|
|
Many customer requests and special applications require non-contact temperature measurement solutions which challenge IMPAC beyond the conventional. As a consequence IMPAC has developed numerous special pyrometers, optimized for the specific demands of a wide range of industries and applications.
Examples are:
- Pyrometer series’ using two-colour technology (ratio pyrometers) for hostile environments.
- Pyrometers for the measurement on special materials (e.g. aluminium (IS 12-AL), flame measurement (IPE 140/45), glass, measurement in coking plants (IS 8-K plus), PE and PP foils (IPE 140/34), silicon (IS 12-Si), etc.).
- Pyrometers to measure a pouring stream of metals or alloys (IS 8 GS plus, ISR 12-LO/GS).
- Pyrometers with an integrated scanner to detect anomalies.
- Pyrometers with automatic calculation and correction of the emissivity (Quantum I, Mikron Infrared).
-Temperature switches (for fast hot object detection to trigger a process).
IMPAC also offers the development of customer specific instruments on request.
For detailed Information please see:
Pyrometers IMPAC
www.impacinfrared.com/EN/products/pyrometer/pyrometer.html
Pyrometers Mikron
www.mikroninfrared.com/products/Products-s1-process.htm
|
|
Non-contact temperature measurement is a standard technology in industrial manufacturing and in engineering processes. In glass manufacturing, metal working or food production, accurate temperature measurement is the crucial dimension to be considered during processing and monitoring.
IMPAC Infrared offers a broad variety of pyrometers – including the products of Mikron Infrared Inc., USA. – covering nearly all applications. The use of the correct device essentially depends on the material of the object to be measured, the expected temperature range and the mechanical conditions.
For detailed information please see:
Pyrometer overview IMPAC
www.impacinfrared.com/EN/products/pyrometer/pyrometer.html
Pyrometer overview Mikron
www.mikroninfrared.com/products/Products-s1-process.htm
|
|
For extremely fast applications (up to 5 µs) IMPAC offers pyrometers of the KLEIBER High Speed Line and consequently can provide solutions for applications dealing with fastest processes. KLEIBER pyrometers feature the same excellent technical properties as IMPAC standard pyrometers, but with much shorter response times.
These pyrometers are typically used in the field of laser applications and in material research and development.
Moreover IMPAC offers measuring stations from KLEIBER. These contain a power supply, a digital display and a pyrometer. PID-controllers can also be integrated as an option.
An example for such a measuring station is the KS 740 HS-USB which features fastest response times with an online USB data transfer to a PC (including the needed analysis software).
For detailed information please see:
www.impacinfrared.com/EN/products/pyrometer/kleiber-highspeed.html
respectively:
www.kleiberinfrared.de
|
|
Intrinsically safe Non-Contact Temperature Meters Ex-MX2 / Ex-MX4 BT
Intrinsically-Safe Non-Contact Temperature Meter Ex-MP4
Handheld Infrared Thermometers 63, 66, 68
|
|
Portable infrared pyrometers are battery driven portables for non-contact temperature measurement. Depending on the material of the measuring object and the expected temperature range, IMPAC Infrared offers the following products:
Series IN 14 and IN 15: Measurement on non-metallic surfaces or coated, painted or anodized metals from -32 to 900°C.
IGA 15 plus: Measurement on metals, ceramics, graphite etc. from 250 to 1800°C.
Series 15/5: Measurement on glass surfaces from 150 to 1800°C.
Series 8: Very fast (1ms) measurement on metals of glass surfaces from 600 to 2500°C. Special versions for the measurement of pouring streams or for measurements in coking plants are available.
Mikron Series M90: Full blown product family including e.g. ratio pyrometer versions for various applications.
For detailed Information please see:
Portable pyrometers IMPAC:
www.impacinfrared.com/EN/products/pyrometer/portables.html
Portable pyrometers Mikron
www.www.mikroninfrared.com/products/Products-s7-portables.htm
|
|
Mikron’s lines of E²T infrared thermometers provide reliable temperature measurement in the Petrochemical Industries. The offered product series’ are each designed for special applications in this area.
The Pulsar II series is designed for temperature measurements of High Temperature, Sulphur Recovery and Sulphur Burning Furnaces. These instruments measure the temperature of gas, refractory or a combination of both temperatures.
The Quasar line of products is designed for continuous Flare Stack Monitoring of Pilots, Flaring and Smoke. They suit for a monitoring distance of up to 400 m.
Both systems are CSA, CENELEC and ATEX certified for hazardous areas.
|
|
Small programmable compact Infrared temperature measurement instrument for manifold industrial applications with a very short response time and a minimal measuring spot of only 7 mm.
Features:
- 2 Outputs (V, mA, Thermelement J, K) for sensor and object temperatures
- Programmable Temperature Measurement Instrument
- Small dimensions of the infrared sensing head -
- separate sensing head and electronics
- Ambient temperature sensing head -20°C...+180°C
- Output programmable (mA, V, Thermocouple J, K)
- LCD Display
- Programming keys for parameter adjustment
- Spectral range of 8 - 14 µm for general measurement tasks in the range of
- -40°C...+900°C
- Measuring range, emissivity, transmissivity adjustable
- MIN, MAX, mean values and HOLD feature adjustable
- Reduction of the measurement spot with the aid of focussing optics
See more information in our shop:
***www.temperature-shop.de***
|
|
The IR-CA Product Line of Non-Contact Infrared Thermometers provides broad selection of units to match your applications and requirements for non-contact temperature measurement. The product line consists of 15 different Series grouped into General Purpose and Application Specific models.
Low Temperature – Long Wavelength: IR-CAB
Low Temperature – Short Wavelength: IR-CAE
Low to Medium Temperature and Small Spot Size: IR-CAP
Medium Temperature – Wide Temperature Range: IR-CAI
High Temperature – Wide Temperature Range: IR-CAS
Multi-Wavelength – Multi-Function: IR-CAQ
World’s Widest Temperature Range Infrared Thermometer: IR-CAW
Polyester Film: IR-CAN
Polyethylene Film: IR-CAM
Measurement Inside of Furnace: IR-CAR
Glass Temperature: IR-CAG
Semicon/Silicon: IR-CAT
Semicon/InGaAs: IR-CAU
Food Industry: IR-CAFX
|
|
B&B Thermo-Technik GmbH offers Infrared Thermometers for various applications:
- a simple and favourable Infrared Thermometer FlashBeam 8869
for 56,- Euro net (price 2006)
with Laserpointer
Measuring range: -20°C to +420°C
Response time: 500 ms
Resolution: 1°C
Distance Spot ratio: 8 : 1
- Favourable Infrared Thermometer Flashbeam 8866
with laserpointer
with emissivity selectable
with many features
- Infrared Thermometers especially developed for the temperature control
of food
- Infrared Thermometer with RS232 Interface
and many features
Please find further information in our Temperature Shop:
www.temperature-shop.eu
In the Temperature-Shop you will also find information about our range of:
- Temperature Probes
- Temperature Humidity Sensors
- Thermocouple Connectors
- Temperature Measurement Instruments
- Infrared Thermometers
- Hygrometers
- Data loggers
- Recorders
- Stationary Pyrometers
- Controllers
- Indicators
- Transmitters
|
|
Raytek has introduced the new Raytek XR infrared (IR) thermometer. Designed to optimize continuous temperature monitoring in a broad range of manufacturing processes, this advanced sensor is a rugged, IP65 sealed single-piece system with the flexibility to handle almost any application. The Raytek XR thermometer combines a host of best-in-class features, including multiple extended temperature ranges, precision temperature resolution, RS-485 outputs and a versatile electronics platform. The sensor provides a flexible, user-defined analog output that can be matched with almost any existing control system. An intuitive local user interface simplifies system setup and configuration, and adds powerful troubleshooting capabilities. The Raytek XR thermometers, with multiple measurement ranges, utilize identical, configurable installation hardware and application software. Users have the freedom to choose the easiest or best means of wiring the sensor for a given application. In addition, standard RS485 communications enables remote configuration—streamlining troubleshooting and data acquisition.
Industries and processes for the use of the Raytek XR pyrometer are:
· Glass Surface Temperature Measurement
· Plastics Processing
· Printing, Paper, Textile
· Construction Materials
· Hot Metal Detection
|
|
Raytek presents the Marathon MM 3M, a new IR-pyrometer to measure low-to-medium temperatures (100 to 600°C) with more accuracy regardless of changing emissivity. This innovative sensor was specifically designed to meet temperature measurement challenges in the metals processing industry. It utilizes shorter infrared wavelengths (2.3 µm) in order to minimize errors due to the uncertainty of emissivity. The new thermometer is not as sensitive to changes in emissivity on the target material as long wavelength sensors, and as such, provides more accurate readings across varying targets, at varying temperatures. The Marathon MM 3M features an IP 65 sealed user interface and precision variable focus optics. The precision variable focus optics allows the sensor to be accurately focused with just a touch of a button, while the sealed user interface guarantees the integrity of the electronics. The Marathon MM3M pyrometer provides all of the advantages of this advanced sensor platform, including enhanced continuous remote temperature monitoring, ease of installation and sighting, video surveillance and documentation, remote PC interface, flexible configuration, and field calibration software.
|
|
• Temperature range: 250 to 3000 °C (several models)
• High accuracy
• Optical resolution up to 100:1
• Focus distances down to 100 mm
• Response time down to 10 ms
• Fiber optic assembly withstands 200°C, IP65 rated
• 0/4 - 20 mA analog output
• RS485 serial output; networkable (up to 32 sensors)
• Advanced signal processing
• Background radiation compensation
• Programmable relay output: dual temperature setpoints …
• software for remote configuration and monitoring
|
|
MM series
Raytek announces the addition of a motorised, remotely-controlled variable target focus capability to its Marathon MM Series. This new feature provides OEMs and production engineers the flexibility of needing only one sensor type for multiple sensor applications. This ready-to-use solution greatly reduces the requirement for replacement sensors stock, resulting in considerable cost savings. Users can easily adjust the focus of measurement targets, either on the rear of the instrument, or from a PC where adjustments can be seen real-time on video. The sensor is sealed according to IP 65 standards. All of the sensors provide integrated through-the-lens sighting, plus either laser or video sighting for correct aiming. The MM Series also provides real-time video monitoring, image capture and storage capabilities. This unique optional feature enables engineers to continuously observe and record temperature variations in their process. The MM Series platform covers a temperature range of - 40 to 3000°C and consists of 5 sensor models. All sensors feature identical hardware and include Raytek DataTemp Multidrop software to enable easy and consistent installation and remote configuration of multiple networked sensors. A complete range of accessories is available for MM sensors.
|
|
IMPAC Infrared provides numerous mechanical and electrical accessories for its products.
Mechanical accessories e.g. contain:
• Cooling jackets
• Mounting devices
• Flange systems
• Laser aiming lights
• Air purge units
• Emissivity enhancer for low temperature metal measurement and aluminium
• Continuous casting measurement system
Electrical Accessories e.g. contain:
• Power supplies
• Indicators
• Converters
• Protocol converters
• Portable terminals
A comprehensive software package for various industries is also offered to customers.
For detailed information please see:
www.impacinfrared.com/EN/products/accessories/accessories.html
|
|
IST-QUADTEK® M554 Spyrometer3
The IST-Quadtek® Spyrometer3, with its patented combination
of a color video camera and a scanning pyrometer,
gives the operator the ability to see process conditions
while measuring the temperature of virtually any area in the
field of view. The M554 imaging pyrometer takes the video
image and the temperature information, multiplexes it and
sends it, via coaxial cable, to the image processor in the
control room and displays it on a VGA monitor. Onscreen
temperature measurement data is also accessible through
4-20mA outputs which can easily be interfaced to your
control system.
|
|
Blackbodies are reference sources used for testing infrared systems. They are required in industry for calibration of pyrometers, infrared line scanners or cameras.
In Defence, they are part of benches for characterisation of complex optronic systems. HGH offers a wide range of blackbodies to cover all Customers’ needs:
- DCN 1000N Differential blackbody for characterization of infrared system performances
- RCN High temperature cavity blackbody for calibration of infrared sensors
- ECN 100 Extended area blackbody for field tests and calibration without collimator
- DCN 1000L Low temperature blackbody
- DCN 1000N Vacuum cryogenic temperature blackbody for space borne systems testing
In addition, HGH have the ability to design specific infrared sources on request.
In many cases, blackbodies are associated to test targets/target wheels and incorporated into infrared collimators (IRCOL).
Contact us with your specifications.
|
|
| ... products without technical information |
| |
|
|
