Fieldbus I/O modules

... The Trio CAN16 Output module offers a compact DIN rail mounted output expansion capability for all Trio Motion Coordinators. Up to 16 P317 modules may be connected to the CAN network which may be up to 100m long. This provides 256 distributed output channels ...

... Presentation
The TX IO 600-040 is a LoRa Easy I/O module designed to add status feedback and relay commands to a BMS (Modbus or BACnet) without additional wiring. It provides 2 dry-contact inputs, 4 relay outputs and three operating modes: remote ...

ASi-5 Module with integrated IO-Link Master in IP20, 22,5 mm x 114 mm, with 4 contacts, 4 x IO-Link ports with configurable conectors for port class A or port class B, sensor supply (IO-Link supply and input/output supply) out of AUX, periphery connection ...

... NXI-5100 series high density programmable resistance card programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, the flexible ...

... Short description
Our EA modules are designed for applications in building automation, industrial automation and infrastructure. Available in widths of 4, 8 or 12 TE depending on the total number of I/Os, these analog IO modules fit standard ...

Powering the Digital Transformation with EtherCATPLANET IECS-1116-DO is an industrial EtherCAT slave I/O module equipped with the EtherCAT protocol for today's distributed industrial applications. The IECS-1116-DO provides high-density digital output ...

... 8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ASCII or industry ...

... Industrial IoT Remote I/O • - Access data through Modbus/TCP/RTU/ASCII • - Supports MQTT for IIoT applications • - 2 x redundant LAN ports • - Support for MQTT Security over TLS • - Optional WiFI version with Client mode • - Up to 20 x different ...

... Multifunction I/O, Digital Source I/Os for nominal 24 volt, Analogue I/Os for 4-20 mA signals, P-NET via Light-Link, Programmable in COPP • Digital Source I/Os for nominal 24 volt • Analogue I/Os for 4-20 mA signals • HART communication interface • ...

... TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general remote Ethernet IO monitoring and control. The device ...

... Long-Range, Scalable and Highly Resilient Multi I/O Node and Gateway The ELPRO 915U-2 Wireless Mesh Networking I/O and Gateway is a multiple I/O node that extends communications to sensors and actuators in local, remote, or difficult to reach locations. ...

The RIO40S remote I/O module, based on a CANopen architecture, ensures fast and reliable communication. Ultra compact, it can be easily integrated into any type of cabinet or electrical cabinet. Thanks to its RJ45 connectors designed for quick and easy ...

... The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST relays and is ...

... Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low Voltage Digital outputs ...

remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILM can exchange signals from secondary devices (IO-Link, standard ...

... VPA 3CG Profibus Adapter VAMP protection relays can be connected to Profibus BP by using an optional Fieldbus card, or via this external device Relay can be monitored from the host system Fieldbus board can be installed inside a VAMP 200 Series relay Normally ...

This product is an expansion module that adds a digital output interface to the CPU unit of the CONPROSYS nano series. CPSN-DO-08L has the opto-coupler isolated Output 8 channels (current sink output) whose response speed is 200μsec or less. This product ...

... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling up to 6 ...

... Unit that converts 1 CH of IO-Link ports in IO-Link Master to 16-point of digital I/O Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master UR Series. Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once. Digital ...

Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and ...

... -Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used for local control -Built ...

The 115SS range of wireless I/O multiplexers provide an interface to MTL wireless networks for sensors, transducers and switches. The 115S can communicate via Modbus RTU or a point to point exception reporting protocol. The 115S possesses configurable ...

... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...

... Great flexibilities in number and type of I/O signals: DC current/voltage, temperature, strain gauge, AC current/voltage, AC power, etc. Economical DC input module can handle fully-isolated 4 points up to non-isolated 16 points. Hot-swappable I/O modules Dual ...

... Belden adds a new I/O module to Lumberg Automation™ LioN-Link decentralized I/O fieldbus system for safety applications The new Lumberg Automation™ I/O module (0942 UEM 612), which meets the requirements of protection class IP67, allows safety-related ...

... The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen. Features Voltage ...

TigoMaster 2TH is an industrial-grade IP67 IO-Link Wireless Master platform. It has two IO-Link Wireless tracks, supporting up to 16 IO-Link Wireless devices simultaneously. The TigoMaster 2TH includes interfaces to a variety of Industrial Ethernet protocols, ...

... M12 interface、multi-protocol bus module、16DI/DO configurable、PNP、007E31 > Integrated four Ethernet interfaces: PROFINET, Ethernet/IP, CC-Link IEF Basic、Modbus TCP > 8 ports 16 signals > Input/output configurable > Protection level: IP67 (when installed ...

The SPC-SDIO-S0808SPK is an intelligent distributed IO module designed by SonnePower for industrial and vehicle control applications. With 8 flexible I/O channels, a CAN bus interface supporting CANopen, and built-in voice alarm functionality, this smart ...

The Modbus I/O modules allow digital and analogue input values to be connected using the Modbus communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with ...

CAN-IO module CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports eight digital 24 V / 500 mA output and eight analog input channels. The inputs are split in ...

... GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 24 Pin Connector USB2CAN Interface for Configuring Device Up to 19 Digital Inputs Up to 2 Frequency Inputs Up to 16 Analog Inputs Up to 2 Current Inputs Up to 4 Resistive Inputs Up to 19 Low-Side Outputs ...

MCM260Xs are data acquisition modules. The complete series includes six different combinations of free-programmable analog and digital I/Os. Originally conceived as data acquisition/actuation modules for Pixsys PLCs (programmable logic controllers) and ...

The TRS67 modules are EtherCAT slave devices, available in plastic or metal, waterproof and dustproof, compliant with the international standard IEC 60529. Depending on the model, each connector contains digital inputs or outputs and/or a connection to ...

... The MPNC020 module has digital inputs/outputs and it can be used as extension of PLC (TPAC) / operator panels (TP) and any other panel that has a Modbus RTU or CANopen communication protocol. Depending on the communication interface it is necessary ...

... 1 stop-function / current 5 A / short-circuit protected »Listen before talk«-technology mit automatic frequency management for higher operational safety or frequency hopping for USA and Canada Several systems can be operated at the same ...

The 12 Inputs, 8 Analog and 1 Relay Outputs CAN I/O Module can extend machine control networks by adding I/O to the CAN bus. The controller features 1 Isolated CAN port for user-defined communications over the bus. It accepts up to 10 analog (0-5 V, 0-10 ...

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured as frequency inputs or counters. ...

... EtherCAT/ PROFIsafe slave module for safe speed and position of 1 axis for further evaluation in a master module 14 safe digital inputs Up to 4 safe digital outputs 3 Encoder interfaces 2 Relay / Pulse outputs 2 auxiliary outputs ...