- Hydraulics - Pneumatics >
- Pump >
- Feed pump
Feed pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 76 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Double-diaphragm pump - 5223-150 Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, ...
Lutz Pumpen GmbH
Flow: 715 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Varnish pump - 5253-340 Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical ...
Lutz Pumpen GmbH
Flow: 715 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Varnish pump - 5252-240 Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical ...
Lutz Pumpen GmbH
Flow: 4.5 m³/h - 300 m³/h
Pressure: 150, 200 bar
Head: 1,560, 1,200 m
... barrel pump with tandem impellers and a balance drum to carry axial thrust forces. It is designed for users who need the hydraulic range and performance of a ring section pump, but demand the design ...
FLOWSERVE
Flow: 0 l/min - 15.1 l/min
Pressure: 0 psi - 180 psi
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 12 bar, 1.2 MPa (180 psi) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount ...
Pressure: 0 bar - 60 bar
GMI-A Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 max. delivery pressure in bar: 60 Number of outlets: 1...4 Tank size in l: 0,7
Pressure: 0 bar - 60 bar
GML-A Delivery Pump for Grease Medium: grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 max. delivery pressure in bar: 60 Number of outlets: 1...4 Tank size in l: 0,4
Flow: 0 m³/h - 3,000 m³/h
Pressure: 150 bar
Head: 0 m - 700 m
... solution, propylene pumps in petrochemical applications Condensate, reflux, vacuum gas oil, stripper bottom in Refinery, LPG, LNG Water, wash water, low-pressure boiler feed Our ...
Baker Hughes
Flow: 200 l/min
Pressure: 1 bar - 8 bar
1” non-metallic diaphragm pump The ARO nonmetallic 1” PD10P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It ...
Flow: 0 l/min - 197 l/min
Pressure: 1 bar - 8 bar
1” metallic air operated diaphragm pump The ARO metallic 1” PX10X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
1”1/2 non-metallic diaphragm pump The ARO nonmetallic 1”1/2 PD15P-XXS-XXX air operated diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...
Flow: 40 m³/h - 290 m³/h
Pressure: 12, 6 bar
Power: 2.2 kW - 30 kW
... without opening the pump Sturdy cardan shaft with protective sleeve DESIGN AND FUNCTION OF THE CC PROGRESSIVE CAVITY PUMP Pumps for abrasive and viscous media Progressive cavity ...
Flow: 20 m³/h - 18,000 m³/h
Pressure: 17 bar
Head: 5 m - 150 m
Premium design white cast iron pump for long service life handling severe slurries. The maintenance-friendly single-wall construction and heavy section white cast iron wet end combined with the cartridge bearing assembly ...
KSB S.A.S. - France
Flow: 1.8 l/min
Pressure: 160, 20 bar
Fluid temperature: 5 °C - 80 °C
High-pressure piston pump, stainless steel, for AirCoat applications 160 bar and 1.8 l/min max. Ideal e.g. for professional single coating work stations production and for workshops. Excellent coating results ...
WAGNER
Flow: 5.1 l/min
Pressure: 10, 6 bar
Fluid temperature: 60 °C
... its compacity, the 02C85 pump saves waste during flushing and quick color changes. The fluid section special design combined to GT seals allow priming at very low pressure for a large range of viscosities. DESCRIPTION Compact ...
SAMES KREMLIN
Pressure: 10, 30 bar
ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...
Pressure: 40 bar
ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
... automatic flushing system - Options possible The dosing unit for filling machines can be used as feeding pump in subsequent processes: As conveying pump from A to B, to be used in ...
Flow: 0.7 m³/h - 120 m³/h
Pressure: 18, 12 bar
Ideal pump for crumbly media in compact design for nearly all branches of industry The NEMO® BO/BS progressing cavity pump with hopper and coupling rod with feeding ...
NETZSCH Pumps & Systems
Flow: 0.2 m³/h - 60 m³/h
Pressure: 36 bar
... product feed into the conveying elements, the pump housing is designed with an enlarged, rectangular feed hopper and conical force-feed chamber as well as a special coupling ...
NETZSCH Pumps & Systems
Flow: 40, 70, 120 m³/h
Pressure: 12, 8 bar
... It is the result of continuous development of the NEMO® progressing cavity pump with feed hopper and feeding screw. Thanks to its pump housing with a large, rectangular ...
NETZSCH Pumps & Systems
Flow: 22 m³/h - 318 m³/h
Head: 6 m - 104 m
Pumps / Centrifugal Pumps Aseptic version of the 200 Series Heavy-Duty Sanitary Centrifugal Pumps. Sterile steam at every potential entry point blocks contaminated air or liquid. Features For ...
