|
|
| Products 91 to 120 of 264 |
Style 360 Repair Clamp
The Dresser® Style 360® repair clamp offers simplicity and ease of installation. Just wrap the clamp around the pipe, drop the bolts in place and tighten. It's that simple! Moreover, special one-inch long nuts allow the use of a standard deep socket wrench for complete tightening. In the popular 7.5 inch clamp width, there is also a third nut so
the middle nut can be used to pre-tighten the clamp.
Additionally, the smaller sized clamps feature a flexible band which means less holding force is required while tightening.
With the "360" clamp you can repair holes, breaks and splits in the pipeline. You can use it where pipe ends are separated, or where ends are deflected up to 4 degrees or 1/8 inch. Or you can join two pipes with a variation of 1/4 inch outside diameter.
Clamp features include a tapered gasket with a gridded design and the spanner is molded flush with the gasket to prevent "hang up." The "360" has a stainless band, lugs of rugged ductile iron and bolts of corrosion-resistant Dresserloy.
|
|
As demonstrated by our product certifications (AENOR, AFNOR, Kiwa, etc.), Cepex offers the highest-level guarantee for all its PVC Fittings for pressurized fluid handling applications. The extensive range of sizes and combinations we offer will accommodate any system design. The dimensions of our fittings comply with UNE-EN 1452-3, UNE-EN 1452-3, DIN 8063, and NF 54016/54029 standards, while many of our products meet other standards as well, including British, ASTM and Thai.
|
|
The U-PVC range is a system of products complete of: fittings for solvent welding, threaded connection and manual or automatic valves for use in the construction of process and service lines to convey industrial fluids at maximum operating temperatures of 60°C.
The entire range is produced using U-PVC resins compliant with the standards EN 1452 and ISO 4422 and in observance of the requirements of DIN 8063 and EN ISO 15493 for the use of plastic pipes in industrial processes.
Among the main properties and features of the U-PVC range the following can be noted:
Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with regard to most acids and alkalis, aliphatic hydrocarbons and saline solutions. U-PVC resins are also totally compatible for handling food grade fluids, treated and untreated drinking water, as well as demineralised water according to current national and international standards.
Good thermal stability: Mostly in the intermediate temperature range between 20°C and 50°C, U-PVC finds its ideal application in industrial and water supplies, guaranteeing optimal performance in terms of mechanical resistance, good rigidity, low coefficients of thermal expansion and optimal safety factors in service.
Lifetime: U-PVC resins feature is an high value in the material strength (Minimum Required Strength MRS ≥ 25.0 Mpa at 20°C) and an extremely extended lifetime.
|
|
Mechanical Fittings
Fittings for Solvent Cementing
Fuseable Fittings
COOL-FIT
Double Containment
Multilayer Fittings
|
|
We have a very large range of barbed tees and "Y" fittings along with check valves and luer fittings,ask for our extensive catalogue
|
|
Fittings(Synapse)
Flare Type (Ferrule Type)
With flare type, a ferrule called a "Seal Joint" is attached for easy connection. The Seal Joint is a component molded in a flange shape. Simply insert the Seal Joint into the end of the tube for use.
Flange Type
A flange type is used for tubing made of plastic like PTFE, and has a simple structure.
Before use, the tube end should be enlarged like a trumpet and pressed into the bottom of a valve port.
Male Connectors & Male Elbows
PT Male Connector
PT Male Elbow
LPT Male Connector
LPT Male Elbow
|
|
Cepex offers two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131. These fittings allow for a quick, simple insertion of the tube, considerably reducing installation time: simply loosen the nut (without removing it), and insert the pipe.
|
|
A rotating union must be capable of containing high pressures while
rotating at very high speeds.Smooth,easy rotation can only be
achieved by exactly mating the seal faces to minimize friction.
Precision and tight tolerances are critical in the micro lapping of sea
faces.All Deublin seals are micro lapped to an optical flatness within
2 light bands or 0.000023”utilizing proprietary lapping machinery
and compounds.This level of precision is essential for dependable
leak-proof operation.
Housings are machined on multi-axis twin-spindle lathes to obtain the
necessary part-to-part precision.Rotors and other parts are turned
on automatic bar machines to ensure true-running rotating unions
without any wobble.This assures extended service life.
|
|
Rotating union for high pressure and high speed.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : Until 3560 PSI
Speed : Until 2500 RPM (according to dimension)
Number of flows : 1
Installation : Axial inlet or radial inlet (90°)
Dimension : 1/4" to 1"
Type of seal : Composite seal
Materials : Nickel plated steel or stainless steel 316L
Temperature : Standard 80°C (other on request)
Rotation : Single ball bearing
|
|
This technology allows easy and instant connection by hand, without the use of tools.
