|
|
18.1 PU screwed cuff EL
for Master-PUR hoses, electrically conductive≤ 104 Ohm
18.2 Combiflex PU cuff
PU soft cuff for Master-PUR hoses
18.3 Combiflex PU cuff V
PU soft cuff for Master-PUR hoses on steel pipes acc. to DIN 2448/DIN 2458
18.3.1 Combiflex PU cuff V-EL
PU soft cuff for Master-PUR hoses, electrically conductive ≤ 104Ohm
|
|
QUICK-RELEASE COUPLINGS RPL for cold, chilled or hot water circuits.
Mould temperature control connections on thermoplastic, Zamak or aluminium injection moulds.
* Identification of your circuits: even quicker and precise
Your hot or cold circuits are quickly and easily identified by red or blue collars installed onto straight or extended sockets and onto plugs.
* Even more safety: visual validation of the connected position
You control the locked position by visualizing the red, blue or black collar onto the plug.
* Even more reliability thanks to the reinforced locking mechanism.
* Even easier connection and disconnection: the RPL range is quick to operate, reliable and designed for one handed operation. The knurled locking sleeve ensures easy plug handling. When installed in a confined area, a shape (Ø 8 and 12 mm) or a groove (Ø 6 mm) on the locking sleeve, facilitates the disconnection via a tool, in complete safety.
* Marking on both socket and plug.
Increased tightness as a result of a rational design and end-face environmental technology.Increased performance, with an optimum flow-rate for maximum compactness.Easier to handle, with solutions designed for difficult access and blind connections.Our regulation and cooling solutions have all the qualities plus one more; a resistance adapted to all types of mechanical applications to ensure reliability across the board.
|
|
Couplers water, system 1/2 ", 3/4 ", 1 "
Automatic connections high pressure (180 bar/150 °C)
Couplers of safety warm water (remains engaged under the effect of the pressure)
Stainless steel couplers
|
|
|
Connections, Flexible devices, Valves, Clamps for: Watering, Compressed air, Welding, Irrigation, Fire, Hydraulics
|
|
|
Nor-Cal's ASA flanges are manufactured from specially treated 304 stainless steel. These flanges mate with standard 150 lb. ASA flanges or 150 ANSI flanges. They are available from stock for standard tube sizes from two to 12 inches. Larger sizes are available upon request. Nuts and bolts are used to apply pressure between the mating flanges and a seal is effected when a Viton-A® O-ring is compressed. ASA flanges can be baked to 204°C and have a vacuum range of up to 10-8 Torr. Besides being sold separately, they are available as standards on nipples, adapters, tees, crosses, traps, elbows and valves.
|
|
|
Deublin custom rotary unions can be designed and manufactured to suit a wide variety of custom applications. To date, Deublin has designed and supplied 300 mm water and air union and for pressures upto up to 700 bars. Whatever your application might be, Deublin has a solution!
|
|
The 3 passage rotary union pictured is designed for a large crane application. The union is designed with high pressure seals and large bearings for the rugged environment that the union is exposed too. The large flange is welded onto the housing for mounting purposes. A very large slip ring is mounted on the back of the union for electrical power. The union is painted to protect it from the environment.
If you have a custom rotary union application, please contact our Technical Sales department at 1-800-959-0146.
|
|
|
Deublin custom rotary unions can be manufactured to meet any specific custom application. Please provide detailed application information by clicking the link ... we will either modify an existing design or design one to meet the exacting needs of your custom application.
|
|
Filton undertake to design and manufacture rotary unions to meet customers specific requirements and have had many years experience in producing Multi-Port Unions.
These can be made in a range of materials including aluminium, bronze, carbon steel, stainless steel and nickel alloys.
|
|
|
Filton swivel joints are available from 1/4" to 2" BSP with a single or double flow facility for a pressure range of 740mm of mercury vacuum to 400 bar. Sealing is created by using elastomeric 'O' ring seals in the low duty models and PTFE seals in the heavy duty models.
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’
|
|
Top Line BioPharm products are designed and built to meet the most stringent requirements of ultra-pure processing, including the ASME BPE 2002 specifications for dimension, surface finish and tolerance.
