|
|
|
SafeWay’s S51 Series is a minimum spill, thread-to-connect, fluid transfer quick coupling designed for use with most industrial fluids. It can be connected under full system pressure by rotating the female threaded heavy-duty ductile cast iron wing nut or brass hex nut onto the mating male threaded tip (nipple).
|
|
|
|
|
|
ST Series Fluid Couplings
This straight-through coupling series is designed for use where minimum pressure drop is required and valving is not needed. The manually operated design is ideal for use on pressure wash, steam cleaning and carpet cleaning equipment, as well as many fluid transfer systems. Featuring a ball lock design, the smooth bore permits free flow of gas or liquid. Both male and female NPTF, BSPP and hose stem connections are available. Additional options include sleeve lock, five seal options, dust caps and dust plugs.
Features
Ball lock
Manual operation
Smooth bore permits free flow of liquid or gas.
Male and female NPTF, BSPP and hose stem connections
Options
Sleeve Lock
Seals: Teflon (1-ST
through 8-ST), Neoprene, Viton, Buna-N and EPDM
Standard materials
Brass or 303 stainless steel socket construction
Stainless steel springs, balls and retaining rings
Brass, zinc plated steel and 303 stainless steel
plugs
High impulse heat treated 416 stainless steel plugs
available in 1/4" and 3/8" body sizes
Buna-N (Nitrile) seals
Accessories
Dust Caps and Dust Plugs for a limited number of sizes
|
|
|
|
|
|
Quick connect non-drip couplings designed solely for connecting low-pressure fluid and vacuum lines in which virtually zero spillage is critical.
CEJN non-drip couplings are adaptable to most applications and system requirements. The series includes two styles:
- Valved: One-hand operated; most commonly used style in fluid systems
- Valveless: Two hands needed for connection/disconnection; useful in coolant applications in which fluid loss at disconnection is not critical
Standard range includes three configurations: single shutoff, double shutoff, and straight through. The series is compatible with working pressures up to 290 PSI (20 bar) and temperatures up to 600° F (315° C) and is available in ¼-inch through 1-inch sizes. Constructions include nickel-plated brass with nitrile seals and AISI 316 stainless steel with Viton seals.
CEJN non-drip couplings are offered in four safety levels, enabling users to select the exact level of safety required. All levels are available with an optional safety-locking device that eliminates the risk of unintentional disconnection.
|
|
General Purpose Couplings
Colder Products Company - a world leader in the design of plastic, quick disconnect couplings for plastic tubing - has combined innovative engineering with leading edge manufacturing to provide a diverse range of fluid management solutions worldwide. For over 25 years, Colder has been providing connection solutions for industrial, biopharmaceutical, medical, chemical, food/beverage, and chemical applications.
Colder Products' quick disconnect couplings are available in a variety of sizes, styles, terminations, and configurations. Material options include acetal, polypropylene, polysulfone, aluminum, chrome-plated brass, and die-cast, nickel-plated zinc.
|
|
A solution for each of your applications !
Designed for applications in all industrial sectors and research and development for the connection of your circuits of : gases (hydrogen, argon, nitrogen, helium, etc), steam, solvants and acids, liquids, high pressures, vacuum%u2026
The RBE ALL FLUID RANGE offers you a product range which is: :
- A modular design.
- Reliable.
- Quick and automatic.
- Efficient.
- Safe.
- Leak tight.
|
|
All-Purpose Clean Break Series CN
Features:
The squirt-free clean break couplings of the CN series are mainly used in the chemical industry, for the loading and transport of fluids, e.g. at hose stations. Other application areas are also possible.
Due to the special design principle, a squirt-free connection and disconnection, even with long, filled hose lines under pressure up to 5 bar, is possible.
In case of limited space the handwheel can be dispensed with, due to the small operating force of the CN-025. A hook wrench can be used instead.
Key Benefits:
• clean break coupling with bayonet locking
• squirt-free operation
• connects under residual pressure
• small dimensions
• very good flow rates
Nominal Sizes:
25, 50, 80 and 100 mm
Media:
• water
• compressed air
• diverse fluids
• fuel
• lubricating greases / oils
• technical gases
Pressure Range:
up to 25 bar, depending on the nominal size
|
|
|
|
|
|
NS2 Couplings Deliver Cost-Efficient, High-Flow Fluid Line Transfer in a Small Footprint, Safely and Economically
Colder Products’ NS2 Series compact, non-spill quick disconnect couplings provides users with fast, safe and virtually leak-free fluid line connections. An excellent choice for printing and ink management, analytical instrumentation, electronic cooling, and many other applications, the patent-pending NS2 couplings provide high-flow fluid transfer in a small footprint.
For applications that require the safe transfer of fluids, the NS2 offers an easy, twist-to-connect locking mechanism and double-sided non-spill shutoff valves for added safety and convenience.
