|
|
|
The motors are solidly designed and are maintenancefree for life.The multi-grooved stator contains a threefold winding which, together with the phase-shifting capacitor, creates a symmetrical rotating field at the rated working point of the motor.The rotor is of the squirrel-cage type. Two- or four-pole motors with a variety of design Iengths and diameters provide rated torques from 0.75 to 12.6 Ncm. Can be combined with reduction gear units, brakes, and tachogenerator systems.
|
|
K-2 Series AC Induction Motor
Horsepower: 1/1600 to 1/200 HP
Rated Torque: 0.31 to 3.2 oz-in
Phase: Single Phase
30R Series AC Induction Motor
Horsepower: 1/40 to 1/30 HP
Rated Torque: 10 to 20 oz-in
Phase: Single Phase
34R Series AC Induction Motor
Horsepower: 1/15 to 1/5 HP
Rated Torque: 38 to 119 oz-in
Phase: Single and Three Phase
42R Series AC Induction Motor
Horsepower: 1/12 to 1/4 HP
Rated Torque: 48 to 148 oz-in
Phase: Single and Three Phase
48R Series AC Induction Motor
Horsepower: 1/5 to 1/2 HP
Rated Torque: 112 to 296 oz-in
Phase: Single and Three Phase
|
|
|
ElectroCraft's SolidPower Plus AC motors are designed from the ground-up to create efficient, low-noise power. Annealed laminations and stator windings electronically matched to your application ensure efficient operation. While dynamically balanced, skewed rotor bars and precision-machined fits, keep noise and vibration down.
|
|
The induction motor is the most commonly used type of ac motor. Its simple, rugged construction costs relatively little to manufacture. The induction motor has a rotor that is not connected to an external source of voltage. The induction motor derives its name from the fact that ac voltages are induced in the rotor circuit by the rotating magnetic field of the stator.
ARC's complete lines of AC Induction Motors are manufactured using a squirrel cage rotor utilizing both aluminum and copper bars. Speed and torque can be tailored to individual requirements by changing the conductivity of the rotor bars. Custom units that operate at other frequencies are available.
|
|
|
The general AC induction electric motors are designed with IEC standard. These motors fit a variety of industrial applications and it is convenience for new and used applications. Electric motor power is available from 0.25 to 20HP. The frame is from 63 to 160. There are high efficiency series available. These motors are designed to meet high efficiency standard in varied-countries. High efficiency electric motor power is available from 1 to 10HP. The frame is from 80 to 132.
|
|
BISON 100 SERIES
The 100 Series offers a wide speed range and many voltage options in an ultra-compact package. Up to 100 In-lbs. Continuous.
|
|
Our Universal (120 - 240 VAC Input) motors are based on our popular
Round K, Square K, and B-style laminations, with operating speeds
up to 30,000 RPM. These cost effective motors typically include
customer specific lead terminations, mounting details, housing
types, and overheating protection. We have extensive
experience in induction motor conversions.
|
|
T-T Electric propses a series of three phase TAC-A ac motors in aluminium frame sizes 56 up to 132 and from 0.09 up to 11 kW. These fan cooled squirrel cage motors are totally enclosed (IP55 protection) and are manufactured using the latest state of the art technology.
TAC-A AC Motors
• Aluminium frames
• 2/4/6/8/10/12 poles
• Frame sizes 56-132
• Outputs up to 11 kW (14 HP)
|
|
400 thru 2000 HP
Three phase
5811 thru 8011 frames
1800 rpm and slower
50 and 60 hertz
Product Overview
The TOTALLY ENCLOSED TUBE COOLED TITAN® motor type JT has a cast iron and heavy fabricated steel construction with oversized grease lubricated antifriction bearings. To ensure a high degree of corrosion resistance, steel tube construction is standard. Further, the top hat assembly is treated with a Vacuum Pressure Impregnation cycle of 100% solid epoxy coating all surfaces. The VPI system, along with other internal and external protective treatments, provides exceptional durability in hostile environments. The winding is constructed with full Class F materials and receives two cycles of 100% solid epoxy VPI.
