|
|
The diesel engines are multifuel engines able to run on crude oil (CRO), heavy fuel oil (HFO), light fuel oil (LFO), gas or gas/oil combination. The gas engines can be utilized as pump drives as well.
Wärtsilä%u2019s pump units comprise a complete train of engine, gearbox and pump on the baseframe along with the required auxiliary units. Pumps are selected according to the required pumping duty.
|
|
This is a "pump system" consisting of various components. With pumps of different sizes it pumps pulp suspensions up to a consistency of approximately 16%.
Due to the modular design, our SF - pump can operate in the entire consistency range from 0 -16 %.
|
|
Introduction:
ES series gravel pumps are horizontal and single-casing centrifugal pumps. The type ES pumps are of high -head ones.
Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high-chrome wear-resistant alloys. The discharge direction of pump can be oriented in any direction of 360. This type of pump owns the advantages of easy installation, good performance of NPSH and wear-resistance.
Application:
Gravel pumps are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids, to be pumped by common pumps. They are suitable for delivering slurries in mining, explosive -sludge in metal melting, dredging in dredger and course of rivers, and other fields.
Notation
ES(G)-8S
E:Excellence
S:Sand
G:High head
8:Discharge size (inch)
S:Frame type with maximum power
|
|
The APV PUMA+ Centrifugal Pump
The prime choice for standard duty operations
The APV PUMA is a single-stage, centrifugal pump designed specifically for standard duty applications in the food, dairy, brewery and beverage industries. Widely recognized for its low installation costs, problem-free operation, stringent hygiene standards and flexibility, the APV PUMA range comprises 3 basic pump configurations offering heads up to 7.8 bar, flow rates up to 135 m3/h, and system pressure up to 16 bar.
* Flexible Installation
* Easy Maintenance
* Reliable Components
* CIP/SIP Compatible
* All product contact parts Stainless Steel 1.4404 (AISI 316L)
* FDA Approved Elastomers
* EHEDG Approved
|
|
|
|
|
|
The APV W+ Centrifugal Pump
The most reliable pump in the world
The APV W+ pump is based on a unique hydraulic design which combines maximum efficiency with the highest hygiene standards.
Highest Hygiene Standards
* Meets the strict European hygienic standards (EHEDG)
* 3A Versions available
* Designed for both CIP (Cleaning in place) and SIP (Sterilise in place)
* FDA approved elastomers
* AISI 316L product contact parts
Exceptional Performance
* Extremely energy efficient design
* High efficiency electric motor
* Low power consumption
* Very low noise and vibration levels
Easy Maintenance
* Very easy maintenance with minimum downtime
* Easy visual inspection of shaft seal for leaks
Extensive Range
* 17 models, with capacities of 0.2 to 15 bar and 2 to 800 m3/hr
Flexible Design
* Extensive range of optional variants such as WA+ Aseptic version, multistage, WHP+ high pressure, WI+ Inducer version, WE+ Electropolished and many more..
The W+ pump with its flexible design and many variants is the proven solution for hygienic applications in industries such as Dairy, Brewery, Food, Beverage, Pharmaceutical, Personal Care and Chemical.
|
|
|
|
|
|
The APV Ws+ Self Priming Pump
Patented, revolutionary pump.
The APV Ws+ pump is based on a unique technology applied exclusively by APV, showing substantial improvements over traditionally designed self-priming pumps.
The Ws+ pump works according to the water ring principle. However unlike traditional self-priming pumps, the WS+ is equipped with an open impeller ensuring a flexible flow range and enabling you to choose a small pump for your task. The self priming effect is obtained by means of an air screw mounted on the pump inlet.
Highest Hygiene Standards
* Meets the strict European hygienic standards (EHEDG)
* 3A Versions available
* Designed for both CIP (Cleaning in place) and SIP (Sterilise in place)
* FDA approved elastomers
* AISI 316L product contact parts
Exceptional Performance
* The Ws+ is equally suitable as a CIP and product pump
* Extremely energy efficient design
* High efficiency electric motor
* Low power consumption
* Very low noise and vibration levels
* Particle friendly design due to open impeller
Easy Maintenance
* Very easy maintenance with minimum downtime
* Easy visual inspection of shaft seal for leaks
The Ws+ pump has been installed in numerous applications all over the world and proven successful in many industries and applications:
Dairies * Breweries * Butter plants * Cheese factories * Wineries * Distilleries * Food factories * Egg plants * Enzymes production * Colourings * Bio-pharma
|
|
TOP-FLO® C-Series pump dolly or cart has an emphasis on your convenience. It's mobility will allow you to find many functions in your manufacturing process.
