- Hydraulics - Pneumatics >
- Pump >
- Handling pump
Handling pumps
Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 9 bar
Head: 0 m - 80 m
Self-priming centrifugal pumps Excellent self-priming ability No non-return valve required in the inlet Single unbalanced/balanced seals to EN 12756 (DIN 24960) Mechanical seal with dry-running protection ...
Johnson Pump
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 8 bar
Head: 0 m - 60 m
... series is available in different drive possibilities: KGE: pump with bare shaft for clockwise rotation KGEL: pump with bare shaft for counter-clockwise rotation KGEF: pump ...
Johnson Pump
Flow: 0 m³/h - 125 m³/h
Pressure: 7, 22, 12 bar
... Easy service and maintenance, simple gearbox construction Gentle product handling - Traditional tri-lobe design gives gentle handling, low pulsation and capability of handling particles ...
Johnson Pump
Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed ...
Flow: 0 m³/h - 410 m³/h
Head: 140 m
Fluid temperature: 140 °C
... Marine pumps: • Bilge pump • Ballast pump • Fire pump • Cooling-water pump • Wash-deck pump • General service pump Also ...
Flow: 0 m³/h - 730 m³/h
Pressure: 12 bar
Head: 115 m
... the pumps are suitable as: • Bilge pumps • Ballast pumps • Fire pumps • Cooling water pumps • Wash-deck pumps • Fuel pumps • ...
Flow: 14.3, 16.1 l/min
Pressure: 207 bar
Power: 5.6, 6.2 kW
... wear of the piston oil seal (Patented) Exclusive Sealing System Between Crankcase And Pump Head that prevents dust and dirt getting inside where the pistons work but letting water out (Patented) Solid ...
COMET Spa
Flow: 0.3 m³/h - 9.6 m³/h
Pressure: 6, 10 bar
Head: 16.5 m - 68 m
... and clean water handling in general. Lightweight and easily transportable, small in size. For further technical information see the Databook • Domestic pressurisation • Small-scale garden irrigation • ...
EBARA PUMPS EUROPE
Flow: 20 l/min
Pressure: 8 mbar
Power: 120 W
... vapors Compact, quiet and reliable Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. Especially suited for handling aggressive ...
KNF NEUBERGER
Flow: 0 us gal/min - 100 us gal/min
Pressure: 7 bar
Head: 70 m
... SANDPIPER 1½" S15 Non-Metallic AODD Pump provides unsurpassed fluid containment in the event a diaphragm is breached. This leak-free pump is designed to be driven by compressed air or nitrogen. Why ...
WARREN RUPP
Flow: 0.1 us gal/min - 1,050 us gal/min
Pressure: 15 psi - 600 psi
Power: 0.5 ch - 5 ch
... eliminating hazardous work place conditions and protecting the environment • No mechanical seals are used, eliminating costly repairs • Pulsation-free, low shear pumping action maintains product integrity • No vapor ...
NOV Inc.
Flow: 0 us gal/min - 45,000 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
2000 pumps set the standard in positive displacement pumping applications. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life. These ...
NOV Inc.
Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates ...
NOV Inc.
Flow: 0 l/min - 2,450 l/min
Head: 0 m - 46 m
Power: 2.2 kW - 21.3 kW
... Pumping temperature - - 0...80° C Construction Pump body - - cast iron Cover - - cast iron Impeller axial - - cast steel Impeller radial - - cast steel Shaft - - steel Optional: - - Pump ...
... specifically designed to meet process laboratory liquid handling needs. The MINIPULS 3 peristaltic pump combines microprocessor speed control with a high-torque stepper motor. Chemical-resistant pump ...
Flow: 40 m³/h - 800 m³/h
Pressure: 3 bar - 40 bar
... industrial pump range has a very high efficiency and very low NPSH. All pumps in this series are robust and easy to maintain. There are pump models in modular concept, composed with standard ...
Verder Liquids
Flow: 0 m³/h - 40 m³/h
Pressure: 0 bar - 3 bar
... centrifugal pumps of the NP60 series are a low cost industrial pump used for handling pure as well as slightly contaminated products up to 500 cP. They are often used as process pump ...
Verder Liquids
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 6 bar
... centrifugal pumps of the NP60 series are a low cost industrial pump used for handling pure as well as slightly contaminated products up to 500 cP. They are often used as process pump ...
