|
|
|
|
|
|
ASYNCHRONOUS MOTORS
- Single-phase motors :
Single-phase LS : Aluminium alloy housing
- Three-phase motors:
LSES : High efficiency motor - Fixed speed
LSHT/FLSHT : High temperature Smoke extraction
FLS : Cast iron housing - Fixed speed
LS : Aluminium alloy housing - Fixed speed
LS Zone 22 : Aluminium alloy housing - Dust ATEX Zone 22
FLSES : Energy savings motor - Fixed speed
FLSC : Corrobloc finish motor - Fixed speed
FLSB/FLSLB : Slip ring wound rotor motor - Fixed speed
PLS : Open Drip Proof motor IP 23 - Fixed speed
LSMV : Variable speed motor
LSiA : Food and beverage applications motor
LS MO : Machine tool applications motor
LS FA : High ambient temperatures Ovens
LS/FLS 85°C to 150°C : High ambient temperatures Driers
LSPX : Aluminium alloy housing - Dust ATEX Zone 21
FLSPX : Cast iron housing - Dust ATEX Zone 21
FLS Zone 22 : Cast iron housing - Dust ATEX Zone 22
LSE zone 1 : Aluminium alloy housing - Increased safety - Gas ATEX
FLSD(E) zone 1 : Cast iron housing - Flameproof safety - Gas ATEX
FLSE zone 1 : Cast iron housing - Increased safety - Gas ATEX
LSN zone 2 : Aluminium alloy housing - Non-sparking safety - Gas ATEX
FLSN zone 2 : Cast iron housing - Non-sparking safety - Gas ATEX
VARMECA : Variable speed motor with integrated drive
With our Guaranteed Availability, determine your own delivery date!
|
|
Mounting size: 42mm - 104mm
Output power: 1W - 200W
Max. permissible torque: up to 40Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 100/110/115V AC or 220/230V AC
Protection class: IP54 for 200W-type
Marking: CE, UL and cUL
|
|
Mounting size: 80mm, 90mm and 104mm
Output power: 25W - 90W
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 230V AC
Protection class: IP67
Marking: CE, UL and cUL
Fixed speed motors.
|
|
Monoph tensions. 100/120V – 220/240V. 50Hz. Triph. 230/400V. 50Hz.
Special tensions and frequencies on request.
Direction of Monoph Rotation. with condenser and triph., reversible. With
centrifugal, reversible switch only with l’ stop.
Intensities of Starting has condensing or triph.: approximately 21⁄ 2 × L
nominal. With centrifugal switch: approximately 3 × L nominal.
Stages closed Rolls of the dice, lubricated with life by the manufacturer, with
discs springs of correction for silent walk.
Flexible connections Wire PVC 30cm. (SD18 and SD48 with box with
terminals).
Insulation Classifies “ F” (acceptable rise in temp. = 115°C with temp.
amibiante of maximum 40°C.)
Specifications B.S.5000 chap. II (IEC72) (CSA/UL on option).
|
|
|
MS series Aluminum housing three-phase asynchronous motors have good performance, safety and reliable operation, nice appearance , and can be maintained very conveniently, while with low noise, little vibration and at the same time light weight and simple construction. thhis series motors can be usder for general drive.
|
|
|
|
|
|
MS and MY series Transtecno motors are closed and fan cooled.
MS series includes induction threephase 4 poles motors
230/400 Vac at 50 Hz and 275/480 Vac at 60 Hz, 4 poles; it
covers power sizes from 0.09 kW up to 1.5 kW. These motors
run quietly and are dinamically well balanced; they match
quality, strength and cheapness.
MY series includes induction singlephase motors 230 Vac at
50 Hz and covers power sizes from 0.09 kW up to 0.75 kW:
they are particular suitable to be mounted on machine for low
power applications.As well as MS series motors, they match
quality and cheapness.
Both series are made in aluminum frame and are available
with B5 or B14 flange mountings.
Standard features for both the series are:
• Class F thermal insulation
• IP55 enclosure protection
• PTO thermostat for overheating protection
• Phases separators between windings: this feature
makes these motors particularly suitable for use with
variable frequency drives.
