Probes

FLS C6.30 is a family of inductive conductivity transmitters which are made by a 4-20mA output device (two wire technology) integrated onto an inductive conductivity sensor. This type of measurement technology allows a broad range of applications especially ...

... FLS conductivity sensors with stainless steel electrodes (C100 series) are designed for agriculture application and for light industrial application obviously where sample conditions allow a steel using (water treatment, foods industry and others). This ...

... This FLS line of electrodes has been designed to provide a cost effective multipurpose solution for in line or submersion measurement of pH and ORP in a wide range of applications. Single and double junction versions are available as well as models with ...

... Robust and virtually maintenance-free single-parameter sensor (SPS) for measuring nitrate (NO3-, NO3-N) Slim design (Ø 48.3 mm) for observation wells with minimum 3“diameter High measuring accuracy, drift-free Available in different measuring ranges ...

... New - Sound intensity probe SIS 190 double New - Measurement of sound intensity in a very wide frequency range The sound intensity probe SIS 190 double allows a simultaneous sound intensity measurement in a very large frequency range. For this purpose ...

... The sound intensity probe SIS 194 3D 1/4" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes is formed, thus all three axes ...

... The sound intensity probe SIS 194 3D 1/2" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes is formed, thus all three axes ...

... Screw-in sensor series for flow measurement, monitoring or detection Corrosion-proof stainless steel housing Cable or connector design Assemble in T-piece or welding sleeve for flow monitoring in confined spaces For connection to an amplifier with ...

... Mounting in zone 0 (gas) Mounting in partition wall zone 0 / zone 1 (gas) Compact design ...

... With this tool, we can ensure refined precision as well as a high execution speed. This device is comprised of a generator that feeds the ultrasonic pencil probe as well as the sonotrode for the work to be done. Description The low weight of the ...

... Product description
The mobile measuring solution for creating depth profiles of soil moisture and temperature. Designed for use in combination with TRIME PICO and SONO probes; provides RS485 output for integration with data loggers and control ...

The high-precision multi-parameter probes of the 36XW-CTD series measure the conductivity, temperature as well as the depth (pressure) of water bodies. Temperature dependencies and non-linearity are precisely compensated for by means of a mathematical ...

The high precision 36XiW-CTD series multi-parameter probes measure the conductivity, temperature and depth (pressure) of water bodies. Temperature dependencies and nonlinearity are precisely compensated by means of a mathematical model in the microcontroller. ...

The measurement principle of the SOMQUALITY-NTU turbidity sensor is based on infrared light scatter at an angle of 90°. Thanks to the measurementat a wavelength of 880 nm and the wide detection range of 0 to 4'000 NTU, the sensor can be used in varous ...

... Temperature PT100 probes are devices supplying, through a physical process, temperature measurement to the instruments to which they are connected. These products can be used also in particularly heavy industrial application. Head: - Painted die-cast ...

... Laser sensor is designed for non-contact measurement of geometric parameters of holes (diameter, ovality, roundness). • Diameter of the laser sensor body, mm: 8.5; 15 • Range of controlled diameters, mm: 9.2...19; 16...48 • Laser sensor linearity, ...

... Configure the SMARPROBE to your exact needs. You are interested in a SMARPROBE system but haven't found the exact configuration that you need? No problem, all systems can be customized and extended according to your exact specification and budget. ...

Thanks to its fully closed-loop controlled motion system, the SMARPROBE enables positioning with unmatched repeatability and stability – even at the nanometer scale. This eliminates drift, manual correction and guesswork during probing, making complex ...

... The ultimate motion-system with low drift and extended scan-range. The SMARPROBE LX was developed to take nanometer-resolved closed-loop probing to the next level. To further minimize the effects of thermal drift and vibrations on your nano-probing ...

... Design of the 3D-finder The housing of the 3D measuring probe is made of stainless steel and shows a lasered logo of the manufacturer. A plastic ring is embedded in the housing of the 3D-finder, which is equipped with RGB light. When you put the probe ...

The Micsig CP2100B is a high-performance AC/DC current probe belonging to the Micsig CP2100 series AC DC current probe family. This CP2100B current probe features an impressive bandwidth of DC~2.5MHz, making it a powerful 2.5MHz current probe suitable ...

The Micsig CP503B is a high-performance high frequency AC DC current probe designed for precise current signal analysis across a wide range of applications. As part of the Micsig precision current probe lineup, this 50MHz current probe delivers exceptional ...

The DP701 differential probe is a high-performance member of the Micsig DP series high-voltage differential probe, designed to meet diverse high-voltage testing demands. As part of the renowned DP series, it shares the series' advanced features and is ...

Insertion length: 120 mm - 425 mm

... Product overview
EXcell 231 is a digital NIR absorption probe for in-line monitoring of biotech, food and pharmaceutical production processes. It features a standardized 12 mm stainless steel shaft, wear-free sapphire measurement windows ...

Inside Diameter Air Probe Mainly used for through hole measurements, the PA is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 8 to 20 mm from the tip of the probe.

Inside Diameter Air Probe Mainly used for through hole measurements, the PB is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 3 to 4 mm from the tip of the probe.

Inside Diameter Air Probe Mainly used for through hole measurements, the PC is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 2 mm from the tip of the probe. It is capable of making deeper measurements ...

It is used to continuously monitor and control the conductivity value/TDS value and temperature value of the aqueous solution. Widely used in power plants, petrochemicals, metallurgy, paper industry, environmental protection water treatment, light industry ...

... Product overview
Ami Polymer Pvt Ltd bellow probe assembly is designed to address the needs of the single-use disposable and biopharmaceutical industries. The bellow probe enables insertion of pH and DO probes and aseptic connection to single-use ...

... 3 Channel, 1000:1 High Precision Voltage Attenuators - Input: 3x 4mm Safety plug, touch protected along IEC/EN 61010-1, - 1x 4 mm plug protective GND - Attenuation: 1000 : 1 - Zin: 20 MOhm, 12 pF - Vmax: 1000V Cat. III - 5kV test voltage - Accuracy ...

... Conductivity probes are used to manage liquid levels inside automatic tanks. The classic applications of liquid level management in a tank are represented by the presence of two probes: one signals the minimum level, the other controls the maximum level. These ...

Measuring range: -60 °C - 60 °C

... The exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important. Te dewpoint transmitter HLX371 with a measuring range -60...60°C Td (-76...140°F Td) is ...