Flow: 150 l/h - 4,400 l/h
Pressure: 4, 4.5 bar
Power: 0.12 kW - 1.1 kW
Mouvex® TM Series Eccentric Disc Pumps are ideally suited for intensive-duty applications such as the transfer of heating fuels and heavy fuels. Known for their legendary ruggedness, these pumps offer ...
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM3) - ALBIN PUMP Specifications: Flow rate: up to 126 l/h (33 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Flow: 108 l/h - 600 l/h
Pressure: 6.9, 3.4, 2.1, 4.5 bar
Power: 0.3 kW
PERISTALTIC METERING PUMP (KM4) - ALBIN PUMP Specifications: Flow rate: up to 600 l/h (158.5 gph) Discharge pressure: up to 6.9 bar (100 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 ...
Flow: 0 m³/h - 30 m³/h
Pressure: 0 bar - 4 bar
Industrial flexible impeller pump for standard and hygienic applications Polished stainless steel for hygienic applications Industrial stainless steel for standard, non-sanitary applications Bronze for ...
Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m
... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • Closed impeller design to achieve ...
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... Series 3/8” PVDF Air-operated double diaphragm (AODD) pumps are available in an extensive range of diaphragms, seats and balls. They offer a wide range of applications and fluid compatibility. These pumps ...
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... Polypropylene Air-operated double diaphragm (AODD) pumps are available in an extensive range of diaphragms, seats and balls. They offer a wide range of applications and fluid compatibility. These pumps ...
Flow: 0 us gal/min - 74 us gal/min
Pressure: 17 bar
Head: 176 m
The EH2-M pump is a 2:1 ratio high-pressure pump powered via compressed air. Capable of delivering discharge pressures twice the inlet pressure up to 250 psig (17.2 barg), the EH2-M pump ...
WARREN RUPP
Flow: 0 m³/h - 18 m³/h
Head: 0 m - 113 m
Power: 0 kW - 4 kW
MONOBLOC ELECTRIC PUMPS Monobloc electric pumps. Used for water supply from tanks or basins for domestic, civil, agricultural use and where water pressurisation is required in general. The impellers ...
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps ...
NOV Inc.
Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F
... 2,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame pumps • High-pressure water • Pastes & gels • Food, wastes & by-products • Chemical feed & sampling • Coolants & lubricants
NOV Inc.
Flow: 0 m³/h - 215 m³/h
Pressure: 0 bar - 48 bar
Fluid temperature: -10 °C - 100 °C
The EZstrip™ Cake Pump features a specially designed feed chamber that can easily be disconnected allowing access to the rotating assembly. The rotor can be separated from the conveyor allowing removal ...
NOV Inc.
Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW
... can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps ...
Brinkmann Pumpen
Flow: 20 l/min
Head: 15 m - 220 m
Power: 0.48 kW - 2.2 kW
... FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps ...
Brinkmann Pumpen
Flow: 0 l/min - 160 l/min
Head: 0 m - 35 m
Power: 0.54 kW - 1.95 kW
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming ...
Brinkmann Pumpen
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, ...
Flow: 94, 189, 220, 284, 565 l/min
Pressure: 16.8, 17.2 bar
... results in cost savings of disposal of the filter cake. Verderair high pressure pumps are constructed to be self-regulating for filter press feeding. The high pressure pumps can run dry safely, will not ...
Verder Liquids
Flow: 0 l/min - 189 l/min
Pressure: 0 bar - 17.2 bar
Head: 4.9 m - 8.8 m
The Verderair VA25-HP (DA) is a double acting, air operated, 2:1 high pressure diaphragm pump (AODD) suitable for charging filter presses.
Verder Liquids
Flow: 0 l/min - 94 l/min
Pressure: 0 bar - 17.2 bar
Head: 4.9 m - 8.8 m
The Verderair VA25-HP is a single acting, air operated,2:1 high pressure diaphragm pump (AODD) suitable for charging filter presses.
Verder Liquids
Flow: 27 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... use: pressure supply / transfer PUMP PERFORMANCE Ratio: - 4:1 b Max cycles / minute: - 60 Displacement per cycle: - 456 of the civil code Air consumption @ 6 bar: - 1300 Nlpm PUMP SPECIFICATIONS Lower ...
Airmation ECP srl
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... : supply / transfer / recirculation PUMP PERFORMANCE Ratio: - 3:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 1000 Nlpm PUMP SPECIFICATIONS Lower ...
Airmation ECP srl
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... Cycles / Minute - 60 Displacement Per Cycle - 757 civil code Air consumption @ 6 bar - 1600 Nlpm SPECIFICATIONS: Lower Pump Material - Stainless Steel Pumping stem material - 316SS with HDCC ceramic coating Cylinder ...
Airmation ECP srl
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining