Calibration analyzers

... differential optical absorption spectroscopy (UV-DOAS) technology. Compared with the Luft NDIR and Micro-flow NDIR flue gas analyzer, it can measure ultra-low range (0-50mg/m3) of SO2 and NO, which is widely used in industrial emission ...

... Introduction Gasboard-3000Plus is designed with patented Micro-flow infrared technology and able to measure concentration of SO2, NO, CO, CO2, CH4 simultaneously, especially suitable for emission measurement from various stationary sources. Furthermore, ...

... Introduction Gasboard-5020 emission gas analyzer is designed for measuring the emissions of all gasoline, LPG or CNG vehicles, it is developed based on the dual beam non-dispersion infrared (NDIR) principle to measure CO, CO2, HC, and ...

... gas analyzer can be used for measurement of the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional). It is based on the pulsable infrared source and single source two beams non-dispersion infrared (NDIR) method, ...

... Gasboard-3000E is an analyzer for control of exhaust gases from gasoline, petrol, alcohol or LPG engines. It is developed based on Micro-flow NDIR technology for the measuring CO, CO2, O2 and NO exhaust gases. Features • Simultaneous ...

... Product Overview
GasTDL-3001 is an in-situ extractive TDLAS gas analyzer for real-time measurement of NH3 and HCl in flue gas. Based on Tunable Diode Laser Absorption Spectroscopy (TDLAS), it provides highly selective, low-interference ...

... transmission technology (D8193)

... world. Gen-7 analyzers are built around Servomex’s trusted digital sensing technologies for proven reliability, ease of operation, and minimal maintenance. Easy to use and maintain The redesigned Gen-7 range of DF-500 series analyzers ...

... carry portable option and compact calibration system which can be integrated into the rear of the unit. When you work in quality control of ultra-trace O2 contaminants, or carry out leak detection, you need an analyzer ...

... MULTI-GAS NDIR-GFC ANALYZER Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared ...

... Light-915M2 is a compact, portable mercury analyzer designed for convenient direct Hg measurement in air. High accuracy and real-time operation along with small size and weight make it an excellent device for field work. principle of ...

... The in situ analyzer of the cross-stack type is able to perform the average measurement of carbon monoxide over the entire section of the chimney. With no parts in contact with the process and with only the presence of the barrier air, ...

... furnaces, and kilns, with fast and simple service ability, and all at a tremendous value. Our COSA XENTAUR™ O2CX Oxygen and COe Analyzer is the ideal choice to optimize fuel efficiency on most combustion sources and for stack oxygen applications. ...

... No need for calibration, spare parts, or worries about drift and downtime! Our TIGER OPTICS™ Spark™ H2O is fast, easy to start up and operate. For the first time, powerful advanced spectroscopy is available at a popular price for a ...

... cost of ownership is extremely low, with no calibration, spare parts or utility gases required. THE PRISMATIC 3 FEATURES: Simultaneous parts-per-billion detection of CO, CO2, H2O and CH4 Ideal analyzer to meet ...

... Hybrid signal analyzer for power utility automation systems DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard wired binary status signals) and messages on the communication ...

... Light Oxygenated VOCs Analyzer The airmoOVOC C1C3 is designed for the analysis of light oxygenated volatile organic compounds (VOCs) in air or pure gas. This instrument uses a 6-port valve with a single sorbent trap and metallic capillary ...

... Light Volatile hydrocarbons and 1,3-Butadiene analyzers The airmoVOC C2-C6 is designed for the measurement of volatile hydrocarbons compounds from C2 to C6. The instrument uses a 6-port valve with a single sorbent trap and a metallic ...

... main features. Everything from the sample port up to the data storage is integrated in a 19’’-rack 5U. Before delivery the analyzer is tested for at least one week by our quality control department. The Vistachrom software enables ...

... treatment plants Product Features: Multi-range that can be set according to site requirements Auto and manual calibration to calibrate instrument automatically each day Auto recovery after power failure Auto control of ...

... standard flow meter. In-built calibration module, with calibration frequency settable by users, automatically calibrates tube wavelength and horizontal and vertical coordinates of the spectrum; an internal standard calibration ...

... control owning to internal calibration elements that check system stability automatically all the time Special radiation protection to offer all-round security Higher detection precision compared with the reference ...

... Potentiometric measurement of pH value and/or redox potential (single or dual channel) Easy calibration without sensor disassembling Minimized maintenance with integrated sensor cleaning Integrated temperature measurement and compensation Redox ...

... Complete monitoring system for the automatic, continuous measurement of phosphate in boiler water Automatic zero calibration for a long term stable measurement Robust process photometer suitable for highly contaminated boiler samples Reproducible ...

... water steam cycles Highly stable measurement due to thermostatically controlled photometer Programmable, automatic calibration (zero-point and slope) and verification Easy to use, integrated grab sample function Silica 0 – 1000 ...

... Many questions about foam, one universal approach: The DFA100 Dynamic Foam Analyzer measures the foamability of liquids and the stability of quickly decaying or long lasting foam based on reproducible foaming and height detection. With ...

The MAT1100 is the right choice whenever you only need to be concerned with the oxygen concentration or whenever only nitrogen is used. Its electrochemical oxygen cell (EC) measures within the range of 0.5 and 35 volume per cent and with an accuracy of ...

If you need to measure the concentrations of oxygen and carbon dioxide, then the MAT1200 will be the appropriate model. In addition to an electrochemical oxygen cell, it features a non-dispersive infrared sensor (NDIR) for the CO2 measurement over the ...

The zirconium dioxide sensor (ZrO2) of the MAT1400 measures the oxygen concentration over the entire measurement range between 0 and 100 volume per cent. Especially in case of a very low concentration, it will achieve an excellent accuracy of ±0.001 volume ...

... Overview

• The UHV-103A is a portable tester for automatic examination of protective and metrological current transformers (CT) and potential transformers (PT), suitable for laboratory and field testing.
• Delivers excitation

... The UHV-109 CT/PT Polarity Tester is a portable automated instrument for verification of protection-class (P-class) and metering-class current transformers (CTs) and potential transformers (PTs) in laboratory and field environments.

Key ...

... Introduction
The N500 2.0 is a Gas Permeability Analyzer based on the differential pressure method, designed with reference to GB/T 1038 and related standards. It measures the gas transmission rate ...

...

... temperature-compensated analog signals and Modbus RTU digital signals, supports calibration via downstream devices and direct connection to dedicated transmitters with one-key calibration. Features include high-temperature ...

... The online ozone analyzer for process water is equipped with a German-made OZ1.2 sensor, utilizing a membrane-covered amperometric 2-electrode system to accurately measure ozone concentration in surfactant-free water (swimming pool water, ...

... matter (SNF) on various milk, cream and whey matrices

... >Water Analyzer from Engineering and Environmental Solutions (E&E) is designed to provide precise water quality monitoring. Large-scale data storage and automatic zero calibration guarantee reliable accuracy with little ...

... to transmit data 3.Unit: ppm, mg/m3,LEL%,vol% 4.Built-in settings for many functions 5.With temperature compensation 6. Calibration overdue reminder 7.IP66 durable shell with anti-static rubber coated 8.All function self-test, failure ...

... MYHB-KQZS06 Micro Air Quality Measure Station is a product launched by our company to provide real-time monitoring of outdoor air pollutants.Micro air station is a common real-time data collection in the atmospheric environment(carbon dioxide, sulfur ...

... CONTINUOUS PARTICULATE MONITOR BAM1006 adopts the principle of β-ray absorption to measure the particle concentration. The result is accurate and reliable. The monitoring and data management are operated by the microcomputer system , which is able to ...

... Introduction The ZWIN-EC06 odor online monitor is a new type of analyzer that the company has used for many years of atmospheric environment monitoring experience, and is a new type of analyzer that has been continuously ...

... Beer-Lambert principle.CO concentration can be obtained by comparing infrared energy adsorption by sampling gas and reference gas. This analyzer can completely control all functions and also provides online instruction ...

... average of 7 plus years Ease of calibration adjustment User friendly, menu driven interface Stand alone instrument with ability to upload readings and calibrations to laptop/tablet/PC Options Diesel Calibration ...

... to lab Long field life, average of 7 plus years Ease of calibration adjustment User friendly, menu driven interface Stand alone instrument with ability to upload readings and calibrations to laptop/tablet/PC Military ...