MY series motors have a large terminal box, which includes
the run capacitor, in order to protect it from external environment.
|
|
|
|
|
|
Applications
Pumps
Fans
Crushers
Conveyors
Machine tools
Milling applications
Centrifugal machines
Presses
Elevators
Looms
Grinders
Woodworking
Cooling
Packaging equipment
Other severe duty applications
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast iron frames (63 up to 355M/L)
Mounting B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor/Aluminium die cast
V'Ring on both endshields
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Ventilation Motor, TEAO
Forced Ventilation, TEBC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
The broad AMK motor program offers you the right motor for every application: High-torque motors, hollow-shaft motors, geared motors, integrated motors as well as customer-specific motors. The motors are available in a variety of power classes, types of construction, and cooling types. They excel by high reliability, high dynamics, small dimensions, low moments of inertia, and largely no maintenance. You can implement standard as well as high-end solutions.
Asynchronous servo motors:
- Asynchronous servo motors of series DH
- Asynchronous servo motors of series DW (liquid-cooled)
- Asynchronous servo motors of series DV
|
|
T-T Electric proposes a series of square frame ac motors for variable speed applications with flux vector control types.
This asynchronous motor has been developped and designed to achieve the same high performance and dimensions as dc motors of similar power.
The AC Square motor complies with IEC 60034 standards and responds to the requirements for most industrial applications. The compact and flexible square frame design facilitates its integration into all types of machinery.
AMP
• 3 phase 230V-400V
• 4 poles
• Output: 1-300 kW
• Torque uo to 2050 Nm
• Speed up to 8000 rpm
• Center heights: 90,100,112,160,180,225 mm
|
|
The electric motor is the heart of the drive. ABM electric motors are induction motors of a squirrel-cage design. This design of motor has become the most important type of industrial drive units.
An ABM electric motor offers you:
complete maintenance-free operation
energy-saving with approx. 90 % efficiency
an environmentally friendly type of drive (compared with internal combustion engine hydraulics, pneumatics)
extremely reasonable cost/performance ratio
ABM motors are available as a standard motors or as drive motors for geared units.
ABM Rotary Current Motors
construction size 56-180
output up to 30 kW
system of protection up to IP 66
rated speed up to 3000 min-1
constant speed : 2-, 4-, 6-, 8-, 12-, 16-pole
pole-switching: 4/2-, 6/2-, 8/2-, 12/2-, 16/2-, 8/4- or 8/6-pole
standard mounting arrangements: B3, B5, B14
ABM Single-Phase Motors
frame sizes 56-90
ratings up to 3 kW
split phase: start and run capacitor, auxiliary windings etc.
standard mounting arrangements: B3, B5, B14
|
|
Good heat dissipation
through ribbed aluminium cast housing and integrated fan
Versatile compatibility
Well-graduated gear series, parking brakes, optional incremental encoders
|
|
Applications
Professional Floor Care
Low Speed Scrubbers
120 & 240 VAC, 50 or 60 hz
2 and 3 planet gearboxes
7.1:1, 10:1 and 11:1 Ratios
Class F insulation
Conduit Box for easy connection
High Torque/Low Running Amps
1 HP or 1.5 HP
7" diameter
UL and CUL listed
Rugged Construction
Start/Run Capacitors
Aluminum Frames
Various Motor wraps and colors including chrome and brushed aluminum
|
|
• All exterior components of 300 series stainless steel,
including motor frame, endshield and conduit box
castings
• Endshields o-ring sealed to frame
• IEEE 841 severe-duty features standard
• Meets demanding pharmaceutical requirements; also
excellent for chemical-processing applications
involving nitric acid and caustic lye
• Incorporates all WASHGUARD mechanical and
electrical features, plus IRIS™ insulation system
• BISSC certified
• Viton seals, gaskets, and o-rings
• Hydrophobic breathers
• NEMA, DC, JM Pump and Brakemotors available
from stock
|
|
|
The asynchronous motors of the series 13.710 are compact and space-saving. Available in a power range from 12 to 90 W, these motors are naturally ventilated. Since they do not have a fan they have low noise emissions and can be applied in production areas with fluff or dust. The motors are available with solid shaft and keyway, with flange mounting and can be fitted with a brake.
|
|
Induction Motors
Capacitor-run, single-phase and three-phase motors are available. Lead wire type, terminal box type and conduit box type motors are available depending upon how the power source and the motor are connected.
