Robust power semiconductors are implemented and they are schwitching in voltage zero crossover and generate so no additional high frequency noise pulses.
The equipment is integrated into a functional and sturdy case, which makes it insensitive to choke stress and vibrations. Also an application in aggresiv environment is unproblematic.
An installed temperature monitoring, signals an excessively high temperature rise before the equipment protects themselves and disconnects. If the implemented phase monitoring detect the loss of one phase, the start of the motor is retarded and this status is signaled, untill all three lines are present.
Operational principle
The semiconductor operates according to the principle of a zero crossover or a zero voltage switch. After applying the control voltage the power output (load circuit) of the semiconductor relay is opened, once the first zero point of the line voltage is reached. The typical time of response is shorter than the half period duration that means less than 10mS with 50Hz frequency.
Version
Installed and completely potted in an aluminum case for direct mounting on DIN rail.
|
|
|
|
|
|
APPLICATIONS
SAER submersible motors series CL 95 are suitable to be immersed in wells having diam. 4” and larger to be coupled to hydraulic submersible centrifrugal and peripheral pumps with 4” Nema coupling.CHARACTERISTICS
4” oil filled submersible motor, completely rewindable
Non –toxic oil (USA FDA, US Pharmacopoeia/National Formulary,
USDA (Department of Agriculture), European Pharmacopoeia
approved)
Flange and shaft protrusion in compliance with NEMA standards
4"
Degree of protection: IP 68
Insulation class: B
Shaft entirely made of stainless steel AISI 431
Outer shell made of stainless steel AISI304. Cast iron flange
A compensation membrane on the bottom of the motor ensures
the balance between the internal and external pressures, along
with the variation of the oil volume due to the temperature.
Triple seal system on rotor shaft: bi-directional mechanical seal
+ radial seal +sand-guard with laminar seal.
Single phase motors: PSC type (Permanent Split Capacitor).
Capacitor have to be provided by the customer.
Rotation: Single phase motors: counter clockwise facing shaft
end, three phases motors: clockwise or counter clockwise without
distinction.
Cable material suitable for use with drinking water.
All motors 100% tested (test report supplied upon request).
SAER submersible motors are suitable for use with frequency
changer. You can address to our technical servicing for any further
information.
|
|
Series: B... 63 to 355
Output range: 0.12 kW to 500 kW, higher output ratings available on request
Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request
Brake types: Lenze BFK458, KEB .08.210, Mayr 800.410.3, Stromag BZFM
Features: Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible
|
|
Pacesetter 30R AC Inverter Duty Motor
Quintsulation 5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31.
230VAC, 60 Hz, 3-phase for operation with a wide range of inverter products.
Inverter-Grade magnet wire and Class "F" insulation system for increased protection against spikes and corona damage caused by the inverter.
UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive "CE".
Standard Features:
Totally enclosed, non-ventilated IP-20 rating.
Class "F" insulation system for long life.
Aluminum endshields for high thermal efficiency and light weight.
Permanently lubricated, noise tested ball bearings.
Locked bearing design minimizes shaft endplay.
Application Information: Face mounting is standard.
|
|
Three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
Detailed information
Three-phase AC motors with motec
Standard three-phase AC motors; 0.25 to 7.5 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; the 8200 motec inverter is integrated
Detailed information
Three-phase AC motors with starttec
Standard three-phase AC motors; 0.25 to 4.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; the starttec motor starter is integrated
|
|
FRAME SIZE:
56 to 160 - aluminium deign
180 to 315 - cast iron design
OUTPUT:
0.09 to 200 kW
POLARITY:
single - 2, 4, 6, 8 poles (series AM)
pole-changing - 4/2, 8/4, 4/6, 6/8 poles (series AM and AMV for fan drives)
RATED FREQUENCY:
50 - 60 Hz
MOUNTING:
IM B3, IM B5, IM B35, IM B14, IM B34
DEGREE OF PROTECTION:
IP55 or higher
MAIN FEATURES:
motors comply with IEC requirements
TEFC construction
temperature rise to class B
standard rating comply with IE1 code; efficiency values according to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
IE2 efficiency code as standard from 180 frame
progressive motors on request
63 bearings from 160 frame
regreasing facility as standard from 200 frame
OPTIONS:
cURus certification
CSA certification
from frame size 90 operate on static frequency converters
encoder
forced ventilation
mechanical and electrical design on specific demand
|
|
|
We invite you to see motive catalogue to understand the peculiarities of this product. Few words are not enough to illustrate its advantages.
|
|
NEMA Three Phase Continuous Duty Motors
FEATURES:
60Hz
208.230/460 Voltage
NEMA Service Factor 1.15
Continuous Duty 40℃Ambient
Class B Insulation
High Efficiency
NEMA Design B
Ball Bearings
R0lled Steel C0nst ruction
lP5 5 Protection o r IP44 Protection
Stainless Steel Nameplate
APPLlCATl0NS:
Pumps
Compressors
Fans
Conveyors
Machine Tools
0ther General Purpose
Three Phase Applications
Petro-Chemical Plants
|
|
G2.. 132 bis 355
Output range 4.3 kVA bis 500 kVA
Speeds 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request
Features Designed to DIN EN 60034 (IEC 72), mounting dimensions and output assignment to DIN 42673, 42677 or progressive, robust, low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 available on request, class F insulation, class H available as an option, terminal box optionally top-mounted, RHS, or LHS, various modifications possible
|
|
WATT EUSAS motors are top quality three-phase AC industrial models from Watt Drive’s customer-oriented modular WATT MAS 2000 motor system.