- Type 316L stainless steel
- Clamp or weld end connections
- Pin stamping of heat numbers and stainless steel grades
- High quality electropolishing or other finishes to suit your needs
Every Biopharm product is subjected to rigorous quality control inspections, then capped and shrink-wrapped to ensure safe storage and shipping.
|
|
Different types :
washer holder
semi-quick
coupling and rotating
Can fit pipe sizes of Ø int. minimum 4 mm maximum 50 mm
|
|
HTC has developed a special expertise in designing and manufacturing standard vacuum flange and custom assemblies for vacuum components.
-- Blank : 304 S.S. (Other material available upon request)
-- Flanges : 304 S.S. (Other material available upon request)
-- Fittings : 304 S.S. (Other material available upon request)
-- Clamp : Aluminum
-- O'ring meterial : Viton® or NBR
-- Temperature Range : 150oC ( Viton ) 80oC ( NBR)
-- Vacuum Rate : 10-8 torr
Larger or special size available upon request
|
|
Pfeiffer Vacuum's product portfolio is rounded out by a broad selection of components, feedthroughs and lubricants. Standard valves in numerous designs, e. g. manually, electropneumatically, or electromagnetically operated.
ISO-KF:
• Small flange components made of aluminum or special steel
ISO-K/F:
• Clamping flange components
CF:
• UHV components
|
|
Features:
- Unique interlocking wedge design: no first step bending and risk of slipping out of joint.
- Corrects twist and rotational misalignment without additional stress in pipelines.
- Integrated wedge concept: friction-free, smooth, parallel wedge movement eliminates flange damage and spreading arm failure.
|
|
HYDRAULIC FLANGE SPREADERS
Capacity 2 Tons to 14 Tons, Integrated wedge concept, friction-free, smooth and parallel movement eliminates flang damage and rist of spreading arm failure. Unique interlocking wedge design-no first step bending and risk slipping out of joint, Few moving parts means durability and low maintenance, Ideal tools for confined spaces, Adjustable jaw width from 70mm to 216mm for a wide range of application.
|
|
The World's Most Multi-Purpose Hydraulic Flange Spreader
Available in both Hydraulic and Manual versions, the TFS Series Flange Spreader can give you over 10,000 lbs of spreading force. This tool features parallel opening jaws with out drift. It stays where you set it. With a full operation spread of 3", this tool is a must when dealing with flanges.
|
|
The flexible cuffs QuickFlex are used without the processes for powders or granulated. They allow d%u2019isoler mechanically equipment the ones compared to the others. Ex: to isolate a vibrating sifter compared to his screw from proportioning.
QuickFlex consist of:
- 2 rigid pipes to weld onto the 2 parts of the process having to receive the cuff. These pipes are equipped with patented sections, adapted to the QuickFlex cuff.
- 1 flexible pipe whose two ends are equipped with bands d%u2019acier with spring moulded in l%u2019élastomère of the cuff. The installation of the cuff is done in a very simple way, by deforming the band d%u2019acier with spring in order to l%u2019insérer in the rigid pipes. The original shape of the section ensures then a perfect sealing of the cuff.
The assembly is done without tool in less than 20 seconds. One thus eliminates the risks to be wounded with screwdrivers during tightening from the traditional collars. Moreover the sleeve is adapted perfectly to the pipe.
No zone of retention n%u2019exist enters the flexible cuff and the pipe.
The system is tight with the emissions of dust. It resists an explosion of dust.
From its design, the phenomena of shearing of the cuff by the collar are eliminated.
Various d%u2019élastomères qualities are available:
Let us quote in example a food translucent polyurethane execution allowing to control l%u2019interior of the process visually.
For l%u2019industrie mineral, flexible cuffs in Kevlar are available.
These cuffs are available in a diameter ranging between 100 and 650 Misters.
|
|
The core of the Larox pinch valve is the elastic sleeve, which is the only part in contact with the medium. The full bore sleeve integrates the valve to the pipeline. This full bore design eliminates turbulence and minimizes pressure losses. Technologically advanced Larox sleeves guarantee high wear and corrosion resistance, a trouble free operation, and extended lifetime. Our sleeves are 100% tight. Larox sleeves are handmade layer by layer in a quality process covered by ISO 9001:2000. The standard sleeve design consists of three sets of layers: the inner layer, the reinforcement layer and the outer layer. The inner layer, which is the only part in contact with the medium, is resistant to wear and chemicals.
