|
|
Different types :
washer holder
semi-quick
coupling and rotating
Can fit pipe sizes of Ø int. minimum 4 mm maximum 50 mm
|
|
|
|
|
|
ISO-QF (Quick Flange) and LF (Large Flange) flanges are part of the same family of ISO standard elastomer sealed vacuum components designed for high vacuum service. A&N ISO flanges and fittings are manufactured in accordance with ISO (International Standard Organization) 2861 standards and tolerances. These flanges are an economical, convenient, and simplified means of constructing custom vacuum systems. ISO flanges, along with CF flanges, represent the most commonly used vacuum flange systems around the globe.
Standard QF flanges have bore (tube) sizes that range from 16mm to 50mm (QF16 to QF50). In addition, A&N offers a range of QF flanges from 63 to 200mm. QF flanges are fastened with quick style clamps and are sealed with an elastomeric o-ring. LF flanges have bore (tube) sizes that range from 63mm to 500mm (LF63 to LF500). LF style flanges are fastened with claw-style clamps or with bolts. Adaptive bolt rings are available that allow the conversion from claw-style flanges to bolt-style flanges. LF flanges are also sealed with an elastomeric o-ring.
|
|
Short description
Our Vacuum Union seals any tubing or tabulations in the sizes. These Vacuum Unions are mounted either by brazing or welding and are manufactured in stainless steel.
|
|
CF and Wire Seal flanges are part of the same family of Ultra-High vacuum components that compress a copper gasket between two stainless steel flanges to create a vacuum tight seal.
CF flange systems are more commonly used within the vacuum industry and therefore have a larger standard product offering. CF flanges are specified by their outer diameter. A&N CF flanges are manufactured to industry standards and are interchangeable with all other Conflat® style flanges and fittings. Industry standard sizes range from 1.33” to 16.5”.
Wire Seal flanges are desirable for those applications that require flanges larger than those available with the CF flange system. Wire Seal flanges have no industry standard dimension specifications. While vacuum component manufacturers endeavor to create interchangeable flanges, the only way to ensure compatibility is to purchase a mating set of wire seal flanges from a single manufacturer.
|
|
|
FG Inox offers a wide range of clamp unions, pipe accessories and valves for food applications from 12mm to 104mm.
|
|
General description :
MDC ASA-style flanges mate with standard 150 lb. ASA-ANSI flanges. Flanges are offered with choice of smooth face or O-ring groove. Eight flange sizes are detailed in this section. They are available blank or bored to fit tube sizes 1-1/2" through 12" O.D.
The vacuum seal is made by compressing an O-ring between a mating pair of flanges. The pair includes a smooth face flange and an O-ring grooved flange.
Features :
- High Vacuum rated to 1x10-8 Torr
- Temperature rated to 200°C maximum
- Viton® elastomer seal
- Rotatable Bolt Rings available for LF sizes.
- Smooth face or with O-ring groove
- ANSI compatible design
|
|
AB TRASMISSIONI manufactures a wide range of rings and adaptors, both in cast iron and welded iron, for connection between diesel engines and: alternators, irrigation pumps, hydraulic pumps, hydraulic engines, compressors, gearboxes, inverters, etc.
Standard adaptors have unified SAE J617b sizes, but, for specific needs, customers-specific adaptors and rings can also be produced.
|
|
With the full faced flanges out of PE 100, AGRU offers a perfect joining possibility to other materials.
Since a lot of fitting-accessories (slide valves, flaps or subterranean hydrants) are manufactured out of gray cast iron with spheroidal graphite, these full faced flanges were developed. By using them an unproblematic integration of other materials into a piping system out of polyethylene is possible. The full faced flanges are available in the dimensions 90, 110, 125, 160 as well as 180 and in the dimensioning SDR 11.
The constructive design of the full faced flange allows a permanent leak-proof connection. The hole pattern is in accordance with DIN 2501,
sheet 1. The long welding ends allow butt welding as well as electro-fusion.
A permanent stability as regards form and pressure is ensured by the use of PE 100 material and the integrated steel core.
|
|
|
Nor-Cal's ASA flanges are manufactured from specially treated 304 stainless steel. These flanges mate with standard 150 lb. ASA flanges or 150 ANSI flanges. They are available from stock for standard tube sizes from two to 12 inches. Larger sizes are available upon request. Nuts and bolts are used to apply pressure between the mating flanges and a seal is effected when a Viton-A® O-ring is compressed. ASA flanges can be baked to 204°C and have a vacuum range of up to 10-8 Torr. Besides being sold separately, they are available as standards on nipples, adapters, tees, crosses, traps, elbows and valves.
|
|
The flanges are the removable rigid connection by far more used, either for pipes or other mechanical items.
OMT manufacture a variety of forged types of flanges, as steel SAE flange, with threads GAS and NPT, weld in and weld on, standard or 90°.
|
|
| ... products without technical information |
| |
Different types :
washer holder
semi-quick
coupling and rotating
Can fit pipe sizes of Ø int. minimum 4 mm maximum 50 mm
|
|
|
|
|
|
ISO-QF (Quick Flange) and LF (Large Flange) flanges are part of the same family of ISO standard elastomer sealed vacuum components designed for high vacuum service. A&N ISO flanges and fittings are manufactured in accordance with ISO (International Standard Organization) 2861 standards and tolerances. These flanges are an economical, convenient, and simplified means of constructing custom vacuum systems. ISO flanges, along with CF flanges, represent the most commonly used vacuum flange systems around the globe.
Standard QF flanges have bore (tube) sizes that range from 16mm to 50mm (QF16 to QF50). In addition, A&N offers a range of QF flanges from 63 to 200mm. QF flanges are fastened with quick style clamps and are sealed with an elastomeric o-ring. LF flanges have bore (tube) sizes that range from 63mm to 500mm (LF63 to LF500). LF style flanges are fastened with claw-style clamps or with bolts. Adaptive bolt rings are available that allow the conversion from claw-style flanges to bolt-style flanges. LF flanges are also sealed with an elastomeric o-ring.
|
|
Short description
Our Vacuum Union seals any tubing or tabulations in the sizes. These Vacuum Unions are mounted either by brazing or welding and are manufactured in stainless steel.
|
|
Description:
Hydraulic flanges high pressure
Advantages:
- In conformity with the standards ISO 6162 -1 and -2 and SAE J518
- More than 60 configurations different of ½ to 5 inches
- Forged Flanges
- Range supplements accessories (screw, seals.)
Applications:
All applications of public works and industrial equipment like the presses, hydraulic power units, pumps, etc
|
|
AB TRASMISSIONI manufactures a wide range of rings and adaptors, both in cast iron and welded iron, for connection between diesel engines and: alternators, irrigation pumps, hydraulic pumps, hydraulic engines, compressors, gearboxes, inverters, etc.
Standard adaptors have unified SAE J617b sizes, but, for specific needs, customers-specific adaptors and rings can also be produced.
|
|
With the full faced flanges out of PE 100, AGRU offers a perfect joining possibility to other materials.
Since a lot of fitting-accessories (slide valves, flaps or subterranean hydrants) are manufactured out of gray cast iron with spheroidal graphite, these full faced flanges were developed. By using them an unproblematic integration of other materials into a piping system out of polyethylene is possible. The full faced flanges are available in the dimensions 90, 110, 125, 160 as well as 180 and in the dimensioning SDR 11.
The constructive design of the full faced flange allows a permanent leak-proof connection. The hole pattern is in accordance with DIN 2501,
sheet 1. The long welding ends allow butt welding as well as electro-fusion.
A permanent stability as regards form and pressure is ensured by the use of PE 100 material and the integrated steel core.
|
|
|
Nor-Cal's ASA flanges are manufactured from specially treated 304 stainless steel. These flanges mate with standard 150 lb. ASA flanges or 150 ANSI flanges. They are available from stock for standard tube sizes from two to 12 inches. Larger sizes are available upon request. Nuts and bolts are used to apply pressure between the mating flanges and a seal is effected when a Viton-A® O-ring is compressed. ASA flanges can be baked to 204°C and have a vacuum range of up to 10-8 Torr. Besides being sold separately, they are available as standards on nipples, adapters, tees, crosses, traps, elbows and valves.
|
|
The flanges are the removable rigid connection by far more used, either for pipes or other mechanical items.
OMT manufacture a variety of forged types of flanges, as steel SAE flange, with threads GAS and NPT, weld in and weld on, standard or 90°.
|
|
BoWex® FLE-PA
* Torsionally rigid flange coupling
* Application: hydrostatic mobile hydraulics
* Available up to an engine power of 500 kW
* Flange dimensions according to SAE - J620
|
|
Key benefits:
Stronger connection than traditional"keyed" connections
Zero backlash due to keyless shaft/hub connection
No fretting corrosion on tapered faces
Reduced axial space required for installations
Quick disassembly for minimal downtime
Flange dimensions made to German RAG standard
Proven solution in many applications
Applications:
A rigid and easy to disassemble shaft coupling solution for:
Various types of elevators
Conveyor pulley drives
Bucket wheel excavators
Escalators and moving walkways
Many other possibilities
RINGSPANN will select the proper coupling for each application based upon the allowed transmissible torque under existing bending moment conditions. RINGSPANN%u2019s selection calculations are in accordance with the latest scientific knowledge and know how in the industry and include the proper safety factor to prevent fretting corrosion.
Series RFK 70 ... 290
for shaft diameters 50 up to 290 mm
max. Torque from 6000 up to 500000 Nm
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
