Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
... PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: ...
Albin Pump
Flow: 0.08 l/h - 3.6 l/h
Pressure: 2 bar
Power: 5 W - 12 W
Compact, low-flow dosing pump for continuous dosing at low speed or intermittent dosing. Its design has been thought to facilitate the change of hoses, without tools. Ease of use The ...
Flow: 0.94 l/h - 15 l/h
Pressure: 2 bar
Power: 12 W - 45 W
Compact, low-flow dosing pump for continuous dosing at low speed or intermittent dosing. Its design has been thought to facilitate the change of hoses, without tools. Ease of use The ...
Flow: 20.4 l/h - 126 l/h
Pressure: 2 bar
Power: 12 W - 45 W
Compact, low-flow dosing pump for continuous dosing at low speed or intermittent dosing. Its design has been thought to facilitate the change of hoses, without tools. Ease of use The ...
Flow: 1.8 l/h - 6.6 l/h
Pressure: 0.7, 1 MPa
Power: 20 kW - 24 kW
... gaseous liquid feeding This type equips automatic air vent mechanism. An air vent valve built-in pump chamber enables reliable air venting. Also equipped manual air vent valve enables easy pressure release ...
IWAKI Europe GmbH
Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW
... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application a various number ...
IWAKI Europe GmbH
Flow: 0.18 l/h - 300 l/h
Pressure: 0 Pa - 1,000,000 Pa
Power: 62 W
... solution for every chemical dosing application. Iwaki’s IX Series are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate ...
IWAKI Europe GmbH
Flow: 0.00001 l/min - 0.00081 l/min
The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are ...
Heidolph Instruments GmbH & Co. KG
Flow: 38 l/min
Pressure: 1.5 bar - 8 bar
Weight: 1.9 kg
Very compact and reliable polypropylene diaphragm pumps for medium to small volume transfer , dosing, spraying and dispensing a variety of fluids. Typical applications ...
SAMOA Industrial, S.A.
Flow: 100 l/min
Pressure: 1.5 bar - 8 bar
Head: 7, 4.5 m
Air operated double diaphragm pumps for dosing, spraying, transferring, evacuating and distributing a wide variety of fluids. Ideal for standard applications with medium flow rates. Very robust metal pumps ...
SAMOA Industrial, S.A.
Flow: 20 l/min
Pressure: 1.5 bar - 7 bar
Head: 7 m
Air operated double diaphragm pumps for dosing and transferring a wide variety of fluids. This pump is good for CIPs chlorinated cleaning agents and home industrial cleaning agents. For ...
SAMOA Industrial, S.A.
Power: 10 W
... diaphragm pump with a maximum pumped volume of 500 μl. Excellent repeated pumped volume accuracy of 1 %. The adjustable range of pumped volume per shot is 50 - 500 μl. Usage precautions for the metering ...
Flow: 0.6 us gal/h - 6.3 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C
EZ Series electronic metering pumps offer precise chemical injection at a low cost. The compact size and simple control make them ideal for water treatment and OEM applications. Key ...
Walchem
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 19, 17, 110, 62 W
IX Series Metering Pumps are digitally controlled direct-drive diaphragm pumps. Years of experience in high-end motor technology result in extremely accurate and energy efficient metering ...
Walchem
Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C
... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired ...
Walchem
Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...
NOV Inc.
AugMentor® Pump Stuffer Ensures Reliable, Positive Feeding of High-Viscosity Materials The AugMentor® Pump Stuffer handles high-viscosity materials otherwise unpumpable by conventional ...
NOV Inc.
Flow: 5 l/h - 1,250 l/h
Pressure: 0 bar - 72 bar
Fluid temperature: 0 °C - 120 °C
... of dosing pumps offering an efficient, reliable and low maintenance solution for applications where low flow, accurate dosing is required. The new Mono dosing pump ...
NOV Inc.
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 cm³/rev to 4 cm³/rev. The grading of the total of 4 nominal sizes ...
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 200 °C
The ADP is a high precision external gear metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations ...
