INGEDRIVE® is a family of low- and medium-voltage, modular AC drives, for demanding single-motor or multi-motor applications. They can handle and control synchronous motors, asynchronous induction motors, and permanent magnet motors. These drives are suitable for four-quadrant ...
The VXM is a high performance, programmable, 2 phase, unipolar stepper motor controller. It features:
* Small size (3.5" x 4.4" x 6.6") and ...
Brushless motor drive BLD-4202 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 52W motor with Hall encoder FL42BLS02 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed for joint action with the ...
Brushless motor drive BLD-4204
Brushless motor drive BLD-4204 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 105W motor with Hall encoder FL42BLS04 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed ...
Brushless motor drive BLD-5704 is complete set, which is ready to operate. The brushless drive consist of industrial 3-phase 180W motor with Hall encoder FL57BLS04 and brushless controller BLD-20 for adjusting speed, direction, acceleration and deceleration of the motor. Controller is designed for joint action with the ...
Today's venetian blind motors are the result of decades of experience ...
Expanded capability profile in comparison with traditional motors
based on AC-motors with mechanical end limit switches.
- Slow speed at each start in each direction of rotation enables
a sensitive setting of the slat angle thus an optimized controlling ...
This version is available at our brushless DC-motors at the BG44, BG45, BG65, BG75 as well as ...
IDM680 Intelligent Servo Drive with EtherCAT
Based on the Technosoft MotionChip™ technology, the IDM680 intelligent servo drive embeds motion programmer, drive and PLC functionalities into a single compact unit. This drive can operate either as a standard EtherCAT slave supporting CANopen over EtherCAT (CoE) protocol, or can be programmed to execute complex motion programs directly at drive ...
iPOS3604 BX Intelligent Servo Minidrive
The iPOS3604 BX is based on a new design concept for closed-frame drives, offering a very compact and cost-effective solution for the control of rotary or linear brushless, DC brush, and step motors of powers up to 144 W, with 36 V nominal voltage.
iPOS3604 BX Features:
• Fully digital servo drive suitable for the control of rotary ...
PIM2401 Intelligent Control Plug-in Module
PIM2401 is a cost-effective solution adapted to the distributed and co-ordinated control of motors up to 25 W, 24 V. PIM2401 is specially designed for motion control applications where space is dramatically limited. Its miniature size (49 x 44 x 14 mm,15 g) allow it to be mounted horizontally or vertically, inside the machine or near the motor. The ...
Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals.
Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an industry standard.
With line-to-line or line-to-neutral operation up to 48 Amps, you ...
This 4 Quadrant regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking.
Improve your energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. No dissipation of energy in wasteful ...
Make upgrading your existing control panel easier. Save space in new DC single direction motor control systems. The ultra compact DIN rail mounting package lets you install quickly.
Three options are available for controlling DC motors up to 12.2 Amps. You can use this versatile range of non-isolated controllers for permanent ...
• Input voltage from 12VDC to 48VDC
• Peak current up to 20 Amps Peak
• Continuous current up to 10 Amps
• Maximum wattage of 500 Watts
(more than 500 Watts requires a larger heat sink)
• Chopping ...
- 3-axis step motor controller and driver PCB
- Phase currents between 0.2 to 1.5 Amps/Phase (Software Programmable)
- Software selectable step resolutions from Full step, Half step, and 4x, 8x, 16x, 32x, 64x microstepping operating.
- ...
The TMCM-310 is a triple axis 2-phase stepper motor controller and driver module. It provides a complete single board motion control solution at low cost. Using the integrated additional I/Os it even can do complete system control applications. The motors and switches can be connected ...
The DS2000, our fully digital brushless servodrive, has been enhanced. Thanks to its improved control features and rationalized design, machine builders now have the optimal solution for accuracy, speed and reliability.
Features
Universally ...
For nearly two decades, the name Moog has been synonymous with high performance brushless servomotors and servodrives ...
The DS2000XP Servodrive is a self-contained, fully digital stand-alone motion control drive with a highly customizable interface for control of brushless motors and actuators in high performance closed-loop applications. This servodrive has a high-performance 32-bit floating-point Motorola MPC555 RISC CPU on board ...
Technology: Brushless Drive, Digital Servo
Quadrants: 4
Nominal Current: 8A or 12A
High Voltage, Small Package ... World Class Intelligence
The line powered ACE1000 Series is the newest addition to ElectroCraft's ...
Technology: Brushless Drive, Digital Servo
Quadrants: 4
Nominal Current: 5A
High Voltage, Small Package ... World Class Intelligence
The line powered ACE500 is the newest addition to the ElectroCraft "Plus" ...
Technology: Brushless Drive, Digital Servo
Quadrants: 4
Nominal Current: 3.5A, 5A or 10.6A
ACS : ElectroCraft CompletePower™ Plus Drives
Technology: Brushless Drive, Digital Servo
Quadrants: 4
Nominal Current: 3.5A, ...
The Inverter SIEIDrive – ADV20 series concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above ...
The Inverter SIEIDrive – ADV50 concentrates all the characteristics required by modern industrial processes in a single product while at the same time complying with the typical needs of installers and system integrators who require forefront, practical solutions that are, above all, ...
The GEFRAN range of ADV100 inverters is specifically designed to give the utmost flexibility of application to modern automation systems and ensure ease of use, while guaranteeing advanced control capabilities ...
Motor drive with through-going hexagon socket.
- integrated ...
Motor drive through-going hexagon socket.
Integrated ...
Motor driver with hollow shaft and spindle nut.
Motor drive with integrated ...
UIROBOT | stepper motor integrated with driver or controller
stepper motor + driver (pulse and direction)
stepper motor + controller ...
Miniature Integral Design
− Miniature size 42.3mm x 42.3mm x 16.5mm (L x W x H)
− Integrally designed to fit onto motors seamlessly, as well as work standalone
− Die-cast aluminum enclosure, improved heat dissipation and durability
Motor ...
UIM 24104 stepper motor controller with integrated drives
Intelligent Stepper Controller
Miniature Integral Design
Miniature Size 42.3mm*42.3mm*13.5mm
Fit onto motors seamlessly
Die-cast aluminum enclosure, ...
BLDC Driver C-1500-220 Special for For small
◆ AC220V power supply for
◆ Rated power 1500W
◆ rated speed to 6000RPM, speed range of 400-6000RPM, acceleration time 5S.
◆ PID closed-loop speed and current dual-loop regulator, speed-loop control accuracy of ± 1%
◆ has a limited flow, start-up ...
Brushless DC motor driver--C60-460
Characteristics:
◆Voltage ...
Integral Stepper Motor HI42
Typical Applications :
Frame
Characteristics:
Integral Design, all in one (controller, driver and motor)
Frame NEMA17 hybrid bipolar stepping motors
Different Rated Current
Holding Torque for your separate applications
HI42-a stepper motor could use CI240-2Astepper motor driver for building up an integrated stepper motor
HI42-b ...