- time saving and simplicity of installation.
- full flow (no restriction to passage) as gripping and sealing are achieved using the outside of the tube.
- automatic sealing by means of the O-ring seal and the optimised design of the tube.
- compactness of installation: no access required for a tightening tool.
|
|
Description: 10-32 thread stainless steel push-connect fittings for 1/4" OD tube.
Material: 303 Stainless Steel
Seals: Two Buna-N O-rings
|
|
The new BreakAway coupling from Colder Products Company provides safe and easy fluid transfer and protection from costly product loss and equipment damage. While heavy duty industrial versions of break-away couplings exist, there have been few options available for low pressure applications in plastic materials. These high quality, leak-free connectors allow the user to break the connection without depressing a latching mechanism for rapid, automatic disconnection when needed.
There is an increasing use of personal cooling systems across numerous markets. In some applications like automotive racing, a break-away coupling is mandatory. In other applications, it is an added convenience such as cooling vests for police officers, athletes or soldiers who may need to move quickly, and can't be tethered to a cooling device.
Colder's BreakAway couplings are available in acetal with Buna-N o-rings, 316 stainless steel valve springs, and automatic shutoff capabilities. Available in in-line and panel mount styles with 1/4" and 3/8" hose barb terminations, the coupling's maximum pressure rating is 20 psi (1.4 bar) and the temperature range is 0°F to 150°F (-18°C to 66°C).
# # #
CPC, Colder Products and Colder Products Company are registered trademarks
with the U.S. Patent & Trademark office.
|
|
Dry Break Couplings
Todo-Matic Dry Break couplings offer industry leading valve technology for the safe transfer of hazardous chemicals. Todo-Matic couplings are operator friendly and can be engaged with a simple rotation without external locks, levers, buttons or cam ears. Coupling design allows for on-site replacement of seals. They are equipped with an integral swivel to prevent hose fatigue and facilitate coupling orientation. Products are available in aluminum, brass, stainless steel and hasteloy, in diameters from 3/4" to 6".
|
|
The Innomatec connec ® Quick Connector System closes pipes, connecting pieces, tubes, drill holes, outer threads, inner threads and all types of cylindrical bodies, but it can also connect you to a desired circulation system. Oval, rough and cast surfaces along with high tolerances samples are radially sealed.
The innomatec connec ® Quick Connector System can be loaded with a sample manually or with an automatic tool. The Quick Connection is pneumatically activated with a pressurized air system. Sealing occurs with an elastic rubber washer. The system is filled or sealed through the tested connection. After the test is complete, the test connection is depressurized, the sealing ring relaxes, and the connection can be removed. Whether the connection must be armed with a sliding barrier depends on diameter, working pressure, and surface properties (oiled, etc.).
The innomatec connec ® Quick Connector System has an excellent degree of sealing (and is “helium-proof”). The standard lives of the sealing rubber washers are appropriated depending on routine aptitude. The change in the sealing rubber washers can be very easy and does not necessitate the use of tools.
There are a number of special inplementations for specific uses with motion limitation, sliding barriers, support hulls for specific environmental conditions. For specific utilizations, the connection measurements and individual parts can be adjusted to the task. We welcome any of your questions. Please use our checklist for this purpose.
|
|
Weatherhead has consistently delivered innovative solutions at every turn.
Quick-connecting Mini Barb® brass fittings require no tube preparation and are extremely compact for tight fits in tight areas.
|
|
|
These couplings are designed for all important low pressure applications as well as for pressures ranging up to 650 bar (on demand even more). They vary from applications in machining, hydraulic, off-shore, security technics, fire protection, mould construction, plant engineering, laboratory, Chemical industry, pharmaceutical industry, food industry, laboratory technics, medical engineering to clean room applications. All couplings according DIN ISO 7241.B are interchangeable amongst each other.
|
|
IdentiQuik Smart Couplings™ with RFID Technology
IdentiQuik Smart Couplings™ from Colder Products combine the power and control of RFID and wireless ID technologies with the reliability and ease-of-use of Colder’s quick disconnect couplings. Their breakthrough design enables users to freely exchange data between two halves of a coupling at the time of connection. With Colder’s IdentiQuik Couplings, companies can achieve a new level of automation, safety and quality in their critical processes.