For unidirectional or bidirectional (after coming to a stop) continuous operation.
|
|
Type
4IK40A-BW2J
Series
Induction motors (High Speed Type)
Technical data
Type
4IK40A-BW2J
Frame size [mm]
80
Output power [W]
40
Shaft type
round
Rated speed for 50 Hz/60Hz [r/min]
2400/2900
Max. permissible torque for 50 Hz/60 Hz [Nm]
0.16/0.135
Power supply
single-phase 100 VAC
RoHS-compliant
yes
|
|
|
|
|
|
FRAME SIZE:
63 ... 160 - aluminium frame
OUTPUT:
0.12 ... 22 Kw
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3, IM B5 and IM B14 standard and special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
motors conforming to IE1 code; 2 and 4 poles motors conforming to IE2 code efficiency values according to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
external fan (IC411)
- VERY HIGH- TORQUE A.C. BRAKE - series AMF
very high braking torque (Mb > 2 MN)
continuous braking torque adjustment in the range 30% ... 100% Mb max
standard braking torque setted at 70% Mb max (on request 30% ... 100% Mb max )
double braking surface
high braking capacity, powerful and precise
standard brake supply: 230/400V-50 Hz with separate terminal block
axial hand release always supplied loose
TYPICAL APPLICATIONS: heavy duty, lifting, cranes/bridge cranes, ceramic machines and wherever a very high intervention frequency and a powerful and precise braking is required
- HIGH TORQUE A.C. BRAKE – series AMBZ
very high braking torque (Mb > 1.5 MN)
double braking surface
TYPICAL APPLICATIONS: automation with high intervention frequency, gear motors, lifting, handling machineries
SPECIAL EXECUTIONS:
efficiency values conforming to EPAct; flywheel, anti-sticking brake disk; degree of protection IP56
|
|
|
|
|
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply failure. The brake supply is DC as standard with the rectifier built in the terminal box. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
|
|
|
|
FRAME SIZE:
63 ... 160 - aluminium frame
OUTPUT:
0.12 ... 22 kW
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3 ,IM B5 and IM B14 standard or special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
motors conforming to IE1 code as standard; 2 and 4 poles motors conforming to IE2 code efficiency values according to IEC 60034-30;2008; efficiency testing method IEC 60034-2-1;2007
external fan (IC411)
- HIGH TORQUE DC BRAKE - series AMBY
high braking torque (Mb > = 1.5 MN)
step adjustment braking torque (~33%; 67%; 100% Mb max)
double braking surface
progressive and noiseless braking
a.c. brake on request (series AMBZ)
Typical applications: gearmotors, lifting, packing machineries, transfer machineries, automation requiring a smooth intervention
- LOW TORQUE DC BRAKE AND REDUCED OVERALL DIMENSIONS - series AMS
non adjustable braking torque (Mb < = MN)
increased braking torque (+50% of the Mb catalogue value)
single braking surface
progressive (cast iron fan) and noiseless braking
Typical applications: woodworking/cutting machineries, automation requiring progressive braking, wherever a long braking periods and high braking duties are required
SPECIAL EXECUTIONS:
certification cURus; hand release lever; encoder; axial independent cooling fan; double shaft
|
|
|
|
|
|
BA series motors are asynchronous, three phase, self-braking. BA series power range is from 0.25 kW up to 45 kW. The motor brakes in case of power supply failure.
The brake supply is AC as standard. On request is available a DC brake (the rectifier is enclosed in the conduit box) and or a separate brake supply.
BA series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BA series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BA series motors are provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132 mm. On request 132 frame size motors can be supplied with cast iron frame.
Frame, shields and flanges are cast iron made from 160 up to 225 frame size.
BA series main features are the robust construction, a very short braking time, an high and constant braking torque, frequent and heavy braking cycles, rare and easy maintenance. All MGM motors are CSA approve
|
|
Delphi ATDC series self-braking motors use spring-pressure brakes, firmly spliced onto a cast iron shield at the back of the motor.
These motors include:
+ The hand release lever that permits to release the brake, making it possible to move the shaft.
+ The separate brake power supply that is achieved, whenever needed, by connecting directly to the brake terminal board located inside the motor terminal box.