EUSAS stands for EUROPA - USA - ASIEN and means that the wide voltage range and simple voltage selector in the terminal box enable the motor to be operated with virtually any supply voltage and frequency worldwide.
|
|
Construction
Mechanical protection: IP55
Insulation: Class F
Temperature rise: 80 K
Frames: are in cast iron, (except frames 180 - 225 which are in steel)
Terminal boxes: are in cast iron
Endshields/flanges: are in cast iron
Fans:
- Up to frame size 315 are in polypropylene, (except frames 180 - 225 which are in steel)
- On frames 355 and above, are in polypropylene or aluminium alloy.
Fan cover: in cast iron or pressed steel, capable to withstand impact of 7 Joule.
Finish: Industrial paint system, standard color RAL 5010.
Motor series BFGC (IIC): kW RPM
0.37 up to 450 kW 3000 RPM
0.25 up to 500 kW 1500 RPM
0.18 up to 450 kW 1000 RPM
0.12 up to 400 kW 750 RPM
Motor series BFG (IIB): kW RPM
250 up to 710 kW 3000 RPM
250 up to 900 kW 1500 RPM
200 up to 710 kW 1000 RPM
160 up to 630 kW 750 RPM
|
|
Three-phase short circuit asynchronous motor, frame-cooled.
- high efficiency reserve
- high switching frequency
- Solid construction and high reliability
- quiet and maintenance-free
- different mounting types to choose
- suitable for operation of a frequency converter
|
|
Standard type of motors range from 1/8HP to 20HP to met differing requirements, suited to individual needs.
Economical and general purpose-driproof type (EFOUP).
Rugged under most severe operating conditions-totally enclosed fan, cooled type (TFO).
Compactly designed equipment-flange mounted, totally enclosed, fan-cooled type (VTFO).
Internationally interchange ability/ Original "Hitachi WR grease".
High efficiency fan/ Low noise/ Low vibration/ Safety-assured design.
|
|
Asynchronous Threephase Motors:
- 2 poles - 3000 rpm
- 4 poles - 1500 rpm
- 6 poles - 1000 rpm
- 8 poles - 750 rpm
Threephase Double Speed:
2/4 poles - 3000/1500 rpm
4/8 poles - 1500/750 rpm
|
|
Asynchronous Threephase Motors:
- 2 poles - 3000 rpm
- 4 poles - 1500 rpm
- 6 poles - 1000 rpm
- 8 poles - 750 rpm
Threephase Double Speed:
2/4 poles - 3000/1500 rpm
4/8 poles - 1500/750 rpm
|
|
Y Series (IP23) Three-Phase Induction Motor
General:
The Y series (IP23) motor is a three-phase protection cage induction motor for common usage.
Features:
* Radial flow draft type, good heat dissipation performance, low temperature rise and a long life cycle
* High quality cast iron base and end-shell ensure better cooling performance, good dependence and a long life cycle
* Large stall torque
* High efficiency
* Small noise, slight vibration, reliable operation and easy maintenance
* Fine construction and appearance
* Could be manufactured to customer’s special needs under different voltages, double voltages, special frequency, special extension, biaxial extension, humid tropics and dry tropics etc
Applications:
The Y series (IP23) can be widely used in paper-making equipment, compressors, fans and pumps. It is especially suitable for equipment working in in-door environments like refrigerators.
|
|
Standard three-phase motors with squirrel cage rotor
Design industrial motor with aluminium housing
Main applications water and vacuum pumps, fans, compressors, drive systems, transmissions
Special applications machine tools, garden equipment, vehicles, elevator doors, food machines, extruders
Performance range 0,06 - 37 kW
Size 56 - 200
Standard three-phase motors with squirrel cage rotor
Design industrial motor with cast iron housing
Main applications chemical industry, ship and marine engineering, use under difficult environmental and general conditions
Special applications agricultural and construction machinery, hydraulic systems, mixing machines, stone processing equipment, separators
Performance range 37 - 315 kW
Size 225 - 355
|
|
- Considerably more power from smaller construction volume
- Optimised heat elimination by means of ventilation ducts
- Minimum lossed for maximum efficiency
- Energy saving over standard motors
- IP 54 / Insulation Class F
- Compatible with all Groschopp gearboxes
- Can be combined in principle with gearbox of other manufacturers
- Options available, e. g. brakes, sensor systems.
|
|
|
The standard motors in the designs B3, B5, B14 can be used with frequency inverters, also available as motors with integrated inverters.
|
|
|
|