In its current configuration, the insert portion of the IdentiQuik Coupling contains a radio frequency identification tag that is programmed with unique product data, such as stocking history, package size, date code, or product characteristics. Prior to connection, the body portion of the coupling reads the tag and communicates with a wide variety of devices such as computers and programmable logic controllers using standard data interfaces. Examples include: recalibrating operating parameters base on the manufacturing lot of the consumable; locking out expired product; or preventing re-use of a single-use item.
The benefits of Colder’s IdentiQuik Smart Couplings include:
•Identify misconnections
•Save time
•Prolong equipment life
•Brand protection
|
|
General Purpose 55 Series Unions
- monoflow and duoflow design
- self-supported rotating union
- radial housing connection
- balanced mechanical seal
- 3 vent holes
- forged brass housing
3
- stainless steel rotor (/8" - 1")
- special options:
threaded vent holes,
low torque design
|
|
Duff-Norton manufactures rotary unions, rotary joints, rotating joints and offers a line of 32 series ranging up to 10,000 psi and up to 5000 RPM. Rotary Union® is Duff-Norton%u2019s registered trademark for rotating joints.
Rotating joints are used to transfer fluids from a stationary supply to a rotating component, i.e., a drum or roll.
They are used in process industries like paper, printing, rubber and plastics, textile and chemical; on cranes, on machine tools and in a host of other applications. They are used to provide heating or cooling media like steam, hot oil, water or coolant to control the surface temperature of a drum or roll, to transfer air or hydraulic fluid to moving components or to add fluids to mixers while in motion.
Duff-Norton has traditionally served the markets where it supplies its general purpose joints, such as the rubber and plastics industries, and in the textile market it supplies its 8000T, a joint designed especially for the textile industry. The single largest user industry of rotating joints worldwide is the pulp and paper industry, which requires large quantities of joints for steam, water and hot oil. The steam applications (i.e., dryer cans) are most prevalent in paper mills.
|
|
Rotary Unions are self-contained and self-supporting rotary seals used to transfer fluids such as steam, water air or oil, to and from rotating machinery.
Standard units are of steel and iron construction with specials available in, for example, stainless steel and nickel alloys for chemically aggresive fluids or food quality applications.
|
|
A range of swivel joints muli channels with or without electrical commutator, with or without friction.
Many possible diameters of passage.
With of a standard range of products, we carry out products to measure adapted to your application.
Do not hesitate to consult us
|
|
MID has developed a new variable geometry coupling, which can swivel through 360 degrees: the DynaVariacor®. This internationally patented system provides in particular complete flexibility for use with all types of pneumatic tools and appliances.
The coupling is robust, light and compact; it reduces wear and avoids coiling of the feed hose. This coupling enables increased precision of movement of the tool by reducing the handling force required by the user, due to the relative rigidity of the feed pipes. Operator comfort is improved. The DynaVariacor® products have useful features: the interior cross-section of the coupling remains constant at all angles, so pressure loss is minimised and flow rates are naturally optimum.
The system is available in several sizes and fittings for a variety of uses: small industrial hand tools such as impact wrenches, grinders, drills, screw guns and riveting machines as well as equipment of larger size and power such as nail guns, staplers, disc sanders, pneumatic drills, compacting machines and special equipment.
|
|
Radial inlet swiveling rotating union for a flexible rotation and a balanced pressure.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : Until 4275 PSI (according to dimension)
Speed : Swiveling or very slow rotation speed
Number of flows : 1
Installation : Radial inlet (at 90°)
Dimension : 1/4" to 1"1/2
Type of seal : Composite seal
Materials : Nickel plated steel or stainless steel 316L
Temperature : Standard 80°C (other on request)
Rotation : Oilite bearings
|
|
Rotary Systems’ new line of “029” series work-holding unions are available in two, four and six passage models. These unions are designed with #4 SAE threads with both radial and axial feeds on the rotor shaft for a choice in mounting your fittings.
The union utilizes a hardened and ground shaft, impregnated Teflon seals and dual radial ball bearings to eliminate seal loading which results in longer life of the union.
These unions are designed for high pressure and moderate speed applications. They are ideal for rotating pallet changers and rotary indexing table applications. Multiple medias can be passed through the union without cross comtamination between passages.
See our 029 series to view each size.
|
|
The Barco Series E-75 RS Rotary Union incorporates state-of-the-art sealing technology for use on water applications in the printing, paper, rubber, plastics and steel processing industries.
Special Design Features :
- Dry Run Capability
- Silicon carbide to carbon graphite mechanical seals.
- For abrasive applications silicon carbide to siliconized graphite mechanical seals.
- Seals are user replaceable.
- Sizes from 3/8" to 3"
- Available in US or metric thread specifications.
|
|
|
|
Couplings, Sleeves
