|
|
| Products 121 to 150 of 253 |
| BARCO "C" Group Rotary Joints are available in a special design, precision fitted for hot oil/therminol applications. Available in 1/2" through 3" sizes, BARCO "Hot Oil" joints are recommended for applications using Mobiltherm 600, Dowtherm and other heat transfer fluids. These joints are designed to be used in circulating systems with temperatures up to 600°F (316°C). |
|
| Deublin steam joints are avilable with either a single bushing / bearing or dual bushing / bearing. Bracket, rod or bell supported stteam joints are also available where external support is essential due to a combination of large size andf / or high speed applications. |
|
Rotary Unions are self-contained and self-supporting rotary seals used to transfer fluids such as steam, water air or oil, to and from rotating machinery.
Standard units are of steel and iron construction with specials available in, for example, stainless steel and nickel alloys for chemically aggresive fluids or food quality applications.
The range of standard models in three basic types for single or dual flow are available with a choice of ball bearings for temperatures up to 160 degrees celsius and with plain cylindrical carbon bearings for temperatures of 100 degrees celsius up to 300 degrees celsius. Pressure range is 70 bar with rotational speeds up to 5000 rpm. In many instances it is possible to exceed these conditions after first consulting the Filton technical department for advice. |
|
* GR Special Design Features :
2", 2-1/2" and 3" rotary siphons
Antimony seals and bearings in the GRX provide longer life, especially on higher speed machines.
Two widely spaced bearings for stability, greater siphon support and longer wear.
Sleeves are dual-driven by two keys to give greater resistance to side load and eccentric motion.
External seal wear indicator for preventive maintenance.
All wear surfaces are treated for improved corrosion resistance.
Directly interchangeable with competitive designs.
Seal under compression design can better handle pressure surges and promotes longer life.
* Series Super G :
1-1/4", 1-1/2" and 2" stationary siphons
Antimony seals and bearings are standard.
Two widely spaced bearings for stability, greater siphon support and longer wear.
Available in quick release flange assembly or threaded sleeve.
External seal wear indicator for preventive maintenance.
All wear surfaces are treated for improved corrosion resistance.
Directly interchangeable with competitive designs.
Seal under compression design can better handle pressure surges and promotes longer life.
* Type "C" Group Rotary Joints :
Type C joints cover a wide range of applications.
Type C and CS, CR and CRF, CF and CSF and Series 300 all have models designed for steam applications.
Works in duo-flow or single flow configurations.
Joint sizes from 1/2" to 3" available.
Rotating and stationary siphon joints for condensate evacuation.
Flanged and threaded ends available. |
|
| DSTI provides custom rotary unions for use in a number of semiconductor equipment designs. Our engineering staff can design a compact, clean room compatible rotary union to transfer many medias commonly used in the semiconductor industry. Please contact DSTI to discuss the specifics of your application. |
|
The multiple passage rotary union that is shown was designed and manufactured for wafer processing equipment. This union was designed to pass multiple medias without cross contamination between passages.
This rotary union is made from stainless steel and was designed to pass air, vacuum and wafer processing slurry. This is only one example of a union that we have designed for the Semi-conductor industry. We currently have several large OEM's that we provide custom unions for in this industry.
If you have a custom rotary union application, please contact our Technical Sales department at 1-800-959-0146.
|
|
Series 7100
Brass housing
N-model Carbon graphite to tungsten carbide seal
D-model Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium: water, heat transfer oil, steam
Available sizes: 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM |
|
* EUCARIGID-RAHT :
Pipes and fittings made of C.PVC for hot domestic water until 95°C
with BENOR quality label (following NBN EN 1566-1).
* EUCARIGID-RA :
Pipes and fittings made of PVC for cold domestic water (until 65°) following manufacturers standard or with BENOR quality label (NBN EN 1329). |
|
Style 194 Service Saddle
For use on PVC Pipe (IPS, OD)
Offers 360-degree support for taps off plastic mains
Designed with plastic pipe in mind, the Style 194 service saddle provides a low cost efficient means for supporting the pipe where service taps are made.
Check these advantages:
- Simply "wraps" around the pipe. One bolt to tighten.
- Full 360-degree support of the pipe, with designed-in safeguard against overtightening. Cannot deform the pipe.
- Recessed rubber compound gasket is confined, cannot blow-out, or cold-flow to weaken the seal.
- Boss furnished with either corporation or IPT threads, to suit your standards. 3/4" and 1" tap sizes available.
- Rugged malleable iron bodies are galvanized for long service life. Bolt is corrosion-resistant Dresserloy, cadmium plated. |
|
| DSTI can provide custom rotary unions designed to mount directly to an existing shaft. These units can be used to feed air, grease & other medias into rotating shafts. Please consult your DSTI representitive to discuss the details of your specific application. |
|
Rotary Systems designs and manufactures a line of standard and custom over-the-shaft rotary unions.
The rotary union shown is constructed from carbon steel and utilizes a precision ground shaft, radial ball bearings and Teflon seals. This is a two passage rotary union with .25" NPT passages with a four inch bore through the shaft. This union was designed specifically for a high pressure hydraulic indexing application.
Our standard over-the-shaft line of rotary unions can be viewed on our website by clicking on the 011 series. Our standard unions are offered in two and four passages with a .5", 1.5” or 2.0” bore through the shaft. The bore through the shaft is independent from the union. Some customers will pass a shaft or electrical wires through this bore.