+ The PTO thermal protectors in the winding
Delphi ATDC series maintain also the peculiarities described in the Delphi series catalogue
|
|
MSBCCL series -enclosed construction externally ventilated -sizes 63 ~ 160
The brake-motors of the MSBCCL series result from coupling an asynchronous three-phase motor and an electromagnetic D.C. brake unit. Due to their reliability and operating safety, as well as their quick braking time (connection & disconnection time = 5~80 milliseconds) they are suitable for a great variety of applications, as:
- Braking of loads or torques on the driving shaft.
- Braking of rotating masses to reduce any lost-time.
- Braking operations to increase the set-up precision.
- Braking of machine parts, according to safety rules.
|
|
Clutch & Brake Motors
This compact precision motor is equipped with an internal clutch and brake mechanism. This combination makes it ideal for applications involving frequent START/STOP operation, positioning, indexing, jogging and incremental feeding.
Suitable for high-frequency operation
Compact design
Highly reliable gearheads
|
|
|
SEW-Eurodrive's squirrel-cage motors and brakemotors deliver exceptional performance and reliability combined with low maintenance. Designed for continuous duty under tough service conditions, these low-noise brakemotors are used wherever fast, safe braking is a major application requirement.
|
|
|
Today's venetian blind motors are the result of decades of experience and co-operation with manufacturers of blind systems. The constant development process, which results out of this co-operation, led to products of a high level in technique and quality.
|
|
GE ASD Inverter Duty:
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors, and other inverter duty appliccations.
Features and Benefits:
- Standard Features
- Infinity:1 CT Speed Range CH to 90 Hz
- IGBT Compatible
- N/C thermostat
- Opp DE mounting face & stub shaft for tach mounting
- C-Face foot mount thru 30 HP
- Cast Iron Frame & Brackets
- Class F Insulation
- 440 Fr have insulated ODE brg/Grd brush
|
|
Appliance Motors
Applications
Semiautomatic washing machines of unique speed, automatic washing machines top load and automatic washing machines front load.
Characteristics Standard
Single-phase motors
Unique speed (4 poles) or double (2/12, 2/16, or 2/18 poles)
Permanent Capacitor
Thermal protector
Level of protection IP00
Isolation class "B"
Tension 110V or 220V
Frequencies: 50 or 60Hz
Rests with bearings or bushings according to application
Optional Main
Axis with pulleys
Fixation by spear
Fixation by the legs
|
|
Brushless permanent magnet motors from Iskra Avtoelektrika combine high performance and high reliability with a simple and therefore the best price-performance motor design. The motors offer high efficiency over a wide speed range and high torque at low speeds.
The motor construction with no commutator and brushes, no slots and windings on the rotor provides very low acoustic noise and torque-ripple.
With the addition of an efficient electronic controller already incorporated in the motor construction, the motor and electronics represent a single compact drive unit, and this type of motor becomes acceptable for many applications.
|
|
|
|
|
|
The motors with integrated encoder represent a revolutionary component in the automation field offering to the OEM and to the end user new opportunities and notable economy advantages due to its user-friendly design. The new range of three-phase asynchronous motors with integrated encoder has been designed specifically to offer the end user a comprehensive choice of an already widely tested three phase motor, with superior quality. Two main choice of MGM motors with built-in are available: brake motors (BAE/BMEAV) and standard motors (SAE/SMEAV). The power range starts from 0.06 kW up to 45 kW (from 56 up to 225 frame size).
The unit consists of a three phase asynchronous motor with high efficiency and low moment of inertia and with the actual encoder located in the back (ND-side). MGM motors are suitable for inverter use. The mechanical coupling is the same of a standardized motor (special shaft and flange are available on request), wirings are very simple: power and electrical signal are separated.
MGM motors with built-in encoder can be supplied in conformity with requirements of standards UL 1004 “Electric motors” and CSA 0 22.2 No. 100-95 Motors and generators” (c CSA us approval).
|
|
Applications: For normal medium and high thrust in-line pump applications.
Waste water treatment plants, petro chemical industries, pulp and paper mills and agricultural irrigation applications.
Features: Severe duty construction with corrosion-resistant epoxy finish, cast-iron construction, designed for vertical mounting. Rotatable conduit box, stainless steel nameplates, shaft seals. Energy efficient windings. Two lifting lugs for balanced lifting. VHECP motors have NEMA Premium® efficiency and are Inverter-Ready. 1.15 Service Factor.
|
|
|
|