Electric valves

DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C

The GEMÜ F60 motorized 2/2-way filling valve is designed for extremely precise and fast filling processes in aseptic and hygienic areas of application. GEMÜ F60 enables activation in real time, ultra-quick ...

DN: 10 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C

... angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 60 °C

... 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 140 °C

... and power stations ■ - Chemical and process engineering ■ - Service water ■ - Air ■ - Oil ■ - Technical gases ■ - Abrasive and aggressive fluids Technical Data Function Shut off/control flow Connection type Flange Design ...

DN: 40 mm - 100 mm
Pressure: 73, 145, 87, 116 psi
Temperature: 275, 284 °F

Valves / Mixproof Valves The DT4 tank outlet mixproof valve is used for the reliable separation between the tank and servicing pipeline. The DT4 tank outlet is an extension to ...

DN: 38 mm - 152 mm
Pressure: 10, 6 bar

The W72RS Series Mix Proof Valve features a lower radial seal for minimal spillage of products when opening or closing. Specifications Materials Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404) Non-Product: ...

Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C

The T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, gas, oil and steam among ...

DN: 0.8 mm
Pressure: 0 MPa - 0.5 MPa

Body material - PPS Membrane material - EPDM Dimension - 10.15*12.7*34.5 No. of ports - 2 Voltage - 24V Power - 4W Structure - Direct acting piston type Operating Voltage - 5V Flow rate - 3g/s Main Features ...

DN: 2 mm
Pressure: -70,000 Pa - 250,000 Pa

Installation Method - Base mounted or Bracket mounted Dimension - 58 * Φ25 mm Power - 12V：5.1W / 24V：5.4W Flow rate - 8.5 g/s（ 25℃，50kPa，under pure water） Tube Size - 2*4 mm Main Features - 1. Used with hoses, ...

DN: 6 mm
Pressure: -70,000 Pa - 80,000 Pa

Installation Method - Bracket mounted Dimension - 102.5*73*36 Power - 12W Flow rate - 85 g/s（ 25℃，50kPa，under pure water） Tube Size - 6*9 mm Main Features - 1. Used with hoses, the medium only exists in the pipeline. 2. ...

DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C

Wall clamping screws FRL1 M4x14 FRL2 M5x18 FRL3 M6x20 Fluid Compressed air. Assembling position Vertical

DN: 0.25 in - 1 in
Pressure: 3 bar - 10 bar
Temperature: -10 °C - 50 °C

Wall clamping screwsFRL1 M5x18 FRL2 M5x18 FRL3 M6x20 FluidCompressed air. Maximum Pressure 15 bar Assembling positionVertical

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devicesions due to ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C

... Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal materials ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

... Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal materials ...

Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C

For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.

Pressure: 0 bar - 15 bar
Temperature: -40 °C - 125 °C

Auto Drain Valve with inbuilt water-in-fuel (WIF) sensor for water-fuel separator with redundancy feature in the form of ball mechanism to prevent any fuel leaks.

Pressure: 0 bar - 5 bar
Temperature: -40 °C - 125 °C

Very economical version for coolant control valve for heating application in single chamber HVAC systems, Urea heating tank or Battery cooling in electrical vehicles or any other application involving coolant management.

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 140 °C

... also available in electrically actuated VKR/CE configuration. Actuators are firmly connected to the valve by the special FIP Power Quick modules fully made of PP-GR ...

DN: 3 mm
Pressure: 16 bar
Temperature: -10 °C - 80 °C

VQS condensed drain valves are necessary to secure the optimal status of all different components of a compressed air treatment system. Electric and timed, it’s programmable to discharge the drain in ...

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Electric ball valve Body material: Stainless steel, Carbon steel End connection: RF, BW Operation: Electric

DN: 50 mm - 1,000 mm
Pressure: 16 bar - 420 bar

... complete the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with athena GROUP actuators and valve accessories ...

DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar

Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic piston actuator, electric ...

Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min

DN: 150 mm - 180 mm

Pressure: 17.2 bar

... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... high flowrates with minimum head loss. * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by an electric signal ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... remotely. An electric detection system activates a 3 way solenoid valve through a control panel, to open a 3 way actuator and consequently, the FDV deluge valve opens. As the actuator ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C

special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable ...

DN: 10 mm - 25 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 140 °C

Dosing ball valve based on the C 200 Finely adjustable using 180° opening angle Reproducible settings by means of 180° scale disk / scale division 5° Simple automation using electric variable speed actuators

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... control. Here's how a motorized valve works: Electric motor or actuator: The heart of a motorized valve is the electric ...

DN: 10 mm - 40 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

2-way FF PVC with connection kit Version with threaded or to-be-glued connections

DN: 10 mm - 40 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

2-way FF PVC with connection kit Version with threaded or to-be-glued connections

DN: 20 mm
Temperature: 5 °C - 50 °C

SINTESI motorised valve – 2 way MM BRASS HEATING / COOLING / SANITARY WATER ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Class protection: IP54 Operating ...

DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C

... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...