DN: 50 mm - 3,500 mm
Temperature: 0 °C - 600 °C
... High Performance Wafer Butterfly Valve Fabricator: High Performance Butterfly Valves, Wafer Type, 2-140 Inch, 50-3500mm, 150-1500 LB, CS, SS, Aluminium Bronze. The Med Wafer High-Performance Butterfly Valves ...
China MED Valve Co., Ltd.
DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C
... meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves or valve ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C
... B24: Mono 230V/50Hz Disc material Ductile iron GGG50 coated Connection between flanges Operating system BERNARD electric actuator ...
TECOFI
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 50 °C
Flow rate: 290 l/min - 4,800 l/min
... control valves - Series EPR Proportional valves, series EPR, are used in the field of pneumatics (compressed air) and allow the adjustment of the output pressure by means of an electrical signal. Depending ...
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 200 °C
... Flanged EN or ASA 2 ways linear control valve available in different materials and pressure ranges with electric, electro pneumatic or pneumatic action. ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
DI NICOLA INFINAM
Pressure: 5 bar - 30 bar
Temperature: 10 °C - 50 °C
... DS dosing system via a cable set of up to 20 meters in length. Advantages The PDV04 is viscosity-, pressure- and temperature-independent and ensures extremely process-safe metering thanks to electronic monitoring ...
Dosier- und Prüftechnik GmbH
DN: 65 mm - 300 mm
Pressure: 10, 16 bar
... Resilient seated gate valve with smooth, straight-through bore Hawle E3: Double bayonet O-ring carrier is connecting the spindle to the bonnet, allowing a fully encased, uniform epoxy powder coated bonnet for further improved ...
Hawle
Pressure: 0.2 MPa - 0.8 MPa
Temperature: -40 °C - 80 °C
... 1. Working pressure ：0.15-0.8Mpa； 2. Working type: Internally plot-actuated 3. Effective sectional area:14-16mm² 4. Working Medium：40 Micron filtered Air ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
Pressure: 60 bar
Temperature: 120, 180 °C
... Butterfly valves are a versatile type of valve used for on-off and flow adjustment. Butterfly valve is an economical type of valve that takes up little space in the pipeline, provides ...
Ekin Industrial
DN: 0.25 in - 4 in
Temperature: -20 °C - 150 °C
... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
Yongkang Yonlin Industry & Trade Co.,Ltd Yongkang Lianggong Valve Co., Ltd.
DN: 40, 32, 25, 20, 15 mm
Pressure: 2 MPa
Temperature: 2 °C - 90 °C
... worldwide. Benefits of V3 3-Way Motorized Ball Valve Efficient Flow Control Breeze 3-way motorized ball valve is engineered for efficiency and precision. With this 3-way motorized ...
Beijing Breeze Technology Co.,Ltd
DN: 0.5, 0.75, 1, 1.25 in
Pressure: 1.6 MPa
Temperature: 1 °C - 130 °C
... HTW-EG200 Series Motorized Ball Valves are used to control the on/off of heat/cool water air-conditioning system pipe to control the room temperature. The valve is driven by synchronous motor. The motor ...
Hotowell International Co., Limited
DN: 0.5 in - 6 in
Pressure: 10 MPa - 76 MPa
Temperature: -29 °C - 593 °C
... standard: ASME B16.34 Valve body material: WB36/A105/F22 Flow characteristics: E%/L Leakage level: ANCI FCI-02 V Product Features 1. - Good valve core stability. The sturdy and durable guide cylinder provides ...
Suzhou Delan Energy Science & Technology Co.,Ltd
DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C
... GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic drives enables an extremely ...
DN: 50 mm - 300 mm
Pressure: 10 bar
Temperature: -40 °C - 90 °C
... be installed as an end line valve, bottom discharge valve or tank dump valve The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 10 mm - 65 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C
... Body material: stainless steel Pressure:0-16bar Orifice:10-65mm Pipe size:screw-type welded-type Fluid Media: Air etc Application industry Beer beverage, disinfection equipment, rubber machinery, textile printing and dyeing, pharmaceutical, medical ...
DN: 1 in - 24 in
... Balancing Valves are designed specifically for heating/air conditioning systems in multi-story commercial buildings. Balancing Valves provide a means of adjusting and reading the flow in condenser and hot or chilled water ...
DeZURIK
DN: 32 mm - 1,000 mm
Pressure: 10 bar - 40 bar
... two main solutions. Together with the design of the main valve, established for modulating, HYDROSTAB ELECTRICAL CONTROL offers a much longer service lifetime than motorized butterfly or gate valves. Pressure, ...
Belgicast
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... control. Here's how a motorized valve works: Electric motor or actuator: The heart of a motorized valve is the electric motor ...
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
... Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...
MARAN E PERACINI
... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The main features ...
Pressure: 31.5 MPa
Temperature: -20 °C - 70 °C
Flow rate: 220 l/min - 430 l/min
... hardware facilities, the products cover the whole fields of hydraulic components, including industrial valve series, mobile hydraulics, explosion isolation valves series, and hydraulic electronics... ...
Ningbo Hoyea Machinery Manufacture
DN: 1.5 in - 4 in
Temperature: 140 °C
... VACUUM VALVE 5/3 5-way, 3-position air flow reversing valve for blower systems Available with double-acting pneumatic actuator or single-acting electric actuator Type INVA 53 is a 5 way 3 position ...
MAROS Engineering
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
... The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve is equipped ...
the best suppliers