Main features Filling range from 1ml to 1000ml Technical data All contact parts with the products are made of aisi 316L stainless steel or FDA approved materials Quick dismanting for cleaning and sanitizing Version available for cold/hot ...
Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative ...
Verder Liquids
Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 7 peristaltic pump for dosing and low flow applications Verderflex ...
Verder Liquids
Flow: 0 m³/h - 12 m³/h
Pressure: 0 bar - 16 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 45 peristaltic pump for dosing and low flow applications Verderflex ...
Verder Liquids
Power: 80 W
... the pump or external control module with a resolution of 0.1 1/min. This enables the achievement of the maximum possible pump output of piston pump heads. rotarus® fast embodies maximum ...
ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which docs not altor tho charactoristics of tho sorum graft. Equipped with remote control, ...
Flow: 3,000 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s no need for ...
MIXTRON S.R.L.
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s no need for ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s no need for ...
MIXTRON S.R.L.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.014 l/min - 0.145 l/min
Power: 8 W
Fluid temperature: 0 °C - 50 °C
... PRO2 peristaltic pump is a low-flow high-precision stepper motor peristaltic pump;This product has the following advantages: easy control, high precision;With a 21.7 * 10.8mm screen display. ★ Convenient, ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.019 l/min - 0.065 l/min
Fluid temperature: -60 °C - 200 °C
Length: 72 mm
Kamoer Super Mini Adjustable Flow Peristaltic Dosing Pump Basic Parameters Voltage: 24V,1A Tube material: Silicone Pump head: Engineering plastics Humidity: ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
... protection glass LED warning light, 2 different flow adjustment adjustable via front panel 0-20%, 0-100% manual capacity adjustment PVDF dosing head, heat and acid resistant PP outer housing PTFE ...
... glass LED warning light 2 different flow settings that can be set via the front panel 0-20% 0-100% manual capacity adjustment PVDF dosing head External and acid-resistant PP outer housing PTFE ...
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
... typical selection criteria for laboratory pumps. The LabDos® laboratory pump perfectly meets these varied requirements and is good value for money. It is thus the ideal solution for diverse applications: ...
... a tough pump can easily use the KDS 410 pump for optimum performance. It encapsulates two different modes of operation, one for dispensing and the other for withdrawal. In two fast, easy ...
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...
Bürkle
Flow: 4 l/min - 30 l/min
OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...
Bürkle
The mini solvent pump is provided with an enhanced quality hand pump, applicable for small containers like bottles, canisters and tanks with a maximum ...
Bürkle
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump ...
HNP Mikrosysteme GmbH
Flow: 1.5 l/h - 60 l/h
Pressure: 2 bar - 16 bar
Power: 32 W
DOSmart AC is a series of dosing pumps with a step motor and advanced control functions to automate precisely and efficiently the dosing of chemicals in liquid state. This series of ...
ITC
Flow: 0.1 l/min - 1.8 l/min
Pressure: 15 bar
Application(s) : Paints Specification(s) : Light weight gear pump / Robot arm design / Shaft flushing technology Fast and efficient flushing This very high precision metering gear pump ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4 Drive shaft diameter : Ø 12mm with a 4mm key Drive ...
POMTAVA SA
Flow: 0.03 l/min - 0.6 l/min
Pressure: 15 bar
... depending on the product involved Standard rotation :Clockwise rotation (A) =Input/Output :2 holes Ø 6mm on the body of the pump. Delivered with connecting block G1/4 Drive shaft diameter : Ø 12mm with a 4mm key Drive ...
POMTAVA SA
Flow: 0 l/min - 0.02 l/min
... A second PT-SP multi-syringe pump is used as the media refilling pump. It is connected to the master PT-SP pump and automatically triggered by the master pump to refill ...
Pressure: 240, 256, 320 bar
... , easy maintenance, easy and quick cleaning Our 2K piston pump with exchangeable mixing ratio. Due to the positive control and always the same switching points, you get the perfect dosing with the ...
Please specify:
Help us improve:
remaining