U.S. Electrical Motors offers a wide range of totally enclosed motors designed to provide years of trouble-free service in your most demanding applications. Included in this group are fan cooled machines supplied with a top-hat mounted air-to-air heat exchanger.
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 30Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 110/115V AC or 220/230V AC
Marking: CE, UL and cUL
|
|
Mounting size: 60mm - 90mm
Output power: 6W - 90W
Speed range: 90 - 1400r/min for 50Hz, 90 - 1600r/min for 60Hz
Max. permissible torque: up to 20Nm
Gearheads: 20 different gear ratios of 1:3 - 1:180
Power supply: 200 - 230V AC or 100 - 115V AC
Marking: CE, UL and cUL
|
|
The motors type EL are thought to be installed on wood, aluminium, granite, marble and stone processing machines where high performances in a compact design are required.
Ideal for tenoners.
TECHNICAL FEATURES:
STATOR: windings featuring double encapsulation
ISOLATION CLASS: F or superior.
BEARINGS: Front: 2 deep groove ball bearings for EL11; angular contact ball bearings for axial and radial loads for EL 13 and EL 16.
Rear: deep groove ball bearing
MAXIMUM SPEED: 6.000 rpm.
ROTOR: squirrel-cage rotor
HOUSING: high resistance extruded aluminium
BEARING HOUSINGS: front and rear bearing housings made of cast iron
COOLING: self cooling with fan
TOOL FIXING: Shaft provided with key and threaded output
IP CLASS 54.
UPON REQUEST: Varnishing, different power and polarities
Speed of 9.000 rpm. (with front pre-loaded precision bearings)
|
|
|
|
|
|
Standard Features
Output: 0.12 up to 7.5kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Aluminium frames (63 up to 132M)
Mounting: B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor /Aluminium die cast
V'Ring on both endshields
Stainless steel nameplate AISI 316
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Ventilation Motor, TEAO
Forced Ventilation, TEBC
Thermal protection:M
Thermistors
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Mounting information
The foot mounting system offers great flexibility and it is quite simple allowing change on the mounting configuration without requiring any machining or modification on the motor feet.
Motor terminal box can also be rotated at 90 degrees allowing motor leads to be connected on any motor side.
|
|
The three-phase motors 3MA series, closed, externally fan cooled, manufactured according to the main international standards and particularly to the IEC 34 and 72 rules , are available in the sizes from 63 up to 132 , with pole number 2, 4,6 and 8 and with output power from 0,12 kW up to 11 kW.
They are featured by aluminium die-cast frame with removable feet, by the IP 55 protection level, by the F class insulation and by shielded type for life lubricated bearings.
|
|
MS series aluminium housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality and conform to the IEC standard.
MS motors have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time light weight and simple construction. These series motors can be used for general drive.
|
|
Type Code: AEAL / AEAU
Low Voltage Aluminum Frame Motors
Multi Mounting
Output 0.12 ~ 7.5 KW
Pole (Speed) 2 ~ 8
Voltage 220 ~ 575V
Frequency (Hz) 50, 60
Frame Size 63 ~ 132M
Protection Enclosure IP 55
Design Standards: BS, AS, BSEN 60034
Environment: non-hazardous
Stator insulation: Class F Insulation, 1.0 SF.
|
|
|
Baldor's line of brake motors are available in totally enclosed fan cooled, open drip proof, or explosion proof designs, in either single or three phase. Stock ratings are available from .25 horsepower through 30 horsepower. These motors use a mechanical spring set brake with a manual release. Brake motors may be used on machine tools, conveyors, door operators, speed reducers, hoists, or any application requiring quick stops and positive holds.
|
|
The IEC-normalized BN motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the 0.06 - 30 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual pole version available with generally, three brake options offered, one DC and two AC supply, lending further flexibility to the system. Finally, all motors are inverter duty.
