|
|
| Products 211 to 240 of 341 |
ADVANTAGES Flat faces can easily be wiped clean before
connection to prevent the ingress of contaminants
into the circuit. Clean disconnection - non-spill design. No air intrusion during connection. Streamlined flow path minimises pressure drop. Locking sleeve prevents accidental disconnection.
Bi-directional flow.
Suitable for use at depths of 1000 m when connected.
Made to ISO 16028 connection sizes.
|
|
Stainless Steel Unions
- monoflow and duoflow (available) design
- self-supported rotating union
- radial or axial (available) housing connection
- seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- wetted parts made of 316 stainless steel
- suitable for the food, chemical & pharmaceutical industries
- full-media flow
|
|
Stainless steel construction
N-Modell Carbon graphite to tungsten carbide seal
D-Modell Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium water, heat transfer oil, steam
Available sizes 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM
|
|
The rotary union pictured was designed to pass pneumatics and/or DI water for a Chemical Mechanical Planarization (CMP) piece of Semi-conductor equipment. The union is manufactured from 316 stainless steel and the shaft is hard chromed on the seal surface for hardness. We currently provide a number of multiple passage rotary unions to the Semi-conductor industry in the CMP field.
Please contact our Technical Sales Staff for your specific requirement.
|
|
316 stainless steel symetrical and express quick couplings to weld, threaded or with hose shank.
316 stainless steel threaded cam lock couplings or hose shanked cam lock couplings type A, B, C, D, E, F, dust caps and dust plugs.
|
|
Bend and Fitting
Hot Induction Bend: ø 114mm - ø 1626mm (4"-64")
Radius of Curvature: Above 3D subject to O.D. and W.T. of the Bend
Degree: 0°- 180°
Quality Standards: SY/P5257-2004 and requested technical standards
Grades: GB/T9711 L190-L555 (API 5L A-X80)
PLEASE WRITE ALL ENQUIRIES IN ENGLISH ONLY! THANKS!
|
|
Properties:
Design ==> Fitting
Construction ==> Cross shaped
Connection 1-4 ==> metric cylindrical outer thread
Seal type ==> 24° inner cone
Standard ==> DIN 2353
Delivery form ==> Socket (without union nut and cutting ring)
Material ==> Steel
Surface protection ==> electro galvanised, yellow chromized
|
|
|
Tompkins Steel Adapters (Forged and Straight) are made from carbon steel. These high-quality, one-piece adapters are finished in five color zinc dichromate and value priced. Perfect for applications with working pressures up to 10,000 psi and temperature ranges of -65 degrees F to +250 degrees F. Widest availability of jump-sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
Ultra Thin-wall Flexible Metal Roll is extremely thin at only 0.03 mm. It is soft and flexible, yet rigid with high tensile strength of stainless steel. This roll shows the best performance when used in a fuser unit of a printer or copier, realizing wall contact and shorter standing-up time.
Features
Ć Thickness: 30 micron minimum
Ć Seamless
Ć Create wall contact rather than line contact, resulting in effective nipping
Ć Excellent thermal conductivity resulting in shorter stand-up time and conservation of electricity
Ć High tensile strength of stainless steel
Ć Smooth surface
Ć High precision in thickness, roundness, outer and inner diameter
Ć Light
Ć Plating, plastic coating, and rubber coating on surface
Ć Choice of magnetism and nonmagnetism
Application
Ć Fusing unit in a printer or copier
Ć Other parts in a printer or copier
Ć Motor cover, Rotor cover, Stator cover
Ć Plastic Sheet forming, Film forming
Ć Lamination
Ć Seamless Bellows
|
|
SMC Series Subminiature Couplings
The SMC Subminiature Coupling is Colder Products’ smallest coupling. This twist-to-connect coupling provides a reliable and more secure alterative to luer-type connections. The SMC also allows the tubing to rotate freely when connected, which prevents both kinked tubing and accidental disconnection during use.
|
|
|
The Swivel Fittings are ideal for a broad range of medical, industrial, laboratory and instrumentation applications involving pneumatic systems. Swivel Fittings are available with 10-32 UNF, 1/8-27 NPT, or 1/4-18 NPT threads. Three models are available, Straight Swivel, Swivel Elbow and Swivel Tee. The unique design (Patent # 4,496,204) allows the fitting to swivel 360 degrees. The snap type fitting is sealed with a Buna-N, Viton, Silicone, or EPDM o’ring. All models are available with barbs for 1/16”, 3/32” or 1/8” I.D. flexible tubing. The absence of a molded parting line on the first barb guarantees a leak free seal.
|
|
BALL-SWIVEL PLUG
- The plug swivels for greater manoeuverability!
- Offers a 53° conical range of motion for greater operator comfort
- Allows an airflow of up to 2,095 LPM (74 SCFM)
- Maximum Air Pressure: 6.2 Bar (90 PSIG)
|
|
|
|
|
|
Connections which give all freedoms of movement, with safety and reliability....
Revolving articulations GANYMED are used for the transport of all types of fluids or gas between a fixed point and a mobile point. By their capacity of rotation, the facility of installation, reliability and the lifespan, these articulations revolving GANYMED are a relevant solution for many applications,
The main features are:
- Rotation: until speeds of 10 turns per minute.
- Diameter of passage: DNN 20 with DNN 700.