If you have a custom rotary union application, please contact our Technical Sales department at 1-800-959-0146.
|
|
1⁄8" to 1⁄2" Air-Hydraulic Unions
- monoflow design
- self-supported rotating union
- radial housing connection
- balanced mechanical seal
- seal combinations:
Carbon Graphite/Hardened Tool Steel or
Carbon Graphite/Silicon Carbide
- felt oiler in seal cavity for air service
- oiler for relubrication (3 - 5 drops/month)
- low torque
- weight-optimized design
- aluminum housing
- bearings lubricated for life
3⁄4" to 11⁄2" Air-Hydraulic Unions
- monoflow design
- self-supported rotating union
- radial housing connection
- balanced mechanical seal
- seal combinations:
Carbon Graphite/Hardened Tool Steel or
Carbon Graphite/Ceramic
- felt oiler in seal cavity for air service
- oiler for relubrication (3 - 5 drops/month)
- low torque
- aluminum housing
- stainless steel or steel rotor (respective of model)
Deu-Plex Hydraulic Unions
- duoflow design
- self-supported rotating union
- flanged rotor
- balanced mechanical seals
- seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- full-media flow
- aluminum housing
- cast iron rotor |
|
Features
8 different, continuously improved sealing systems
Large number of product varieties available
Customer specific designs, even for high-demanding uses
Combinations of various mediums and electrical currents
The most modern materials and manufacturing processes guarantee the highest quality
Products
In almost all branches of industry rotary unions are needed for transmitting mediums between stationary and rotating machinery parts, whereby every application has different requirements. We have developed an extensive selection of various sealing systems, in order to meet these different requirements, and to be able to offer an optimal solution. We have a large range of products available, and as well customer specific designs.
|
|
Unions in stainless steel
BENE INOX offers you a complete range of stainless steel unions and fittings
"Industry" Range
(ISO, Metric, ANSI...)
Unions with conical seat or unions with flat seat (BSP or NPT)
3000 Lbs unions (NPT)
Hydraulic coupling
Cam coupling (MIL-C27487 / DIN2628 standard)
Symetrical coupling (NFE29-572 standard)
Express coupling (NFE29-573 standard)
Welding unions, or male/male, male/female, SW/male, growed...
SW, BW or threaded fittings (coupling, nipple, cap, bend, tee, reducer, flange, collar...)
Threaded stirrup, clamp and pipe holders
...
"food & dairy" Range
(SMS, DIN, Tri-clamp, Macon)
Unions for welding, unions for expanding, unions for hose fitting
male part, liner, nut, blind nut, with EPDM/FKM/Viton/PTFE gasket...
SMS/BSP adaptor, DIN/BSP adaptor
Bends (elbows at 90°, at 45°, at 180°)
Tees, reduced tees
Concentric reducers, excentric reducers
Clamps, pipe holders, stainless steel pipes
... |
|
FG Inox offers 3 standards of stainless steel of food fittings : SMS, DIN, MACON. Among this standards, FG Inox offers threaded fittings, welding fittings, valves and pipes.
All these products are made for alimentary using. |
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends |
|
Flanges in stainless steel
BENE INOX offers you a complete range of flanges
according to NF EN1092-1 standard (NP10/16/25/40), DIN2642 standard, ANSI B16.9, ASTM (150Lbs)....
for ISO, Metric, DIN piping....
for all industries (chemistry, petrochemistry, oil, dairy & food...)
S.S.304L and 316L range, up to nominal diameter 500
- plain welding flange
- lapped flange
- pressed lapped flange
- plain threaded flange
- blind flange
- welding neck flange
- "slip on", "lap joint", "welding neck"...
and :
Galvanized steel , up to ND300
- pressed lapped flange
Aluminium AS13 range, up to ND700
- lapped flange (ISO or Metric) |
|
| 304 and 316 stainless steel lapped flanges, threaded flanges, plain welding flanges, blind flanges, welding neck flanges. |
|
| FG Inox offers a wide range of clamp unions, pipe accessories and valves for food applications from 12mm to 104mm. |
|
Flanges
American standard ASME/ANSI
- Welding neck 150 lbs.
- Welding neck 300lbs
- Welding neck 600 lbs
- Slip-on 150 lbs
- Slip-on 300 lbs
- Blind Flanges150 lbs
- Blind Flanges300lbs.
ASME/ANSI European standard DIN
- Welding Neck DIN 2632 PN 10
- Welding Neck DIN 2633 PN16
- Welding Neck DIN 2635 PN40
- Plane flanges DIN 2576 PN10
- Blind FlangesDIN 2527 PN 10
- Blind FlangesDIN 2527 PN 16
- Blind FlangesDIN 2527 PN 40
Europeanstandard (cont..) DIN
- Threaded Flanges
- DIN 2566 PN 16
- Loose Flanges Aluminum
- Loose Flanges, hot galvanised
- Loose Flanges, stainless
- Pressede Loose Flanges, stainless
- Pressede Loose Flanges, zinc plated
- Sandvik Coupling L |
|
| Stainless steel 3000 lbs welding fittings and threaded fittings. Unions, elbows, tees, reducers, nipples, taps. |
|
| Easy to install and resisting to 20 bars of pressure, stainless steel press fitting offers a wide range of use for an excellent installation security and efficiency… Shipbuilding, compressed air, building, industry… |
|
Stainless Steel Unions
- monoflow and duoflow (available) design
- self-supported rotating union
- radial or axial (available) housing connection
- seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- wetted parts made of 316 stainless steel
- suitable for the food, chemical & pharmaceutical industries
- full-media flow |
|
Stainless steel construction
N-Modell Carbon graphite to tungsten carbide seal
D-Modell Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium water, heat transfer oil, steam
Available sizes 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM |
|
|
|
Couplings, Sleeves
