ISO valves

DN: 6 mm - 300 mm
Pressure: 20 bar

... The two-way valve bodies have one single valve seat and are made of forged stainless steel material. They are available with weld ends or clamps according to the standards (DIN 11850, ISO 4200/1127, ...

DN: 6 mm - 300 mm

... T and Y shaped valves only have one single seat but allow more complicated process flows and distributions than two-way valves. SISTO-CT and SISTO-CY valve bodies are manufactured from solid bar stainless ...

DN: 6 mm - 150 mm
Pressure: 20 bar

... Multiport valve blocks are often installed when complex solutions in process engineering systems are required. Compared with welded designs, these valves require minimal space and are optimised to prevent deadleg. The ...

DN: 40, 100, 50, 65, 80 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 60 °C

... Butterfly valve with multi-volt electric actuator 90-240 V AC 50-60 Hz. The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications. In addition to the manually ...

DN: 40 mm - 400 mm
Pressure: 8, 10 bar
Temperature: -40 °C - 140 °C

... special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation. For DN 250÷400 valves, the drilling pattern for the self-centring system is of the traditional ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 100 °C

... BLOCK® ball valve with female ends for solvent welding, metric series with electric actuator 24 V AC/DC "T" ball, configuration 1. FIP has developed a TKD DUAL BLOCK® ball valve to introduce a high reference standard ...

DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -5 °C - 175 °C

... Connection Type: Thread, Socket weld and Butt weld ends available ISO 5211 Mounting Pad- High position pad Locking Device: Valve operated locking in open or closed position Valves inspected and tested ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 69 bar
Temperature: -18 °C - 260 °C

... Technical Data • - ISO 5211 Direct Mounting Pad • - Full Port • - Investment Casting • - Design: ASME B16.34 • - Valves Inspected & Tested according to API 598 Standard Material: EN10213-1.4408 , EN10213-1.4308 , EN10213-1.4409 ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 140 °C

... The aseptic right angle valve type 6051 with EHEDG-Certification and integrated positioner type 8049 is perfectly suitable for applications in pharmaceutical and food processing industry as well as in the biotechnology and cosmetics. ...

DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C

... control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications ...

DN: 15 mm - 80 mm
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 220 °C

... Compact flanged angle seat motor valve for on/off- and modulating operation for neutral and aggressive media. Size: DN 15 - DN 80 Pressure: PN 40, ANSI #150, ANSI #300 Material: Stainless steel 1.4408 ...

DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 185 °C

... The pneumatically operated GEMÜ S40 globe valve is designed for use in industrial applications and has body configurations such as angled and straight seat bodies. The valve spindle is sealed by a self-adjusting seal ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

... Globe valve - 507 The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing ...

DN: 4 mm - 25 mm
Pressure: 0 bar - 8 bar
Temperature: -10 °C - 100 °C

... Diaphragm valve - 650TL Diaphragm valve GEMÜ 650TL is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is via a stainless ...

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...

DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C

... 1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -29 °C - 175 °C

... 2 PIECES ATEX BALL VALVE - FEMALE / FEMALE BSP OR NPT - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...

DN: 3.175 mm - 25.4 mm
Pressure: 0 bar - 1,379 bar
Temperature: 0 °C - 538 °C

... Duplex, Monel & Hastalloys in forged & bar stock construction. Variety of end connections: Male & Female NPT, BSPP, BSPT, ISO tapered pipe ends & PANAM® tube fittings Non-Rotating vee tip / Ball tip provides repetitive & leak tight ...

DN: 2.5 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

... butterfly valve? 1．Set auxiliary screw at proper place, to regulate distance between two flanges or groove faces. 2．For wafer butterfly valve, insert the valve and screw on the rest bolts, align ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Temperature: -15 °C - 150 °C

... Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion. Best suitable for industries such as chemicals, medical care, semiconductor manufacturing, solar battery and secondary battery etc. All parts are oil-free ...

DN: 6, 4, 10, 8, 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 80 °C

... types of package are available. Standard package and Clean room package that items are washed by clean air, then packed in ISO class 6 equivalent clean room are available. The thread specification can be chosen from Sealock treatment ...

DN: 12, 10, 4, 8, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 80 °C

... types of package are available. Standard package and Clean-room package that items are washed by clean air, then packed in ISO class 6 equivalent cleanroom are available. The screw specification can be chosen from Sealock treatment ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 , ANSI B16.10 , ends weld ASME B16.25 . The company Di Nicola produces non-standard at the request of customers . The gate valve ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... butterfly valves answer to major international standards such as EN 593 , EN ISO 1074-1 , EN ISO 1074-2 , DIN 3202 , BS 5150 , ISO 5752 , ASME B16.10 and AWWA C - 504 . With marked according ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the ...

DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C

... Ifs a Safety Device in according with Directives ATEX 2014/34/EU. ISO EN 13616-1. Technical Norm Fire Prevention 41/256 31/10/2019. d.P.R. 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible ...

DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C

... It's a Safety Device in according with Directives ATEX 2014/34/EU. ISO EN 13616-1. Technical Norm Fire Prévention 41/256 31/10/2019. d.P.R 10/520 19/03/1955 and subséquent amendments. Valve is used to prevent any possible ...

DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C

... It's a Safety Device in according with Directives ATEX 2014/34/EU. ISO EN 13616-1, Technical Norm Fire Prévention 41/256 31/10/2019. d P.R. 10/520 19/03/1955 and subseguent amendments. Valve is used to prevent any possible ...

DN: 63 mm - 100 mm

... Availability: High

Features / technical specifications

• Line: ISO-K
• Line type: ISO
• Product type: Inline manual ball valve
• Seals: Teflon® (PTFE)
• Actuation:

DN: 16, 38, 63 mm
Temperature: -200 °C - 860 °C

... Pneumatic valve with bellows plug, actuated pneumatically; the 90° angle allows replacement with an elbow or tee fitting. Valve body in AISI 304 and seals in Fluoroelastomer (FKM), natural finish.

Variants / ...

DN: 63, 100 mm
Temperature: -200 °C - 860 °C

... Manual 90° ISO-K valve with bellows shutter, designed for manual flow control in systems with ISO-K flanges. The 90° angle allows replacement with elbow or tee fittings; body in AISI 304 and seals in ...

DN: 50 mm - 1,200 mm
Pressure: 6 bar - 16 bar
Temperature: -60 °C - 200 °C

... Industrial Applications of PTFE Coated Valves Butterly valve lined with PTFE/PFA or mod. PTFE/PFA for high chemical demands. To shut off and control corrosive and abrasive liquids or gases. face to face : ISO ...

DN: 80 mm - 1,200 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -50 °C - 220 °C

... 607, BS EN ISO 10497 Top flange conform to : ISO 5211 Connection flange : ASME B16.5, AMSE B16.47, EN 1092 Face to face conform to : EN 558, API 609, MSS SP-68 Test standard conform to : EN12266, ...

DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C

... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C

... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing ...

DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

DN: 25 mm
Pressure: 40, 25, 16 bar
Temperature: -20 °C - 120 °C

... Ball valves, unlike the types of valves previously mentioned, use an opening and closing action. Thanks to a specific valve, moreover, it performs a rotation limited to an angle of 90°. Ball valves ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

... Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) - Central heating ...

DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C

... non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves in general Quick ...

DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

... non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves in general Quick ...

DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C

... non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in general Valves in general Quick ...

DN: 0.5 in - 4 in
Temperature: -30 °C - 200 °C

... Flange end) Pressure Class - 150# Design Standard - ASME B16.10, ASME B16.25, ASME B16.34 ASME B16.5, API 598, BS EN ISO 17292, ISO 5211 Body Material - CF8 / CF8M / WCB / CF3M Tail Piece Material - CF8 / CF8M / WCB ...

DN: 15 mm - 100 mm
Temperature: -30 °C - 200 °C

... Face to Face: - MFG. Standard Pressure Class: - 150# Design Standard: - ASME B16.ll, ASME B16.34, API 598, BS EN ISO 17292, ISO 5211 Body Material: - CF8 / CF8M / WCB / CF3M Bail Material: - CF8 / CF8M Body Seal ...

DN: 0.5 in - 4 in
Temperature: -30 °C - 200 °C

... Flange end) Pressure Class - 150# Design Standard - ASME B16.10, ASME B16.25, ASME B16.34 ASME B16.5, API 598, BS EN ISO 17292, ISO 5211 Body Material - CF8 / CF8M / WCB / CF3M Tail Piece Material - CF8 / CF8M / WCB ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating pilot ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may open gradually ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until ...