Standard features are as follows:
Universal dolly for C100, C114, C216, C218 & C328 pumps with motors through 10 horsepower
Full 304 stainless steel construction with 2 fixed wheels
Bead blast finish
8.0" semi-pneumatic wheels
Adjustable pivot point axle
Handle mounted cord wrap
Optional features are as follows:
Finishes- mechanical polish, electropolish
Full range of control options- VFD, start/stop controls, network controls
Wheels-4 wheels, non-marking white wheels, full pneumatic, solid
Special customer design requirements
Designed for your convenience
Can be designed & manufactured to your specifications
Convenient roll-away design
Mobililty allows you to find many functions in your manufacturing process
Durable (full 304 stainless steel construction)
|
|
Specifically designed for re-circulating service in reverse osmosis and other membrane systems. Equipped with balanced double shaft seal with buffer fluid ports on top and bottom for complete removal of air/vapor from seal chamber.
- Rated up to 700 psi maximum pump casing pressure (at
discharge)
- Maximum differential pressure 150 psi (based on water)
- Sanitary construction for food and dairy processing
service
- Large, long-life bearings with non-wearing labyrinth seals
- 316L stainless steel impeller and shaft; 17-4PH stainless
steel casing
- Motor flange adapter reduces coupling wear
|
|
The ToP-Flo® name represents the finest in sanitary process equipment. ToP-Flo® pumps have been designed to offer efficient transfer of product over a wide range of head and viscosity conditions. ToP-Flo® pumps are easy to install, clean, and operate.
ToP-Flo® pumps are suitable for use in CIP (clean in place) installations. This feature enables easy self-cleaning with no dismantling or take-down. Sanitizing of all product contact areas is automatic.
All ToP-Flo® pumps are available in standard inlet sizes and outlet sizes. In addition, enlarged inlet sizes are available for special applications.
|
|
Designed for heavy-duty, high-efficiency applications. Provides exceptional corrosion resistance. Impeller and shaft are one piece, which connects directly to motor shaft; eliminating such problems as vibration, short bearing life, high NPSH requirements, high seal maintenance, poor tolerance, and adverse operating conditions.
- 316L stainless steel volute, backplate, impeller and shaft
- Five-bladed impeller with deeper eye for improved inlet
characteristics
- Modular seal design - one size fits all models
- Wide range of seal options, including standard
commercial seals
-Stronge JM-type motor with large bearings and strong
shaft
- Base mounting options available with all sizes
- Temperature range of fluids up to 450° F.
|
|
Designed for re-circulating service in reverse osmosis and other membrane systems, the 200MS Series multistage pumps offer lower start-up and run costs due to the high efficiency, two impeller design. These pumps produce a smooth, constant flow rate that reduces RO membrane fouling. They include many of the features of the 200 Series pumps, including strong investment cast impellers, low NPSH requirements and tighter running clearances.
- Rated up to 1250 psi maximum pump casing pressure
when pumps are placed in series
- Maximum differential pressure 250 psi (based on water)
- Sanitary 3A construction for food and dairy processing;
wet ends 316L stainless steel
- Low NPSHR investment cast impeller features 5 bladed,
open design for easy CIP and gentle product handling
- Heavy duty cast iron bearing frame keeps shaft rigid and
concentric for long seal and bearing life
-Balanced, water flush, double shaft seal standard
|
|
|
Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures. With more than 70 years in the Centrifugal Pump business, Johnson Pump offers several series of centrifugal pumps, many of which comply with ISO, DIN and API standards.
|
|
Single-stage volute and double volute casing punps with dimensions to EN 733/DIN 24255 + meet the technical requirements of ISO 9908 and ISO 5199/EN 25199. In additions some designs meet EN22858/DIN 24256.
PERFORMANCE
• Capacity - max. 1800 m3/h
• Head - max.140m
• Speed - max. 3600 rpm
• Casing pressures - max. 40 bar
• Temperatures - max. + 400 °C
• Temperatures - min. - 40 °C
50 hydraulic sizes with closed impellers up to a transnorm size of 300 - 500.
• General Purpose Pumps
• Hot Water Pumps
• Thermal Oil Pumps
FEATURES
• Modular design
• Shaft deflection complies with ISO 5199
• High efficiency
• Low NPSH
• Interchangeable components
• Global service network
• SuperNova family
• Complies with "ATEX" legislation
|
|
|
|
|
|
PERFORMANCE
Capacity:- 650 m3/h max
Head:- 150m max
Speed:- 3600 rpm max
Casing Pressure:- PN 16
Temperature:- 350 °C max
Sterling SIHI volute casing pumps are used in a wide variety of process applications and due to their high reliability they provide reduced operating costs in the Process industry.
The differant volute casing pump applications require specific methods of shaft sealing including single or double acting mechanical seals or seallless designs.
• ISO 5199 / EN 25199 and ISO 2858 / EN 22858
• Interchangeability of back pull-out assemblies
• Temperatures up to 400 °C without external cooling
• Casing pressures up to 40 bar
• Special materials (Hastelloy, Titanium,…)
• Heated Jackets
• Modulare Design – reduced spare parts costs
• Mechanical seal arraqngements
• Magnetic coupling arrangements
Bare shaft back pull-out assemblies
CBSD
Pumps with a single or double acting mechanical seal and oil or grease lubricated ball bearings.
CBMD
Pumps with a magnetic coupling according to VDMA 24279
Close-coupled back pull-out assemblies
CBED
Pumps with a magnetic coupling to VDMA 24279
|
|
HOT WATER 100 - 160 °C UNCOOLED
ZLN - Standard hot water pump
Up to temperatures of 160 °C - EN 733/ DIN 24255, can be used with an uncooled, balanced mechanical seal.
ZLI - Inline hot water pump
Up to temperatures of 150 °C and is of an economical inline design
HOT WATER 160 - 230 °C UNCOOLED
ZEN / ZDN - hot water pumps
The ZEN, a volute casing to EN 22858, & the mechanical seal has been placed at the “cold end“/drive end, of the pump and can operate up to 230 °C.
HEAT TRANSFER OIL 100 - 350 °C UNCOOLED
ZTK and ZTI - Compact design thermal oil pumps
Specially developed for installation in compact machinery. The series only differ from each other in the shape of the pump casing.
ZTN -Thermal oil pump
For handling thermal oil up to 350 °C in the heating
prosesses.
ZTK - magnetic drive
Up to 300 °C uncooled
ZTK - magnetic drive
With a heat barrier up to 400 °C – uncooled
|
|
• Centre-line mounted end-suction pump overhung single stage process pump
•Atex certification
•Design requirements according to API 610
•Robust shaft design
•Seal chamber to API 682
•Extended life time
•Pump casing and cover metal-to-metal fit with fully fully confined, controlled compression spiral wound gasket
•2 angular contact thrust bearings and cylindrical roller bearing
•Fully integrated design – pump, motor, base plate, and accessories
•Oil bath lubricated bearings
•Outstanding hydraulic performance
•Bearing housing cooling optional
•High efficiency impeller
•Easy maintenance through the Back-Pull-Out principle
•Closed impeller or half open impeller with wear plate and external adjustment
•Renewable wear rings for casing and impeller
•Dynamically balanced impeller
• Magnetic drive version according to API 685 optional
|
|
A range of stainless steel hygienic pumps - TopClean.
TopClean CS (including CS, CSK, CSX)
A range of hygienic centrifugal pumps comprising 26 modular sizes with a flow rate of up to 575 m3/h and a max head of 100 m.
TopClean CSA
A range of hygienic centrifugal pumps according to EHEDG and 3A standards comprising 21 modular sizes with a flow rate of up to 325 m3/h and a max head of 100 m.
TopClean AS
A range of hygienic, self priming liquid ring pumps comprising 7 modular sizes with a flow rate of up to 55 m3/h and a max head of 40 m.
|
|
Suitable for applications where the flow required varies continuously or the pump operates against a closed discharge valve.
MODEL :- CWHA
Capacity:- 90 m3/h - 400 USgpm
Delivery head max:- 1900 m - 6300ft
Max speed:- 6800 rpm
Casing pressure:- 160 bar - 2320 psig
Lubrication :- oil
MODEL :- CWHG
Capacity:- 80m3/h - 350 USgpm
Delivery head max:- 780m / 2575ft
Max speed:- 4300 rpm
Casing pressure:- 85 bar - 1230 psig
Lubrication :- grease
FEATURES
- Wide operating range up and down the performance curve
- Complies with API 8th edition
- Complies with ATEX
- Pulsation free operation
- Seal only on suction side
- No contact between pumped medium and pump lubricant
- Ability to handle solids and gases
- Dry running capability
BENEFITS
- Handles wide variations in flow (from 20% to 110% of
BEP flow)
- Wide application in oil extraction and oil processing
- Suitable for Category 2
- Extended MTBF
|
|
|
The Johnson Pump range of magnetic drive centrifugal pumps has no seals and is therefore leak proof. This makes the pumps ideal for transporting aggressive, dangerous and valuable fluids. Because of more stringent environmental requirements and ever more advanced manufacturing process, there is increase in interest in this type of pump.
|
|
|
|
|
|
For more than 25 years Sterling SIHI have been supplying pumps with magentic couplings for demanding applications in the process industry.
It´s experience in the field of magnetic couplings enables Sterling SIHI to use hermetically sealed drivers for the complete programme of liquid pumps.
PERFORMANCE (for leak free magnetic couplings):-
• Power rarting from 2 to 115 kW
• Temperature range from -40 °C to +400 °C
• Manufactured to ISO 5199 and VDMA 24279
PROCESS PUMPS WITH MAGNETIC COUPLINGS
Performance data
• Capacitiy: max. 650 m3/h
• Delivery head: max. 150 m
• Temperature: max. 300 °C uncooled
SIDE CHANNEL PUMPS WITH MAGNETIC COUPLINGS Performance data
• Capacity: max. 35 m3/h
• Delivery head: max. 354 m
• Temperature: max. 180 °C uncooled
PUMPS FOR HOT LIQUIDS WITH MAGNETIC COUPLINGS
Performance data
• Capacity: max. 600 m3/h
• Delivery head: max. 90 m
• Temperature: max. 400 °C uncooled
SPECIAL DESIGNS WITH MAGNETIC COUPLINGS
Sterling SIHI has 25 years experience in the design of pumps with magnetic couplings for special applications.
|
|
|
The range of multistage pumps includes a series of horizontal pump, MCH, and a range of vertical pump, MCV. The horizontal types can also be supplied in a self-priming version, MCHZ.
|
|
|
|
|
|
The MSL, MSM and MSV range the axial thrust is balanced by a newly designed and patented drum system that does not need tight, wear-sensitive running clearances to efficiently control re-circulation flow in the balance line.
The MSM range is designed for high pressure applications and the axial thrust is balanced by the combination of the drum and disc.
PERFORMANCE
• Capacity - max. 250 m3/h
• Head - max. 630 m
• Speed - max. 3600 rpm
• Temperature -10°C to 180°C (Optional 200°C )
• Pressure rating - max. 63 bar
The SIHI Multi range have optional design features available including: various nozzle positions, choice of shaft sealings, a stage reduction capability, a balance disc lift- off capability and inboard and outbord anti-friction bearings.
MORE ... FOR LESS ...
• Reduced life-cycle costs
- enhanced efficiency & innovative axial thrust balancing
- only one shaft seal
- lower power consumption
- high reliability
• Ease of maintenance
- simple dismantling and assembly
- meets technical requirements of ISO 5199 / EN 25199
• Minimised wear
- reduced usage of spare parts costs
• Global service network
- established local Service Centres around the world
|
|
FreFlow - Suitable for contaminated liquids, as well liquids containing air or gas, for sumps and gullies and many other applications where a suction lift is required
CombiPrime - Suitable for low viscosity, clean liquids when self-priming is required
|
|
This extensive range of side-channel pumps are available in various designs including:- Horizontal or vertical, self-priming and some of a segmental construction.
The pumps are able to handle entrained gases and liquids which in some cases contain solid or abrasive matter.
PERFORMANCE
- capacity up to 35 m3/h.
- delivery head up to 354 m
FEATURES & BENEFITS
- self –priming.
- gas handling.
- performance curve characteristics.
- pumping liquids under critical physical
- high wear-resitant materials
- high efficiency
- low NPSHR value
- modular hydraulic system
|
|
•Can handle solids
•Vortex technology
•Prevent clogging
•Standardized and modular design
•Flanges according to ISO 7005 PN 16
•Available in horizontal and vertical execution
•Self-priming option available
•Atex certification
•Handle liquids with varying amounts of gas
•Impeller with back vanes providing solids kept away from shaft sealing area
•Easy maintenance through the Back-Pull-Out principle
•Single unbalanced mechanical seals to EN 12756 (DIN 24960)
•Quenched shaft sealing
•Gland packing
•Dry-shaft design, pumped liquid not in contact with the shaft
•Robust shaft design
•Extended life time
•Double row angular contact thrust bearing and cylindrical roller bearing
•Grease or oil bath lubricated bearings
•In vertical execution many mounting options (floor, bulkhead)
• In vertical execution eight positions possible between suction and delivery connections
|
|
CombiDirt
Robust centrifugal pump for liquids containing solids
Features
•Can handle solids
•Vortex technology
•Prevent clogging
•Easy maintenance (Back Pull Out execution)
•Handle liquids with varying amounts of gas
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
Honda High Pressure pumps offer high pressure with lower flow. The best applications for these water pumps are where higher pressure is required, such as when using sprinklers or a nozzle.
WH15
This high pressure pump is powered by the GX120 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
WH20
This high pressure pump is powered by the GX160 Industrial Engine. This pump offers exceptional performance when higher pressure is required in applications such as using sprinklers or a nozzle.
|
|
|
|
see the results for the following category : 