The reinforcement layer gives the sleeve its pressure retaining capability. The operating pressure of the sleeve determines the reinforcement fabric to be used in this layer.
The outer layer protects the sleeve from the external process environment.
All standard Larox sleeves are equipped with opening tags to ensure full valve opening in all conditions. Pinch valves are often applied in aggressive, abrasive and corrosive media types, or in high-pressure applications. To cover a wider range of applications, our R&D has developed several sleeve materials and constructions to meet these industry specific needs. The high-grade Larox sleeve materials range from wear resistant styrene butadiene to numerous other elastomers and rubber compounds. These materials are highly resistant to abrasive and corrosive slurries, powders and granular substances. By introducing a HNBR, hydrogenated nitrile sleeve material, Larox sleeves can now handle temperatures up to 160°C.
|
|
The Variacor® system, internationally patented, makes all rigid hosing flexible and multi-directional, whatever may be the pressure.
-Increases pliability of fire hose, less effort due to hose rigidity,
-Makes easier using fire hose in hard to access area,
-Reduces step backwards when handling fire hose.
|
|
Autoclave's medium pressure and high pressure series use the coned-and-threaded connection. This metal to metal connection features orifice sizes to match the high flow characteristics of this series. Autoclave's fittings and tubing are used as fluid handling components for the chemical/petrochemical, research, and oil and gas industries and have different ranges capable of operating to 150,000 psi (10,000 bar) and range in size from 1/4" to 1" tube size.
|
|
Fittings with bush EO2 + machines EOMAT ECO/UNI
Description:
Fitting with bush high pressure guaranteed without escapes and simple and reliable machines of assembly
Advantages:
*Raccord with bush EO2:
- with seal elastomer for a total absence of escapes
- very simplified assembly (loss of the impossible bush, mechanical stop unit)
- unlimited assemblies, disassemblings (possibility of changing the seal)
- high resistor with corrosion (500H with white rust
*Machines of assembly EOKARRYMAT and EOMAT ECO/UNI
- simple and reliable
- portable and autonomous (EOKARRYMAT)
- tubes of 6 with stainless and steel 42mm
- economic (2 X faster than a manual assembly) "
Applications:
Fittings with bush EO2 associated with the machines with assembly EOKARRYMAT and EOMAT ECO/UNI are used successfully in a multitude of industries where fluids are conveyed under pressure
|
|
Parker Instrumentation has launched a range of 10,000PSI-rated (689bar) instrument pipe fittings. The range provides instrumentation and piping engineers with quality components for interconnecting instrument-grade piping in the growing number of high pressure applications, such as those found in deep water oil and gas exploration and production.
Parker's High Pressure Instrument Pipe Fittings are available in numerous forms including straight, elbow, tee and cross shapes, and support male and female NPT (National Pipe Taper) thread sizes from 1/8 up to 1 inch. The fittings are fabricated from 316L grade stainless steel as standard, with other materials available as options.
To support quality procedures, HCT (heat code traceability) identification codes are provided as standard. Parker will also provide NACE compliance information for the components, on request.
In total, 13 styles of fittings are available, providing an efficient single-piece solution for virtually every common connection requirement: male hex nipple couplings in standard and long sizes, male and female elbows and tees, street elbow, female cross, pipe cap, hex headed plug, female hex coupling, male-to-female adapter, and male-to-female reduced bushing.
|
|
- Working pressures up to 14.000 bar / 200,000 psi.
- Large orifices at rated pressures.
- Excelent flow capacity performance.
- Safety quaranteed by use of wheep holes.
- High quality stainless steel.
- Suitable for fluids and gases.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
- Working pressures up to 4.200 bar / 60,000 psi.
- Large orifices at rated pressures.
- Closed types with integrated check valves or open types.
- Excelent flow capacity performance.
- High quality stainless steel.
- Suitable for fluids and gases.
- Direct- and in line mounting
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
|
Couplings, Sleeves