|
|
|
|
|
|
ASYNCHRONOUS BRAKE MOTORS
- General use single phase:
LS FMC : DC - Aluminium alloy housing
- General use three-phase:
LS FCR : Aluminium alloy housing
LS FAP : Alternating current - Aluminium alloy housing
LS FCPL : DC - Aluminium alloy housing
LS FMC : DC - Aluminium alloy housing
FLS FCR : Cast iron housing
FLS FAP : Alternating current - Cast iron housing
FLS FCPL : DC - Cast iron housing
- Lifting use:
LS FCR (UL) : Aluminium alloy housing
LS FCPL (UL) : DC - Aluminium alloy housing
- Translation use:
LS FCR (UT) : Aluminium alloy housing
LS FCPL (UT) : DC - Aluminium alloy housing
- Variable speed:
LS VARMECA FCR : Decentralised variable speed
LSMV FCR : Centralised variable speed
LSMV FCPL : Centralised variable speed - Continuous current
- Atex:
LSPX FCR : Dust ATEX Zone 21 - Aluminium alloy housing
FLSPX FCR : Dust ATEX Zone 21 - Cast iron housing
- Variable speed Atex:
LSPX VARMECA FCR : Dust ATEX Zone 21 - Decentralised variable speed
LSMVPX FCR : Dust ATEX Zone 21 - Centralised variable speed
LS VARMECA FCR Zone 22 : Dust ATEX Zone 22 - Decentralised variable speed
LSMV FCR Zone 22 : Dust ATEX Zone 22 - Centralised variable speed
- Food industry:
LSiA FCR : Enclosed three-phase brake motors
- Machine tool:
LS FCR (MO) : Machine tool enclosed three-phase brake motors
Guaranteed availability - Please determine reception date !!!
|
|
|
The asynchronous motors brakes of the series "BA" are equipped D ‘ a three-phase brake (System patented MGM). This type of brake ensures a fast and precise thanks to high stalling torques and adjustable braking and very reduced response time without artifice of cut. On request, it can be equipped with brake D.C. They pre-are equipped d’ a manual releasing and d’ a device of hand drive operation. Powers: 0,08 to 37 kw Sizes: 71 to 225 Mono-speeds: 2,4,6,8 poles bi- speeds: 2/4 – 2/6 – 2/8 – 2/12 - 4/6 – 4/8 – 4/12 poles etc… Engines with special characteristics lifting Many options available. Homologations: THIS – UL – SCUMS.
|
|
Standard Features
Output: 0.12 up to 7.5kW
Multivoltage – (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast Iron Frames (63 up to 132M)
Mounting: B3T
Degree of Protection: IP55
Terminal block
Squirrel cage rotor/ Aluminium die cast
V´Ring on both endshields
Stainless steel nameplate AISI 316
Class “F” insulation
Continuous duty
Ambient temperature: 40ºC, 1000 m.a.s.l.
Metric thread cable entries in terminal box
Suitable for Inverter Duty applications*
Paint color: RAL 5007
*For additional details about Inverter operation, please contact our technical support.
*Special Insulation for voltage above 575V
Optional Features
Single Voltage (other voltages)
Other mounting configurations
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class “H” insulation
|
|
|
With the X-Class, Force Control transforms oil-shear technology into affordable, off-the-shelf designs. Four standard models-XB1, XB2, XB3, and XB4, covers the most popular size range for brakes. Convenient double C-face or motor brake mounting and Clamped-Split-Quill allows drop-in, bolt-up installation.
|
|
Design with single-disk, spring brake
Main applications machine tools, timber processing, drive technology, transmission, process technology
Special applications winches, jetways, elevators, stage equipment, printing machines, packaging machines
Performance range 0,06 - 37 kW
Size 56 - 200
|
|
|
Grove Gear offers a lightweight alternative to both cast iron worm and coaxial (inline) helical gear reducers. Although there are pros and cons to cast iron and aluminum, one application might strongly lean toward cast iron where another may require only aluminum construction. The Grove designed aluminum gear reducers have some very distinctive advantages including: lightweight and compact construction, lower purchase and shipping costs and extreme mounting flexibility. In addition, the paint-free exterior of Grove aluminum reducers makes them a perfect solution in many applications, including washdown; food, chemical and pharmaceutical processing.
