Accessories for electric motors

82 companies | 169 products
Filters
  • What’s new?
    Submit

Specifically designed for starting and protecting motors that are commonly found in manufacturing machines, logistics and material handling systems, and small...

DE1 Variable Speed Starter

The new PowerXL™ series DE1 as a Variable Speed Starter closes the gap between motor starter and drive by taking the key benefits from both the starters...

Motor starter MSC-D

Whether coordination type 1 or coordination type 2, PKZM0 motor-starter combinations with DIL contactors master short-circuit currents up to 50 kA.

Eaton has made effective...

Motor starter MSC-DE - ready for "IE3"

The MSC-DE, manufactured by EATON, are modular standard components made for motor starter configuration. This device is suitable with another unit as well as accessories of the PKZ system, which fulfill the customer’s specific demands for...

The Electronic motor starter RAMO 4.0 has standard frame sizes suitable for power ranges from 0.3 up to 3.0 kW at 400 V, 50/60 Hz with up to 3000 switching...

{{productDetail[5067]}}

The MS495-100 manual motor starter is a 70 mm width devices with a rated operational current of Ie = 100.0 A. This device is used to manually switch on and off motors and to protect them reliably and without...

The MS450-50 manual motor starter is a 55 mm width devices with a rated operational current of Ie = 50.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need...

The MS496-100 manual motor starter is a 70 mm width devices with a rated operational current of Ie = 100.0 A. This device is used to manually switch on and off motors and to protect them reliably and without...

The MS116-0.16 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 0.16 A. This device is used to manually switch on and off motors and to protect them reliably and without...

The MS325-0.16 manual motor starter is a 54 mm width devices with a rated operational current of Ie = 0.16 A. This device is used to manually switch on and off motors and to protect them reliably and without the need...

{{productDetail[123473]}}

The AC starter has a wide range or platform products with output powers matching engine sizes between 200cc and 500cc. The Johnson Electric product line that is considered...

Johnson AC Starter series offers a variety of platform applications with output power matching to engine sizes between 200 cc to 500 cc.

When it comes...

A variety of products suitable for applications for ATV’s and motorcycles to ride-on lawn mowers are covered under the DC Starter series. There are low voltage DC (up to 12V) and...

The DC starter series by Johnson electric delivers a slew of products to cope up with the requirement of applications varying from ATV's and motorcycles to ride on lawn...

The DC standard series is designed to provide an enhanced platform of products to suit various applications ranging from ATV’s and motorcycles to ride-on lawn mowers. The starters are available in low voltage DC...

{{productDetail[665]}}

Lovejoy presents RunRight self-tensioning motor mounts suitable for all friction belt drives.

The mounts transmit power free of maintenance and slippage, while providing ample protection to the belt. It eliminates the need for compensating for belt elongation on a regular basis. Any extra tension on...

{{productDetail[7199]}}
{{productDetail[32592]}}

The innovative high tech CIM and MIM components from maxon motor GmbH from Sexau in Germany, other than producing standard and special gear heads, has a detailed knowledge and expertise in power injection molding for very...

{{productDetail[7173]}}

Engineered by NORD, the innovative motor starter SK 135E is designed specifically for the starting and stopping of drive units typically applied in the field of material handling....

{{productDetail[4808]}}

A broad range of standardised machine elements is offered by mbo Osswald.

These include axle holders in accordance with DIN 15058, set collars as per DIN 705,...

{{productDetail[15621]}}

Stahl, the world's leader in motor starters, offers 2 different standard models available in the market today: the Standard Motor Starters Series 8225 and Standard Motor Starters...

{{productDetail[9224]}}

WEG's Enclosed Direct-on-Line Starters DLW are built to switch and secure three-phase and single-phase electric motors. A specifically designed and projected starter is...

{{productDetail[12491]}}

Eaton is pleased to announce the Electronic Motor Starter, the latest technology to come from Eatons IEC control offering. The EMS is...

The A200 Series of NEMA non-reversing starters features a CSA certificate in addition to being recognized and listed by UL. All models contain...

In single-level applications rated 3hp at 240V AC or 2hp at 230V DC, B100 Manual Motor Starters can be utilized. By fixing the three...

Eaton DS7 soft start controller replaces, without any difficulty, existing soft starters, wye-delta starters, or NEMA/IEC across-the-line starters.

A...

The S701 line of soft start controllers from EATON is used with a manual motor- or a full voltage-...

{{productDetail[9191]}}

NEMA Manual Motor Starting Switches are specially designed for use in motor starting installation. The Bulletin 600 switches...

SMC™-50 compact status smart motor regulators are accessible in three casing dimensions and vary from 180 A to 520 A. This microchip...

Bulletin 280/281 ArmorStart® Distributed Motor Controllers are specially designed to offer your on-machine architecture with simple, cost-effective...

{{productDetail[5071]}}

The ArmorStart Distributed Motor Controllers from Rockwell Automation is a low voltage starter that...

{{productDetail[9138]}}

The CIM motor starter is a continuous on-line unit, composed of a contactor equipped with a...

DANFOSS Europe offers a wide array of refrigeration and air conditioning products. Among...

{{productDetail[35691]}}
{{productDetail[23470]}}

The MOVIFIT® MC / SC / FC contactless electronic motor started by Sew Eurodrive rotates in one direction when connected to 2 motors (dual starter) and rotates in 2 directions when connected to 1 motor (reversing starter....

{{productDetail[283]}}

EPM electrolytic starters are the devices that are used to start slip-ring motors that range from 500 kW to 20,000 kW. The power that is required to drive the motor by resistance variation is supplied by these starters. It is designed with the purpose of providing controlled...

RLV vapormatic starters are used when there is large inertia or low rating power of the driven machine. ,.The short circuit contactor is the only moving part unaffected by...

The RED series offers a wide array of statormatic motor starters that are constructed with immovable components aside from the short circuit contracted. Their starting period does not possess any...

The NOVADEM S3 (NS3) is a soft starter unit designed for the controlling of all starting, stopping and protection aspects found in 3 phase squirrel cage motors of up to 1200 kW at 690 V. This a...

{{productDetail[7451]}}

High Current Carbon Brushes with Special Holders act as current transfer elements that can transfer electrical current from a static component to a moving one continuously and also in the opposing direction....

{{productDetail[19751]}}

The ES400 - 3 Series, manufactured by Fanox®, is a soft starter for protection and control of motors and generators that is utilized...

This Product has very low maintenance cost. There is no pressure surge when pumps and compressors are used. It reduces hammering. Start-up process experiences less...

The ES400-25 model is a soft starter that is ideal for use in three-phase induction motors with a rated power lesser than or equal to 22 kW. It can also be used as...

{{productDetail[20885]}}

China Motor base manufacturer & exporter provides...

{{productDetail[55875]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation