shut-off valve
shut-off valve
ZV 29/300

Operating pressure: 0 bar - 300 bar
DN: 29 mm
Flow rate: 0 l/s - 1000 l/s

The ZV 29/300 is a cheap flow stopper for reduced closing pressure. It prevents leakage of delivery medium during sidestep operation of the pump. This assembly can handle pressure up to 3 bars. It can replace the shut-off valve, such ...

shut-off valve
shut-off valve
ZV 25/400

Operating pressure: 0 bar - 400 bar
DN: 25 mm
Flow rate: 0 l/min - 650 l/min

The VZV 25/400 is a flow stopper designed to deal with moderate closing pressure. In its presence, there is no need to worry about material leakage during sidestep operation of the pump. It can handle pressure up to 15 bars. It can replace ...

shut-off valve
shut-off valve
PZV 23/800

Operating pressure: 0 bar - 800 bar
DN: 23 mm
Flow rate: 0 l/min - 800 l/min

This flow stopper valve manufactured by Uraca is recommended for higher closing pressures. The flow stopper valve positively stops the slippage of transfer medium while the bypass operation of the pump happens. That makes this valve ...

pneumatic valve / shut-off
pneumatic valve
PZV 12/1200

Operating pressure: 0 bar - 1200 bar
DN: 12 mm
Flow rate: 0 l/min - 250 l/min

The Uraca PZV 12/1200 is a flow stopper valve that can restrict the escape of delivery medium during the by-pass process of the pump at approximately up to 75bar. This valve deliver low pressure loss in high pressure operations. Furthermore, ...

pneumatic pressure-control valve / shut-off / 3-way
pneumatic pressure-control valve
JVS1

Operating pressure: 8 bar
Flow rate: 1050 l/min - 4650 l/min

shut-off valve / pneumatic pressure-control / 3-way

gate valve / shut-off / for water / air-operated
gate valve
T-DEP, T-SEP series

Temperature: -30 °C - 100 °C
Operating pressure: 5 bar
DN: 0.75, 2.5, 1, 1, 2 in

Double acting (T-DEP) or single acting (T-SEP) N.O. gate valves are mainly used to isolate fluids. The seating is metal to metal and can be used for air, or gasses if minimal leakage is acceptable. The gate valves can be operated remotely ...

pneumatic valve / shut-off / for gas
pneumatic valve
KVF

Temperature: 180 °C
Operating pressure: 40 bar
DN: 15 mm - 50 mm

Being part of the proven KÜHME high-performance valve series for industrial applications, the valve type KVF is used in any application area for which the quick and safe shut-off of gaseous media as well as fuels is required. The electro-pneumatically ...

See the other products
Kühme Armaturen GmbH
butterfly valve / pneumatic / shut-off / for gas
butterfly valve
PKIII

Temperature: 300 °C
Operating pressure: 2.5 bar
DN: 300 mm - 3000 mm

Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is used in any application where safe and quick shut-off of gaseous media is required. The electro-pneumatically controlled quick-closing ...

See the other products
Kühme Armaturen GmbH
automatic valve / shut-off / for gas
automatic valve
KSK-HLK

Temperature: 300 °C
Operating pressure: 0.5 bar
DN: 150 mm - 800 mm

Coal dust dampers are used in pipings of coal fired power plants between mills and burners. The purpose of these dampers is to shut-off individually the coal feeding line upstream the burner when the corresponding mill is out of service.
The ...

See the other products
Kühme Armaturen GmbH
lever valve / shut-off / for gas
lever valve
KSK

Temperature: 300 °C
Operating pressure: 0.5 bar
DN: 900 mm

Coal dust dampers in rectangular design are used most likely in vertical pipings of coal fired power plants between mills and burners. The purpose of these dampers is to shut-off individually the coal feeding line upstream the burner ...

See the other products
Kühme Armaturen GmbH
pneumatic valve / shut-off / for gas turbines
pneumatic valve
KVH/HT

Temperature: 225 °C
Operating pressure: 40 bar
DN: 50 mm - 300 mm

Especially designed for use during the emergency shut-down (ESD) of gas turbines, valve type KVH/HT features highest reliability in regards to safe quick shut-down. The corresponding design features adapted to this specific application ...

See the other products
Kühme Armaturen GmbH
bellows valve / handwheel / stop / cast steel
bellows valve
237

Temperature: -60 °C - 450 °C
Operating pressure: 40 bar
DN: 15 mm - 100 mm

Features: high thightness (leakproofness class - A acc. to EN - 12266 - 1 compact settlement environment friendly tests acc. to EN - 12266 - 1 face-to-face dimension according to EN 558 series 1 Applications: industry shipbuilding ...

See the other products
ZETKAMA Sp. z o.o.
globe valve / manually-controlled / shut-off / for hot water
globe valve
216

Temperature: -10 °C - 350 °C
Operating pressure: 10, 25, 6, 16 bar
DN: 15 mm - 300 mm

Globe valves with angle body are manufactured at different executions, they are used as stop valves, throttling valves ) and SDNR valves. Internal parts are made in stainless steel and brass/bronze as a alternative. Material: Grey cast ...

See the other products
ZETKAMA Sp. z o.o.
globe valve / manually-controlled / shut-off / for hot water
globe valve
DN 15 - 300, PN 6 - 40, -10 °C ... +400 °C | 215

Temperature: -10 °C - 400 °C
Operating pressure: 25, 16, 6, 10, 40 bar
DN: 15 mm - 300 mm

Globe valves are manufactured at different executions, they are used as stop valves, throttling valves (regulating function) and SDNR valves (screw down non return valve). Internal parts are made in stainless steel and brass/bronze as ...

See the other products
ZETKAMA Sp. z o.o.
globe valve / manually-controlled / shut-off / for hot water
globe valve
201

Temperature: -10 °C - 200 °C
Operating pressure: 16 bar
DN: 10 mm - 50 mm

Globe valves with threaded ends are designed only for shut off and open the flow function. Valve can be also offered with PTFE gasket. Material: Grey cast iron Nominal pressure: 16 bar Nominal diameter: 10-50 mm Temperature range: -10...+200°C high ...

See the other products
ZETKAMA Sp. z o.o.
bellows valve / manually-controlled / shut-off / for hot water
bellows valve
234

Temperature: -10 °C - 400 °C
Operating pressure: 25, 40, 16 bar
DN: 15 mm - 250 mm

Globe valves with bellow seal are manufactured in two executions, they are used as stop valves or throttling valves. Stem sealing is performed by flexible bellow and additional protecting gland. Type with electric actuator is also available. Material: Grey ...

See the other products
ZETKAMA Sp. z o.o.
butterfly valve / shut-off
butterfly valve

Temperature: -5 °C - 200 °C
Operating pressure: 10, 3.5, 6, 16 bar
DN: 2 in - 24 in

Bi-directional zero leakage Butterfly valve Accurate dual stem sealing prevents leakage ISO Pad for mounting Complete Valve Automation solution with Rotex make accessories

butterfly valve / lever / shut-off / regulating
butterfly valve
FE DN 40-200

Temperature: 0 °C - 60 °C
Operating pressure: 4 bar - 16 bar
DN: 11, 17, 22, 14 mm

The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System. MAIN FEATURES: -Ergonomic multifunctional handle in HIPVC with the ...

See the other products
FIP - Formatura Iniezione Polimeri
butterfly valve / lever / shut-off / regulating
butterfly valve
FK DN 40-300

Temperature: 0 °C - 100 °C
Operating pressure: 6 bar - 16 bar
DN: 27, 17, 22, 14, 11 mm

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the ...

See the other products
FIP - Formatura Iniezione Polimeri
diaphragm valve / mechanical / shut-off / regulating
diaphragm valve
DK DN 15-65

Temperature: -20 °C - 120 °C
Operating pressure: 0 bar - 10 bar
DN: 15 mm - 65 mm

The new DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an ...

See the other products
FIP - Formatura Iniezione Polimeri
diaphragm valve / shut-off / regulating / PVC
diaphragm valve
VM/RM DN 8-15

Temperature: 0 °C - 60 °C
Operating pressure: 10, 4 bar
DN: 8, 15 mm

The VM mini-valve and RM diaphragm cock valve are both used to shut-off and regulate fluid flow and are characterised by their reduced size. MINI-DIAPHRAGM VALVE • Connection system for solvent weld and threaded joints • Extremely ...

See the other products
FIP - Formatura Iniezione Polimeri
diaphragm valve / handwheel / shut-off / regulating
diaphragm valve
VM DN 15-100

Temperature: -20 °C - 120 °C
Operating pressure: 0 bar - 10 bar
DN: 15 mm - 100 mm

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. MAIN FEATURES: -Handwheel ...

See the other products
FIP - Formatura Iniezione Polimeri
ball valve / manually-controlled / shut-off / for corrosive fluids
ball valve

Temperature: 0 °C - 180 °C
Operating pressure: 20 bar
DN: 0.5 in - 12 in

The DOXI Ball Valve is PFA lined, Cast Steel, ANSI Class 150 flanged Full Port Ball Valve. It can be equipped with a manual handle or with pneumatic or electric actuators. Features & Benefits Dakin PFA liner • PFA liner is "Locked-in" ...

ball valve / lever / shut-off / for corrosive fluids
ball valve

Temperature: 0 °C - 180 °C
Operating pressure: 0 Pa - 2000000 Pa
DN: 25 mm - 250 mm

DOXI Ball Valve is PFA lined, Cast Steel, ANSI Class 150 flanged Full Port Ball Valve. It can be equipped with a manual handle or with pneumatic or electric actuators. Features & Benefits Dakin PFA liner • PFA liner is "Locked-in" ...

butterfly valve / shut-off / with actuator / PFA-lined
butterfly valve
DN50-DN2000, ANSI/DIN/JIS/AS

DOXI ® Butterfly Valves is a good choice for chemical solution! Its special feature is the seat ring design. The interference between the disc and the raised central area of the seat ring shuts off the flow completely. The resilient elastomeric ...

ball valve / pneumatic / shut-off / with actuator
ball valve

Temperature: -30 °C - 200 °C
Operating pressure: 1600000, 1000000 Pa
DN: 15 mm - 350 mm

The PFA lined ball valve is a lined valve manufactured by Youfumi. It has a pressure range of Class150, PN10, and PN16 and a nominal diameter ranging between 1/2in to 14in. With a lining made up of PTFE, PFA, PO, and FEP, the valve ...

ball valve / manual / shut-off / for nitrogen
ball valve

DN: 15 mm - 300 mm

Technical Specification Design and Manufacture Standard: ASME B16.34, HG/T 3704 Face-to-face Dimension: ASME B16.10 , GB/T 12221 Flange Standard: ASME B 16.5 ,GB/T 9119 ,DIN ,JIS Inspection and Testing: API 598, GB/T 13927 Product ...

ball valve / manual / shut-off / in plastic
ball valve

The product is developed with an ASME/ANSI 16.5 flange standard with an end-to-end dimension of HG/T3704 designed and produced by ASME B16.34. It is equipped with a lining material of PVC PFA, FEP,PO with a DN15-450 nominal diameter, ...

globe valve / manual / shut-off / for chemicals
globe valve

Temperature: -30 °C - 200 °C
Operating pressure: 1600000, 1000000 Pa
DN: 15 mm - 350 mm

The PFA, manufactured by Youfumi, is a lined globe valve that features a nominal diameter of 1/2"-14" and pressure ranges of Class150, PN10 and PN16. It also comes with a pneumatic actuator operation method. This offers a lining material ...

automatic valve / shut-off / zero-bleed
automatic valve
NSF61/CE/ISO9001, Leak Alarm, Closed Valve Automaticlly

Temperature: -20 °C - 80 °C
Operating pressure: 1000000 Pa
DN: 0.5, 0.75, 1 in

This product comes with many features and functions. When there is an alarm, the valves will close automatically in response to a leakage. The power supply comes with 2AA, five batteries. When the power is too low, the alarm is triggered ...

ball valve / electric / shut-off / for water
ball valve
T20-B3-B

Temperature: -15 °C - 50 °C
Operating pressure: 1000000 Pa
DN: 0.75, 0.5, 1 in

The Tonhe T15-B3-B 3 Way T Type Electric Shut-off Valve is made from China, and is suitable for use in water heaters, water meters and water treatment. The maximum pressure is 1.0Mpa while the torque is 2Nm. Wiring control methods are ...

ball valve / mechanical / shut-off / for HVAC installations
ball valve
T25-B2-A

Temperature: -15 °C - 50 °C
Operating pressure: 1000000 Pa
DN: 0.25 in - 1.25 in

The Tonhe T25-B2-A motorized shut off valve is specially designed to accommodate heating, ventilation and air conditioning applications. It uses NPT and BSP threads with a brass valve unit. This valve assembly generates 1.0 Mpa pressure ...

manual valve / shut-off
manual valve
16 MPa, max. 200 °C

Temperature: max 200.0 °C
Operating pressure: max 1.6E7 Pa

This cut-off valve is produced to operate in metallurgy, chemical, medicine and instrument applications, performing as media control device in tube installation project. Besides, Micro sensor has our own R&D team to meet customers unique ...

piston valve / hydraulic / pressure reducing / stop
piston valve
6917-1

Operating pressure: 400 bar

This product has a cylinder body that is made of phosphatized steel while the remaining part is made of tempering steel. The valve seat, which is a leak free valve, and the piston are hardened and ground. This is applicable for stopping ...

ball valve / manually-controlled / shut-off
ball valve
7800AV

DN: 6 mm

The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.

gate valve / handwheel / shut-off / for chemicals
gate valve
Class150-2500 LB

Operating pressure: 150 psi - 2500 psi
DN: 2 in - 48 in

JPG parallel double plate gate valve design according to API 6D, have without conduit hole gate, though conduit hole gate, expanding gate, double block & bleed, double isolation&bleed, drain & vent, emergency sealant injection, fire ...

globe valve / handwheel / shut-off / petroleum
globe valve
Class150-2500 LB

Operating pressure: 150 psi - 2500 psi
DN: 2 in - 24 in

JPG API globe valve is produced according to API standard in design, manufacturing, and inspection. It is compact in pattern, reliable in sealing and easy to operate. It is used in petroleum, chemical, electric power, textile, metallurgy ...

needle valve / screw / shut-off
needle valve
NV series

Operating pressure: 500 psi
DN: 0.8 mm - 1.5 mm

This needle valve comes with an adjustable orifice, which can be used to control flow rates, as well as timing circuits, filing heads, bleeding vents and various other applications. In addition to this, the adjusted flow remains stable ...

shut-off valve / for samples / thermal
shut-off valve
49 °C, 303 bar

The Sentry Thermal Shutoff Valve protects personnel, analyzers and sampling components against high temperature gases or liquids. It is constructed in a 316 stainless-steel framework with standard drip temperature of 49 ºC. It integrates ...

gate valve / shut-off / for wastewater / cast iron
gate valve
2004 / 4004

Temperature: -10 °C - 60 °C
Operating pressure: 10, 16 bar
DN: 40 mm - 300 mm

Versions with flange connection with socket connection Medium temperature range for gas and drinking water - 10 °C bis + 60 °C Corrosion protection Seamlessly and fully enamelled shock-resistant housing inside and ...

gate valve / shut-off / for water / flange
gate valve
2004 / 4004

Temperature: 0 °C - 60 °C
Operating pressure: 16, 10 bar
DN: 80 mm - 200 mm

Area of application water for drinking and untreated water up to PN 10/16 for all plant and pipeline network operators Area of temperature ambient temperature up to + 60 °C The basis of this valve is the tried and tested ...

gate valve / shut-off / for gas / with butt weld ends
gate valve
3004

Resilient seated with a smooth passage according to DIN EN 13774. Housing and head piece in GJS-400-18 with shoed ends from St. 35.8 edge form 22. Wedge with new guidance, vulcanized plastic sliding shoes. Stainless austenitic Cr steel ...

butterfly valve / pneumatic / shut-off / for water
butterfly valve

Düker butterfly valves are enamelled inside and outside as per the requirements of the DEV guideline and DIN 51178. They can be used both for drinking water and raw water and for all gas types including pressurized air, other media ...

pinch valve / pneumatic / shut-off / with internally-threaded connectors
pinch valve
DIN EN ISO 228, VMP Series

Operating pressure: 4.5, 6 bar
DN: 10 mm - 50 mm

Type VMP Compact are air operated pinch valves enhanced for the automatic shut off and dosing of few several bulk and solids. Examples of these solids are powder, granule, paste, suspension and pellets. Moreover these valves are ...

flow control valve / pressure-control / stop
flow control valve

Operating pressure: 500 bar
Flow rate: 60 l/min

The Clamp-in Valve encompasses of different tools which can be utilized to cater an array of applications. This includes the stop, pressure, flow control and stop valves. All of these valves are equipped with the ability to deliver up ...

butterfly valve / manual / shut-off / vacuum
butterfly valve
IVWF series

Temperature: -15 °C - 100 °C
Operating pressure: 29 psi
DN: 10 mm

The IVWF series shutoff valves have a simple structure, and can be installed in the vacuum exhaust line of a semiconductor tools. The valve shuts off flow when rotating the flapper type valve mechanism 90°.

pneumatic valve / shut-off
pneumatic valve
VO series

Temperature: -10 °C - 70 °C
Operating pressure: 1 bar - 10 bar
DN: 0.38, 0.25, 0.12, 0.5 mm

The AIRWORK Stop valves functions as the lock of the cylinder's stroke. Usually, these stop valves are use on the cases when the system is losing it's pressure. These valves are equipped straight to the cylinder's supply. The AIRWORK ...

pneumatic valve / shut-off
pneumatic valve
XV1 series

Temperature: -10 °C - 50 °C
Operating pressure: 15 bar
DN: 0.75, 1, 0.38, 0.5, 0.25 in

The product has a maximum pressure of 15 bar, with a minimum temperature of -10 /and goes up to +50° C. This valve uses air as a fluid medium. To continue, 6bar flow rate with ∆p 1bar, in which 1 is 1850 Nl/min, 2 is 3000 Nl/min, and ...

globe valve / manual / shut-off / flange
globe valve
Locks®

Temperature: -40 °C - 65 °C
Operating pressure: 24 bar
DN: 10 mm

The LOCKS® is a transport globe valve that is used for pressure vessels and portable gas cylinders that can hold liquids of up to 999 liters. It is mainly manufactured for the transportation of harmful liquids and act as a shut off tool ...