- Pressure: vacuum with 700 bar
- Temperature of the fluid: of -50°C with + 225°C
- Sealing: by PTFE joint,
- Construction: with ball bearings integrated
- Connection: male threading, threading female, supports, connection for welding...
- Material of manufacture: Steel (42CrMo4) or stainless steel (1.4571).
Products very neat, manufactured in Germany, available on stock, prices very competitive.
Applications: Chemical process, loading arm, treatment of water, agro-alimentary and pharmaceutical process, energy....
MCPI is the sole distributer in the French-speaking countries of the company HAAG + ZEISSLER
Contact: mcpimail@mcpi.fr
|
|
|
Rotary Systems' entry level 90 degree swivel is designed for the hose reel industry. This economical swivel uses a hardened and ground shaft and impregnated Teflon seals. The 001 series is able to withstand high pressures, moderate speeds and low side loads.
|
|
STENFLEX swivel joints are used in applications involving liquid and gaseous media. The swivel joints can be used as flexible pipe connectors under the most demanding conditions and can withstand extreme temperature and pressure.
STENFLEX swivel joints are highly suitable for absorbing oscillations. Swivel motion can be handled as well as complete rotation at low speed.
|
|
Developed originally as part of the TODO-MATIC® coupling construction then subsequently as a stand alone product, the TODO® swivel has proved itself in the toughest applications for over 20 years.
Used mainly to allow free hose movement without imparting torque stresses to the assembly (one of the biggest causes of premature hose failure).
# Simple design, low maintenance
# Very compact
# High flow rate / low pressure drop
# Full range of sizes, materials and connections
# Stainless steel bearings and single 'O' ring seal for realibility
|
|
Technical Description
Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. Depending on design, the body is made of brass (TDG) or steel (TKR) and the rotating axis of surface-purified/stainless steel.
Maximum rotation speed: 60 r.p.m.
Advantages
Rotating joints minimise the high wear to the hose, which occurs in hydraulic systems. Solid construction with two plain bearings (TDG) or ball/roller bearings (TKR). Suitable for combining with norm hydraulic components.
Working Temperature*
-20°C up to +100°C (NBR)
depending on the medium.
FKM on request.
|
|
Ganymed-Swivel Joints
Applications: Articulated tongs, Loading stations (chemical, petrochemical industry, etc.) waste water purification techique (ventilation systems, rotating scraper bridges, sludge cleaning, etc.)
Connections: Threads, welding, flanges, cutting rings
Materials: Steel (42CrMo4), Stainless steel (1.4571)
Sealing: PTFE compound
Operating conditions: max. pressure 420 bar, max. temperature 225 °C, min. temperature -50 °C (*, 360° swivelling movements, rotating movements also suitable for low speed
|
|
Any semi-rigid gas pump hose can be made flexible and easy-to-handle with DynaVariacor® - the patented multi-directional connector.
It reduces efforts, increases nozzle manoeuvrability.
Prevents unwanted twisting of the hose.
Easy filling whatever the position of the gas tank cover or type of vehicle.
Easy nozzle removal from the vehicle.
This connector Improves uniform wear of the hose thanks to less twisting.
Best flow whatever position the connector is in.
|
|
Tapered seal connection:
- Adjustable fittings with taper and O-Ring
- Direction adjustable with the rotatable coupling nut
- With the additional O-ring in the cone, a metal/ elastomer seal is created that guarantees leak-tightness
- Compatible with all threaded connectors according to DIN 3858 with 24° -inner cones
- Pressure ranges from 315 to 630 bar
- All fittings made of stainless steel AISI 316Ti
|
|
sf 274 und sf 277
Adjustable Male Stud
Standpipe
Operation
The nut on sf adjustable cone sealing couplings can be turned, due to the retaining pin which holds the nut in place. This pin sits in a groove between the nut and the coupling body. Sealing is by means of the O-Ring on the 24° cone and conforms to DIN 3865.
Advantages
positionable as the nut can be turned on the stud
can be assembled onto compression studs and onto studs to DIN 3853
minimal cross-section variation
easier and quicker assembly because of minimum movement exerting little torque
highly leakproof due to O-Ring seal
highly resistant to pressure surges and vibrations in the system
high strip-off safety degree due to form-fit construction
|
|
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
sf-Test Points, M16x2
Specially designed as a measuring point in a system; for measurement, control and service as well as venting valve and for taking test samples.
|
|
Thermoplastic Couplings offer push-to-connect operation, light weight design, and excellent chemical compatibility to meet a broad range of applications.
PF Series are non-spill couplings designed for use in closed system transfer and dispensing of chemicals with minimal environmental contamination. Available in body sizes 1/2" through 2".
PPM and PPL Series are general purpose, thermoplastic couplings with push button operation. Available in body sizes 1/8" and 1/4".
Spectrum Series couplings are available valved or un-valved and in an optional panel-mount configuration. Available in body sizes 1/8" and 3/8".
|
|
BULK precision pipe fittings are manufactured in a wide range of configurations
Size range from 1/8” to 1”
Construction from bar stock or forging materials
Threads meet requirements of ANSI B1.20.1, DIN 2999, BSP and ISO 7/1
Male and female threads are protected to ensure their integrity
|
|
|
|
Couplings, Sleeves