|
|
Type Code: AEALZB / AEAUZE / AEAUZF
Aluminum Frame Induction Brake Motors
Low Voltage, TEFC, AS, BS Design B
Output 0.12 ~ 18.5 KW
Pole (Speed) 2 ~ 6
Voltage 380V, 400V, 415V
Frequency (Hz) 50
Frame Size 63 ~ 132M
Protection Enclosure IP 55
Design Standards: BS, AS
Environment: non-hazardous
Stator Insulation: Class F Insulation, SF 1.0
|
|
Product Overview:
Baldor is the largest motor and mechanical power transmission company in North America and the second largest worldwide. Baldor•Reliance® motor products now range from 15 watts to 11,000 kW. Our range includes:
• 'Super-E' motors that exceed the new IEC 60034-30, IE3 rating for efficiency
• NEMA motors that cover every need for OEM exporters
• NEMA Premium Efficiency rated motors, meeting the new EISA legislation covering motors supplied into the USA
• We also offer broad lines of brake-motors, explosion-proof, C-face, pump-motors and gear-motors to provide solutions for any purpose or environment.
• Custom motors to meet client specific requirements. Custom motors are manufactured to the shortest lead times in the industry.
|
|
The IEC-normalized BN motors comply with all the applicable international standards, including the EMC and LV Directives. They are available in the 0.06 - 30 kW range in the foot and the flange mounting version, the latter in both the IM B5 and the IM B14 configuration. Single and dual pole version available with generally, three brake options offered, one DC and two AC supply, lending further flexibility to the system. Finally, all motors are inverter duty.
|
|
|
Iskra AC motors are four-pole induction motors with Al squirrel cage rotor and three phase winding on the stator. With their robust construction and superior output performance they represent the best traction and pump motor solution on forklifts and other electric vehicles. The best drive performances and system efficiency can be achieved in combination with Iskra AC controllers.
|
|
|
|
|
|
Three-phase geared motors
Popular geared motors with constant speed and high functionality; power range 0.06 to 45 kW; output torques of up to 9,000 Nm
Detailed information
Geared motors - inverter variable speed drives
Popular industrial geared motors combined with electrical adjustment via 8200 motec frequency inverter; power range 0.25 to 7.5 kW; the distributed drive solution
Detailed information
Geared motors - electronic starter
Popular industrial geared motors combined with the electronic starter starttec; power range 0.25 to 4.0 kW; the distributed drive solution
Detailed information
Geared servo motors
Highly dynamic geared servo motors with synchronous and asynchronous servo motors; max. torque: 7 - 9,000 Nm; low backlash
Detailed information
Gearboxes - with shaft or flange input
Speed reduction gearboxes with free shaft or IEC flange at the input side suitable for motors to IEC 72; output torques of up to 9,000 Nm; finely stepped output speeds
Detailed information
Geared motors - mechanical belt adjustment
Popular industrial geared motors combined with mechanical adjustment via Simplabelt compact units; power range 0.25 to 45.0 kW; adjustment range 1:6
Detailed information
Geared motors - mechanical adjustment Disco
Popular industrial geared motors combined with mechanical adjustment via Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Disco variable speed drives
Mechanical adjustment with Disco variable speed drive; power range 0.25 to 7.5 kW; adjustment range 1:6
Detailed information
Standard three-phase AC motors
Standard three-phase AC motors; 0.25 to 22.0 kW 3 x 230/400 V; enclosure IP 54; mountings B3, B5 or B14; these motors are optimised for operation with a frequency inverter
|
|
|
|
AC asynchronous electric motors