Verder Liquids
Flow: 0.25 l/min - 0.6 l/min
Length: 95 mm
Width: 173.5 mm
# Gear pump # Performance Stable (Not easy to cut the tube) Basic Parameters Weight: 520g without any accessory Power: Input 100AC-240AC; Output DC 24V 1.9A Pump Tube: BPT-B17 6.4*9.6mm 1000H lifetime Pump ...
Flow: 0.15 l/min - 0.35 l/min
Length: 95 mm
Width: 173.8 mm
... Adjustable flow rate (150~350ml/min) # Gear pump # Performance Stable (Not easy to cut the tube) Basic Parameters Weight: 520g (without any accessory) Pump Tube: BPT-B16 3.2*6.4mm 1000H lifetime Pump ...
Flow: 380 l/h - 660 l/h
Pressure: -0.082 MPa - 0.1 MPa
KVP8 plus mini diaphragm pump design on volumetric principle, Which control the diaphragm inlet and outlet to form the power drive after the drive mechanism to promote the piston reciprocating motion, ...
Flow: 250 l/min - 650 l/min
Head: 11 m - 24 m
Power: 0.37 kW - 3 kW
Selfpriming jet water pumps with a very high hydraulic performance and a considerable capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water ...
Flow: 50 l/min
Head: 38, 42, 46 m
Power: 0.6, 0.75, 0.7 kW
... water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for drinkable water, ...
Flow: 250 l/min - 650 l/min
Head: 11 mm - 24 mm
Power: 0.5 W - 4 W
Selfpriming jet water pumps with a very high hydraulic performance and a considerable capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water ...
Flow: 7 l/min
Length: 120 mm
Width: 60 mm
DC motor driven MR-6B : Pressure type MR-6BS : Vacuum type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. • ...
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil ...
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...
Argal Pumps
Flow: 52 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... technology, ASTRAevo FOOD is a recent project too, conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, reducing at the lowest the maintenance necessities, ...
Argal Pumps
Flow: 0 m³/h - 14 m³/h
Pressure: 8 bar
Head: 12, 18 m
Small magnetic pumps for applications of recirculation, filtration, mixing of the clean and corrosive liquids. They can also work in dangerous atmospheres with the risk of explosion. Close-coupled ...
Argal Pumps
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg
Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg
Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 12 kg
rofessional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 14 l/min
... with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it is not properly cleaned ...
Flow: 1.2 m³/h - 420 m³/h
Pressure: 16 bar
... assembled by DAB, is a circulating pump, suitable for civil and industrial installations for heating and airconditioning hot water for domestic applications. This device consists of in line connections, and features a ...
DAB
Flow: 0.0012 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 8.9 W
Compact hermetic pump for continuous dosage The micro annular gear pump mzr-2961 is suitable for handling crystallizing, oxygen or moisture sensitive ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
Compact hermetic pump for diskrete dosage The micro annular gear pump mzr-2965 is suitable for handling crystallizing, oxygen or moisture sensitive ...
HNP Mikrosysteme GmbH
Flow: 0.0048 l/min - 0.072 l/min
Pressure: 0 bar - 5 bar
Power: 8.9 W
Compact hermetic pump for continuous dosage The micro annular gear pump mzr-4661 is suitable for handling crystallizing, oxygen or moisture sensitive ...
HNP Mikrosysteme GmbH
Flow: 1 l/min - 20 l/min
Pressure: 100 bar
Fluid temperature: 135 °C
... the sealing allows for a very rapid replacement without disassembling the pump during maintenance work. Centering pins increase precision during the assembly phase. This pump can also be ordered in ...
Flow: 0 m³/h - 27 m³/h
Head: 1 m - 20 m
Power: 0.12 kW - 4 kW
CTM MAGNETIC DRIVE PUMPS CTM is a compact close coupled pump perfect for service in little spaces like in OEM installations. Tapflo CTM magnetic drive pumps are centrifugal ...
Flow: 45 m³/h
Pressure: 8 bar
Head: 24 m
These pumps combine the advantages of an open impeller with those of the AISI 316 stainless steel construction, which is particularly suited for handling moderately aggressive liquids with suspended solids.
LOWARA
Flow: 0 m³/h - 115 m³/h
Pressure: 32, 26, 25 bar
Head: 3.7 m - 326.3 m
Franklin Electric Vertical multistage pumps are the silent partner of your daily life. The pumps are available in different metallurgies (Cast Iron, 304SS, 316SS) and in different head and flow rates. Robustness ...
Flow: 8, 10 us gal/h
Constructed of sturdy ABS plastic with comfort grip handle providing smooth, firm strokes. Available in 24" (610 mm) with hose and 48" (1220 mm) with hose.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining