... AUTOMATED BALL VALVES For most KLINGER valves, we offer automation according to customer requirements. Automated Ball Valves As renowed manufacturer of ball valves we also offer ...
KLINGER-SCHÖNEBERG GmbH
DN: 50 mm - 1,400 mm
Pressure: 16 bar
... Rubberlined EVS Short pattern, from DN 50 with centring lugs Construction - Concentric butterfly valve with bonded vulcanised rubber linings Body type - Wafer type End connection - EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 ...
Wouter Witzel EuroValve B.V.
DN: 0.375 in - 0.75 in
Pressure: 0 bar - 350 bar
Flow rate: 30 l/min - 100 l/min
... Flow range from 30 up to 100 l/min; maximum pressure 350 bar; port size 3/8"-1/2"-3/4"; electric “on-off” control ...
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve featuring an extremely ...
PIETRO FIORENTINI
... The electropneumatic slide gates mod. SE are used for the automated installations with remote driving system. Since abovementioned data are approximated and could change, please contact the factory before the purchase. Subject to client agreement, Defino ...
Defino & Giancaspro
DN: 150 mm - 450 mm
... Diaphragm Valve range is by far the strongest Mucon powered actuated Iris valve. It has an extremely robust construction with reliable drive elements making this product the Iris Valve ...
DN: 1 in - 2 in
... Mark D & DA Series are single port, screwed-in metal-seated valves with unbalanced post-guided valve plugs, and push-down-to-close plug action used for high pressure applications. These valves are used ...
JORDAN VALVE
... self-cleaning elastomer sleeve isolates all mechanical parts of the valve, so the breakaway torque remains constant. Red Valve Series 5200E Valves are actuated by AUMA, Rotork or Limitorque electric ...
DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C
... operation lever Kit for limit switches for ON/OFF position indicator Kit for ISO flanges Actuators Double acting and single acting pneumatic actuators On request: limit switches, position indicator Electric ...
Brandoni
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C
... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal materials. The ...
SuZhou KoSa Environmental Protection CO.,LTD
Pressure: 6, 10 bar
Temperature: 0 °C - 240 °C
... pressure tight chamber valve is flanged directly at the reactor inlet. - Continuous entry in a pneumatic conveying system in combination with the solids blow through rotary valve, that is fixed directly below the chamber ...
Pressure: 0 bar - 7 bar
... The Fluigent MX is a bidirectional 11-port / 10-way microfluidic valve for injection or selection of up to 10 different fluids. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor ...
DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C
... rangeability - 50:01:00 The range of air source signals - 20 to 100,40 to 200,80 to 240 Electric actuator - Depand on the thrust and stroke which valve need Power voltage - 220V.AC 50Hz 380V.AC 50Hz( ...
Valvesonly Europe
DN: 0.375, 0.5, 0.18, 0.25, 0.75 in
Pressure: 0 psi - 20,000 psi
Temperature: -26 °C - 204 °C
... Bidirectional trunnion style for optimal performance Three standard mounting options Options Pneumatic and Electric Actuators Materials Body / Side Adapter / Stem - 316 cold worked stainless steel Packing – O-ring ...
Precision High Pressure
DN: 10 mm - 50 mm
Pressure: 10 bar - 30 bar
Temperature: -10 °C - 120 °C
... Full bore / PN25 to PN40 (depending on size) Brass valve, FPM O’Ring, PTFE seats BSP threaded end connection Fluid temperature : -20°C +110°C** Working pressure: DN8 to DN32 = 40 Bar* DN40 to DN50 = 25 Bar* Actuator temperature: ...
VALPES
DN: 25 mm - 300 mm
Temperature: -200 °C - 450 °C
... Neles™ Finetrol™ eccentric rotary plug valve is designed for liquid, gas, vapor and slurry control in general and demanding applications. Neles Finetrol is certified to SIL 3. Excellent control performance and capability to handle impure ...
DN: 10 mm - 25 mm
... screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized steel sleeve: as ...
Ho-matic
Pressure: 6 bar
... The EBL wolf-mouth valve is used at the outlet of storage silos for the extraction of spray dried products. ...
DN: 50 mm - 1,000 mm
... Knife gate valve, uni-directional. Available as metallic sealing or with other kinds of seals. Stainless steel spade. Available with actuator. Suitable for powder media. Connections for cleaning nozzles available. ...
Pressure: 60 psi - 100 psi
... for access close to components Same mounting pattern as existing ES Series valves Can replace traditional jet or needle dispense valves used for detailing Divorced valve design prevents material ...
PVA
DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -20 °C - 160 °C
... DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body and ball Brass chromium plated, stem Brass nickel plated • Mounting flange ISO 5211 for direct mounting pneumatic or electric actuators • Seats ...
Vapo Techniek B.V.
DN: 0.25, 0.125 in
Pressure: 70 psi
... Diaphragm Valves are designed to dispense low to medium viscosity materials with precision accuracy over a wide range of shot and bead sized down to a fraction of a micro liter. An internal spring return makes the valves ...
... Electrical Post-Mix Taps with Flow Control to maintain the fluid flow constant depsite any pressure variations. Ideal for water, soda, soft drinks, fruit juice and wine. Operates with coils of 24V / 50Hz 5W. SK approved. Electric ...
DN: 50 mm - 2,000 mm
... Bidirectional knife gate valve. The valve body is composed by two body parts that are bolted together. This valve is bidirectional with equal maximum Dp resistance from both flow directions. USE Low ...
C.M.O.
DN: 40 mm - 400 mm
Temperature: -20 °C - 80 °C
DN: 0.375 in - 2 in
Pressure: 150 psi
Temperature: 70 °F
... close electrically actuated ball valves sizes 3/8″ thru 2″ have direct mounted unidirectional 90º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA 4X), have a green ...
Clark
DN: 0.5 in - 12 in
Pressure: 110 psi
Temperature: 200 °F
... sanitary high performance 316 butterfly valve series stand above others in the sanitary and fine chemical fields. The valves incorporated an advanced design with characteristics unseen in other valves. ...
... for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 series are also available with bonnet extension type, bellows seal type and jacket type. Application ...
Wuxi Smart Auto-control Engineering Co., Ltd.
Pressure: 30 mbar - 500 mbar
Temperature: -25 °C - 55 °C
Flow rate: 0 m³/h - 10 m³/h
... Johnson Electric product range of Gas Shut-Off valves is the industry's first integrated gas shut-off valve to combine mechanical valve, motor, sensors and control electronics for smart ...
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... live steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, pneumatic, hydraulic. Technical ...
Pressure: 600 psi
... indoor/outdoor operation and the battery back-up for when there is a power failure. Features Double O-ring seal on valve shaft Manual test button Corrosion resistant valve coating ...
DN: 20, 15, 25 mm
Pressure: 2.5 bar
... Ajax WaterStop Jeweller is a smart valve designed to protect facilities from flooding. The valve automatically shuts off the water supply within 7 seconds of a leak being detected, whether by LeaksProtect Jeweller or ...
DN: 6 mm - 12 mm
Pressure: 10,000, 6,000 psi
Temperature: -54 °C - 149 °C
... Parker's High Pressure HB Series Ball Valves provide reliable shut-off or switching functions. The upper and lower bearings enhance the resistance of the trunnion design stem against seizure, and increase the valve life ...
Watts Fluid Air
... seals. The result – a quality EGR valve, highly resistant to extreme heat, contamination, corrosion and wear. Precision engineered Even the smallest of differences in the shape of the valve head can affect both ...
Temperature: -50 °C - 105 °C
... TECHNOR® drainage valve for installation on enclosures with increased safety intended for use in explosive atmospheres zones 1 & 2 (gas), 21 & 22 (dust). This valve allows condensation to be drained from inside the enclosure. ...
DN: 15 mm - 400 mm
... Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control with pump protection system by ...
The vacuum suction unit conducts the shredded chips via a worm conveyor to an intake port connected to the suction system. The vacuum suction unit is normally mounted downstream of the discharge conveyor of a machine tool. As an option, a shredder can ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 16 bar
Temperature: -10 °C - 100 °C
... Materials and construction
- Valve body: DZR corrosion-resistant brass (EN12165-CW617N-DW)
- Flow sensor: PEEK body with HC276 electrodes
- Valve unit: modulating 2-way ball valve,
Flow rate: 5 l/min - 2,400 l/min
... developed a range of 3 stage valves. The characteristics of these valves have been optimized to provide the best possible performance in test applications when combined with the Hydropuls actuators. Special ...
Highly accurate and linear pressure regulating device
the best suppliers