The NS2 meets the need for smaller, more cost-effective industrial couplings. The smaller couplings can replace larger ones, offering users a low-cost, space-saving option for a wide variety of coupling applications. The NS2 couplings also offer very low air inclusion – air induced into the coupling upon connection – minimizing contaminants and reducing the need to purge fluid lines.
Colder NS2 Series quick disconnect couplings are available in a variety of sizes and configurations.
|
|
NSH Series Couplings
Colder Products’ patented NSH Series couplings feature a pressure-balanced, non-spill design and a 100% metal-free, spring-free flow path at a very competitive price. These innovative couplings are easy to use (single-handed operation) and provide high flow capacity. Their non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety.
|
|
NS4 Non-Spill Quick Disconnect Couplings
Colder Products’ patented NS4 Series couplings feature non-spill valves in a compact size, at a great price. Use the NS4 when even a few spilled or leaked drops of fluid pose problems regarding safety, environmental regulations or media cost. These innovative couplings are lightweight, chemically resistant and easy to use. The non-spill design virtually eliminates spills, minimizes downtime and enhances operator safety.
|
|
|
Global Manufacturer of Quick Release - Quick Disconnect - Quick Connect Hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or Pneumatic fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite.
|
|
Non spill design
Flush faced and non-spill, HCB ensures no air inclusion into the system when connecting as well as spillage when disconnecting.
Easy to use
Compact and user friendly, the HCB connector is easy to operate. In connected position, plug and socket dust caps can be mated together. Stainless steel dust caps available on request.
Applications
All fluids
* gas
* steam
* vacuum
* aggressive fluids
for all industrial sectors.
|
|
|
|
|
|
Our experts for special cases: Highest safety ex works!
Ball-Face Clean Break coupling for difficult fluid or gaseous media
BF series
Features:
Clean break coupling made of stainless steel, especially suited for difficult fluid or gaseous media. Adhering to highest safety standards and optimally operable through automatic locking, they are primarily designed for applications in the chemical industry.
This series is suited for non-lubricating media (as e.g. demineralised water, “dry gases”) as well as lubricating media. Tried, tested and proven for solvents, chemical fluids and water vapour. Also used for lyes, a wide variety of acids and many other media.
Key Benefits:
• clean break (low-loss operation with few inclusions)
• easy to clean smooth ball-face outer surface
• squirt-free
• minimal couple force
• safety through positively controlled locking and valve opening process (nominal
sizes 25 and 50 mm)
• automatic locking
• well proven
• nominal sizes 25 and 50 mm connectable under operating pressure by separate locking and valve opening process
Nominal Sizes:
5, 9, 12, 25 and 50 mm
Media:
• water, water vapour, solvents, acids, soap solutions, lyes, oils, all non-lubricating media and many more
• for difficult and gaseous media, primarily for the chemical industry
Pressure range:
up to 64 bar, depending on the nominal size
|
|
|
SafeWay’s FFE49 Series is a non-spill, push-to-connect, fluid transfer quick coupling designed for use with most industrial fluids. This series is interchangeable with quick couplings meeting International Standard ISO 16028 dimensional requirements, and our field proven, heavy-duty FF49 Series. Some basic applications include skid-steer loaders, power utility equipment, construction equipment, agricultural equipment, and hydraulic hand tools. Use this quick coupling series whenever spillage can result in a safety or environmental hazard, when air inclusion during connection to a hydraulic system cannot be tolerated, and when international interchangeability with other brands is required.
|
|
|
The dry break quick disconnect functions similar to a double shut-off quick disconnect however it provides a higher level of sealing during connection and disconnection. The dry break connects without leakage or fluid spray. Additionally, the design minimizes dead volume (the space between the internal and external ends when connected) to essentially eliminate any leakage when disconnecting.
|
|
Nitto Kohki couplers provide quick and easy connection/disconnection of fluid lines such as water, oil, gas, and air. They completely eliminate the inconvenience of connecting/disconnecting conventional thread type couplings or flanges, fluid leakage, and hose kinking, while providing quick, convenient control and maintenance of fluid line connections.
Please get informed about our wide range of couplings for almost any case.
We als produce couplings for customers special demands.
|
|
|
Global Manufacturer of Quick Release - Quick Disconnect Hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite.
|
|
A solution for each of your applications !
Designed for applications in all industrial sectors and research and development for the connection of your circuits of : gases (hydrogen, argon, nitrogen, helium, etc), steam, solvants and acids, liquids, high pressures, vacuum...
The RBE ALL FLUID RANGE offers you a product range which is:
- A modular design.
- Reliable.
- Quick and automatic.
- Efficient.
- Safe.
