{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
The ISQ Series - Inverter Power Supply is designed to be used in combination with mechanical, pneumatical or motorised weld heads. It offers process control monitoring with MG3 and with the AWS3 Active Welding System. The AWS3 integrates ...
AMADA WELD TECH GmbH
Current: 5 A - 1,000 A
- The DC1013-T and DC613-T are high-performance 1000 amp precision Linear DC spot welding power supplies that combine touch-panel integrated database process control and monitoring with a high-accuracy, zero-ripple linear transistor ...
AMADA WELD TECH GmbH
High Frequency Inverter Spot Welding Power Supply - HF27, HF25 The controls found on the HF25 series closed loop welders address the challenges of micro joining. Miniature welds are highly sensitive to small heat profile fluctuations ...
AMADA WELD TECH GmbH
Power: 244, 85, 122 W
Input voltage: 24 V - 480 V
Output voltage: 29.5 V - 31.6 V
Particularly space-saving design Low heating of the control cabinet High power reserves Low inrush current Safe switch-off by circuit breakers in case of short circuit
ifm electronic
Correct mounting possible without an expensive torque wrench Mechanical end stop to protect the O-ring from destruction High shock and vibration resistance Materials for different application requirements
ifm electronic
Power: 134 W
Input voltage: 24 V
Output voltage: 30.5 V
Reliably power supply for modules, sensors and actuators High noise immunity and sufficient power reserves for the compensation of current peaks Safe decoupling of interferences from the primary supply Particularly space-saving ...
ifm electronic
Power: 120 W
Input voltage: 100 V - 240 V
Output voltage: 24 V - 28 V
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The CP-Series is part of the DIMENSION power supply family. The CP5.241 power supplies come with three connection terminal ...
PULS GmbH
With the junction systems you can bundle several sensor signals or distribute actuator signals. 2-way splitters are available in the designs M8 x 1, M12 x 1 and 7/8". Passive 4 / 8-way junction boxes are available in the designs M8 x ...
Input voltage: 230 V - 480 V
Output voltage: 24 V
Current: 5, 20, 10, 2.5 A
The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on ...
Input voltage: 230 V
Output voltage: 24 V
Current: 7.6, 2, 8, 3.8 A
The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. The devices bypass short power drops of maximally 50 independently. In addition, no-load and short-circuit protection as well as the passive air ...
The BITE 2 and BITE 2P Battery Impedance Test Equipment determine the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/Fail calculations based on a user-entered ...
MEGGER
Determines health of lead-acid cells up to 2000 Ah On-line testing with Pass/Warning/Fail calculations Measures impedance, interconnection resistance and cell voltage Windows CE operating system with 32 MB of memory Measures ...
MEGGER
Elliptical clamp shape improves access to earth cables and straps up to 50 mm Low maintenance flat jaw interface Measures ground resistance from 0.05 Ω to 1500 Ω Measures true RMS ground leakage current from 0.5 mA rms to 35 ...
MEGGER
Fluke is offering a free extended warranty to anyone who registers a new T110, T130 or T150 before December 31, 2019, increasing the warranty from 2 to 3 years for free, a £40 value. Register here Redesigned cable assembly for superb ...
FLUKE
Power: 375 W
Input voltage: 100, 230, 115 V
Output voltage: 0 V - 60 V
Variable DC Power Supply With Triple Outputs The U8030 Series consists of variable DC power supply products with a total output of 375 W – making them an ideal power source in the design and manufacturing of electronic devices. The ...
KEYSIGHT TECHNOLOGIES
The MY600 Digital Insulation Tester has enhanced operation compared to the conventional model, by using a shortened measurement time and color indicating judging function. This is a new concept in insulation testing and includes enhanced ...
YOKOGAWA Europe
Power: 60 W
Output voltage: 0 V - 110 V
Current: 0 A - 3.2 A
The GS610 is a highly accurate and highly functional programmable voltage/current source that incorporates voltage/current generation and measurement functions. The maximum output voltage and current are 110 V and 3.2 A, respectively. ...
YOKOGAWA Europe
Output voltage: 7 V - 50 V
Current: 0.6 A - 3.2 A
The GS820 expands upon the conventional source measure unit technology by featuring two channels of four quadrant operation. Each channel is isolated from one another and comes armed with a voltmeter, ammeter, voltage source and current ...
YOKOGAWA Europe
Ideal for preventive maintenance, the C.A 6630 battery capacity tester fits comfortably in one hand. It is simple to use and allows measurement of the internal resistance and open-circuit voltage. It can test the following types of ...
Power: 2,000 W - 3,000 W
Input voltage: 190 V - 250 V
Output voltage: 300 V
The 9830 Series programmable AC power sources provide high performance and low total harmonic distortion in a 3U form factor. The addition of positive and negative DC offset voltages expands the AC capabilities to operate in DC and AC+DC ...
B&K Precision
Power: 5,000 W
Input voltage: 170 V - 265 V
Output voltage: 0 V - 1,000 V
The PVS10005, PVS60085, and PVS60085MR programmable DC power supplies offer clean output power up to 5.1 kW, excellent regulation, and fast transient response time characteristics in an industry-leading 2U package. These power supplies ...
B&K Precision
Power: 3,000 W
Input voltage: 170 V - 265 V
Output voltage: 0 V - 600 V
The PVS10005, PVS60085, and PVS60085MR programmable DC power supplies offer clean output power up to 5.1 kW, excellent regulation, and fast transient response time characteristics in an industry-leading 2U package. These power supplies ...
B&K Precision
The MCS-166 Power Supply Module provides power for the MCS-203, MCS-204, MCS-207, or MCS-208 control modules. Features Contact Product Features 120V/220V/240 VAC, 50/60 Hz 24 VDC, 1.5 amp output May be connected in parallel for ...
YOUR CEM OR ODM FOR LITHIUM-ION BATTERIES For many of our customers the specification and design of their battery solution is part of their product IP and for this reason they prefer to specify and design their batteries in house. With ...
VARTA Microbattery GmbH
Fiber optical splitters for multimode applications LEONI Fiber Optics utilizes a photolithographic chip technology to develop and produce planar lightwave circuits (PLC). Your advantages at a glance Broadband transmission spectrum ...
Power: 30 W
Output voltage: 24 V
Current: 1.25 A
COMPACT AND HIGH-PERFORMANCE – WAGO POWER SUPPLY WITH 30 W IN JUST 35.5 MM At a Glance: •Same design and technical features adapted to the new WAGO 3-Phase Power Transducers Ideal accessory for the 3-phase power transducers •30 watts ...
WAGO
Power: 480, 960 W
Input voltage: 400 V - 500 V
Output voltage: 24 V
Overview The 3-phase basic units of the SITOP PSU8600 power supply system include one Ethernet/PROFINET interface as well as one or four configurable outputs (voltage and current threshold) with selective monitoring. If needed, additional ...
Siemens Power Supplies
Overview SITOP BUF8600 for buffering brief power interruptions The BUF8600 buffer modules with maintenance free energy storage units are part of the SITOP PSU8600 modular system and are designed to bridge short-term power failures. ...
Siemens Power Supplies
Overview SITOP BUF8600 for buffering brief power interruptions The BUF8600 buffer modules with maintenance free energy storage units are part of the SITOP PSU8600 modular system and are designed to bridge short-term power failures. ...
Siemens Power Supplies
Power: 0 W - 192 W
Output voltage: 0 V - 60 V
Current: 0 A - 6 A
Series 2280S supplies deliver up to 192W of low output noise power and superior load current measurement sensitivity. Built-in plotting functions allow monitoring trends such as drift. These supplies offer up to 6½-digit resolution for ...
Keithley Instruments
Power: 0.8 W
Input voltage: 0 V - 10 V
Output voltage: 0 V - 10 V
Porter Model CM-400 is a lofty concert microprocessor derived four-channel power control or supply unit intended for use with Porter Mass Flow Meters and regulators. An eight-line, backlit liquefied crystal display offers selectable information ...
Output voltage: -20 V - 20 V
Current: 0.01 A
SIM928 Isolated Voltage Source is applicable for different applications that requires ultra-clean DC. Its voltage can be set between ±20 VDC and has a millivolt resolution, while the source can be driven up to ±10 mA. The SIM928 has two ...
Stanford Research Systems
Passive M12 distributors are available in all conceivable forms and configurations. Furthermore, a number of special versions, e.g. SAI distributors for EX zones or the ergonomic M8, are available only from Weidmüller. These innovative ...
Weidmüller
Power: 60 W
Input voltage: 90 V - 264 V
Output voltage: 230 V
Modular Redundant Power Supplies DPS‑200A The DPS-200A redundant power supply (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. It is an external RPS unit enclosed in solid metal ...
D-Link®
Power: 589 W
Input voltage: 90 V - 264 V
Output voltage: 54, 12 V
589 Watt Redundant Power Supply for D‑Link Managed Switches DPS‑700 Description Redundant Power Supply keeps your switch online in case of Power Supply Failure 1+1 PoE Budget, allowing you to extend your PoE budget by 370 Watts ...
D-Link®
Gigabit PoE Plus Splitter DPE‑301GS The DPE-301GS Gigabit PoE+ Splitter provides Gigabit connectivity and high wattage electrical power to legacy devices that do not support PoE, by separating power and data from a PoE source. Features Simplicity • ...
D-Link®
Product overview: Fluke 500 Series Battery Analyzer Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing. • - The ideal test tool for maintenance, troubleshooting ...
The Signalling Tester MD8475A is an all-in-one base station simulator supporting LTE, LTE-Advanced, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/GPRS/EGPRS and TD-SCDMA/TD-HSPA. It supports service, VoLTE and call-processing tests for multimode ...
Energy efficient urban rail transport plays a key role in contributing to sustainable development. Given the frequent stops of urban rail, capturing and storing braking energy offers a valuable way to reduce energy consumption. Saft’s ...
SAFT
Power: 3,000 W
Input voltage: 200 V - 250 V
Output voltage: 48 V
The NetSure™ 2000 series is a global family of high-density DC power subracks designed for network access applications. Featuring industry leading high density rectifiers in conjunction with an advanced controller, this system delivers ...
Vertiv
Power: 1,215 W
Input voltage: 90 V - 264 V
Output voltage: 5, 12 V
The D1U54P-W-1200-12-HxxC series are 80 PLUS Platinum efficiency 1200 watt, power factor corrected front end supplies with a 12V main output and a 5V (3A) standby. They have active current sharing and up to 8 supplies may be operated ...
Murata Power Solutions
Please specify:
Help us improve:
remaining