- Leak tight.
|
|
General description : The "Evergreen" HK Products - The Proven Hansen Design Series
Double shutoff feature, robust and safe in any application
Technical Data
- Connects/disconnects liquid, gas or steam lines quickly
- Nominal diameters from DN 4 to DN 125
- For vacuum and pressure up to 550 bar, at -60°C to +315°C
- Double, single shutoff or without shutoff function
- High operational safety: integrated shutoff valves reliably prevent product losses when the coupling is disconnected
- Proven locking mechanism: automatic ball locking for high operational safety
- All types of connection: numerous thread types, hose nipples, flanges, special connections
- Stainless steel, steel, brass, aluminum, Hastelloy, titanium
|
|
|
SafeWay’s S10 Series is a general purpose, double shut-off quick coupling capable of containing a wide variety of fluids. Primarily used for the transfer of hydraulic fluid, they can also be used with water, steam, chemicals and some gases. Widely used in both stationary and mobile industrial applications.
|
|
|
SafeWay’s S70 Series offers unique internal valving, combined with SafeWay’s two-way sleeve feature, allowing one-hand connection under full system pressure. The body (coupling) half can be mated to either a ball valve or poppet valve ISO male tip (nipple). The S70 Series is used primarily with agricultural equipment. It is original equipment on full size tractors and front-end loaders. Use when connection and disconnection under pressure, without the use of tools, is desirable.
|
|
|
The SH20 Series is a general purpose, double shut-off quick coupling capable of containing a wide variety of fluids. This series can be found anywhere a dependable connection and disconnection of a fluid transfer line is required. Through the years, this interchange has been widely used on both mobile and industrial applications. They can be found on garden tractors, self-propelled combines, skid-steer loaders, wire pullers, and hydraulic presses.
|
|
Couplings for cooling circuits, cold water, hot water, glycol solution, thermal transfer fluids, oils.
Sealing couplings with brass check valve.
Couplings to be used with a straight through or self-sealing fitting.
Clearance diameter for fluid : 6, 9, 12 or 16 mm
|
|
Advantages
All Parker hose barb fitting pipe threads are made to Dryseal standards.
Connectors, unions, nuts and extended elbows and tees are machined from CA 360 and CA 345 brass.
|
|
DIAGNOSTIC quick-release couplings have been purposely designed to make the maintenance of hydraulic systems and checking pressure within the circuit easier, quicker and more effective. Male couplings have to be assembled on the hydraulic line to be checked while the female parts have to be connected to the diagnostic and monitoring equipment. Conformity to ISO 15171-1 standards guarantees worldwide interchangeability.
Applications
* Agriculture machines
* Forestry machines
* Earth moving machines
* Road machines
|
|
|
Deublin Offers a full range of Rotary Unions with Ball Bearings. Some are sealed and do not require any lubrication while others have a gease nipple and require periodic lubrication.
|
|
Series 9000
Series with ball bearings and bellows sealing assembly
Available in stainless steel
CD-Cartridge-Design
Recommended medium Heat transfer oil, Air, Steam, Water, Non-toxic industrial gases, Lyes (on request)
Available sizes 1/4" - 4"
Max. speed 1500 RPM (depending on size)
Max. temperature 190 °C
Max. pressure:
Water 17,0 bar
Steam 10,2 bar
Heat transfer oil 6,8 bar
Air 6,8 bar
|
|
Brass Fitting
- Push to connect
- Brass pipe
- Compression type
Product Specifications
- Temperature Range -40 ° F to 325° F
- Pressure 250 Psi nominal / 400 Psi Max
- Shape Material Forged SAE CA377 Brass
|
|
Parker's 5500 Self-Sealing Brass Couplings are used in fluid-transfer applications for easy maintenance on refrigeration and air-conditioning systems. Applications can also include marine refrigeration and air-conditioning systems, along with split refrigeration systems.
* Self-sealing upon disconnection maintains minimum inclusion of air and loss of fluid.
* Brass coupling provides corrosion resistance.
* Final metal-to-metal seal provides low leakage.
* Copper-sweat connections provide basic ends for brazing and eliminate the need for flux, simplifying the installation process.
* Panel mounting options are available for the unique needs of a unit.
Parker's FD57 Stub Kit Couplings are used in fluid-transfer applications for easy maintenance on factory pre-charged heat pump and split air conditioning systems.
* Easy installation of replacement units.
* Direct copper brazing capability.
* UL recognized
|
|
|
Tompkins Brass Adapters are made from CA360 Brass/Schedule 40. Rolled threads and one-piece design is perfect for all air/water-lower pressure applications (up to 2000psi) and Temperature ranges of -65 F to +250 F. Available in SAE 45 degree, JIC 37 degree, Hose Barb, compression, poly-flow, pipe, inverted flare, and poly-push with the broadest selection of jump sizes and configurations in the industry. Meets or exceeds all SAE standards.
|
|
|
|
Couplings, Sleeves
