Saws

Circular saw blade diameter: 230, 355 mm
Round piece diameter: 76, 85 mm

... HAZ) on the boiler tubes of the water wall panels, the sawing of the defective panel wall tubes should be done not by flame cutting but instead with the BWC cutting system, that uses abrasive saws. The system increases ...

Circular saw blade diameter: 500, 550 mm

... The KP 500 Automatic crosscut saw is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 15–18 m³ of pallet lumber or approximately ...

Circular saw blade diameter: 550, 500 mm

... assortment. On average, this saw can process 300 bm/hour (for material 4 m long with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The KP 500 Optim optimization ...

Circular saw blade diameter: 600, 550 mm

... The crosscut saw KP 900 EasyCut is an ideal solution for businesses processing solid wood, emphasizing maximum quality and yield of their production. It's designed for cutting out defects and optimizing lengths. On average, this saw ...

Circular saw blade diameter: 350, 250 mm

... compromises, especially when it comes to the sawing equipment. Everyone knows how quickly an expensive sheet can be completely ruined by an inaccurate cut. However, accurate sawing begins with the alignment of the saw. With ...

... When it comes to cross cut sawing too, cleanliness and protection against shavings are of the utmost importance. The BREYER cutting saw also impresses with individual suction devices both above and below the sheet. Your ...

Circular saw blade diameter: 400, 450 mm

... shoulder of the cut Rapid and automatic format adjustment Fast and safe exchange of saw blade Speed control Precise and rectangular cut High safety standard Efficient saw dust extraction above and below sheet Operating ...

Round piece diameter: 6 mm - 120 mm

... pipe bends from 30.00 mm to 120.00 mm using a second saw blade holder.
Simple and safe operation

• Integrated line laser for marking cut position.
• Feed and sawing in a single operation

... The robust and established alternative in metal housing. Very popular due to the high tractive power of the reciprocating engine. Technical Data Order number : 150322890 Power [W] : 300 Air consumption [l/min] : 250 Vibrations [m/s²] : 16,7 Valve ...

High power device in a robust aluminum housing with handy Shape.

Gentle work due to patented vibration damping. More power produced by new drive. Also suitable for harder steel. Exceptionally robust because of the stable aluminium housing.

Circular saw blade diameter: 700 mm - 700 mm

... workpiece hold

Standard Accessories

• Supplied with Ø700 mm saw blade and 4.0 kW motor
• Spray lubrication system for the saw blade
• MKN 301 roller conveyor (3 m)
• 2

Circular saw blade diameter: 420 mm - 420 mm

... br>

• Hydraulic control unit for saw head feed
• Special miter for longitudinal cutting operations
• DKN 602 length stop
• Connection kit for DKN and MKN length stops
• Spare Ø420 mm saw blade

Circular saw blade diameter: 400 mm

... Standard accessories

• Ø 400 mm saw blade
• 2 x manual horizontal clamps (KD 400 D)
• 2 x pneumatic horizontal clamps (KD 400 PS)
• Air gun (KD 400 PS)
• Spray saw blade lubrication

... Silent cutting swarfless when cutting Polyolefines. Parting and chamfer tools when chamfer is required. Travelling carriage without electronic synchronization or operator adjustment. Universal clamps self-centering do not require changing for each ...

... A single set of cut and chamfer tooling, ensures the cut on the profile and required dimensions; One single disc is responsible for the cutting of the total thickness of the pipe and one or two chamfer tools for chamfering, all supported on the same ...

Circular saw blade diameter: 300, 400, 500, 650, 800 mm
Round piece diameter: 10 mm - 315 mm

... sides of the blade block. Saw blade cuts from below and upward through the profile, providing a clean and precise cut. Servo Saw Cutting Technology A range of versatile traveling saw cutting machines. ...

... Short description

• Hand-operated metal circular saw BEWO CPO-315 LT, built for industrial cutting of steel, stainless steel (RVS) and aluminium; made in the Netherlands.

• Cutting

... Bewo CPO 315 metal circular saw — overview

• Hand-operated metal circular saw designed for precise cutting of steel, stainless steel and aluminium depending on the configuration.
• Industrial heavy-duty

... metals

Product description
The Bewo CPO-315 is the benchmark for reliable manual metal circular saws. Designed to cut steel, stainless steel (RVS) or aluminium depending on the selected version. LT version ...

... through pneumatic downwards blast · Optional chip conveyor · Automatic unloading with optional rim transfer device between sawing and pin/sleeve joining machines Technical specifications: · Range: 20“ to 29“ · Production capacity: ...

... The RAMI YOKOTA's Red Rooster jig saws (RRI-8100) are mainly used for metal and wood working applications. They utilize the SDS-Clic system, and are commonly used for coach-work building. They operate with minimal vibration levels, and ...

... SIGMA 800 PRO is the new band saw designed for cutting PE, PP, PVDF, and PVC pipes with diameters up to 800 mm. It allows both straight and angled cuts ranging from -30° to +30°. For angle cuts from -45° to + 67.5° up to a diameter of ...

... SIGMA 1200 PRO and SIGMA 1600 PRO are electric workshop band saw machines, for plastic pipes up to 1290 and 1702 mm. They're the ideal equipment to match Alfa fittings fabrication machines. Both the preparation and cutting phases are ...

... USER FRIENDLY Patent pending With the aim of combining these two aspects Ritmo developed an innovative portable pipe saw for jobsite pipe cutting. Whatever the job-site conditions are and wherever the pipe is located, TOPGEAR ...

Circular saw blade diameter: 600 mm - 1,200 mm

... Overview
The FAST 2 is a thin veneer cutting machine equipped with two diamond in-line blades, capable of mounting blades of different diameters on the same spindle. It is designed for continuous production and for multi-product or multi-material ...

Circular saw blade diameter: 600 mm - 1,200 mm

Overview The Fast 3 is a thin veneer cutting machine equipped with three diamond in-line blades and the capability to mount blades of different diameters on the same spindle. It is engineered for continuous production and for producing multiple ...

Circular saw blade diameter: 600 mm - 1,200 mm

... Overview
Fast 5 is an inline five-disc saw designed for high-productivity cutting of stone and concrete. The machine integrates a pressure bar that permits successive loading of workpieces with up to 12 cm thickness variation ...

Circular saw blade diameter: 180 mm
Round piece diameter: 35 mm

... SMOOTH BENDING SYSTEM. 90° CUT. CLEAN CUT. DIAMOND BLADE. DUST COLLECTOR. CAPACITY 1 1/4″ 2SP – 1” 4SP VOLTAGE SAW 54V CUTTING DISC Diamond blade Ø 190 mm MAX. HOSE OD 35 mm ROTATION SPEED 5 800 rpm AVAILABLE AS: VERSION ON ...

Circular saw blade diameter: 254 mm
Round piece diameter: max 50.0 mm

... SMOOTH BENDING SYSTEM. 90° CUT. CLEAN CUT. SCALLOPED BLADE. DUST COLLECTOR. MULTIPLE VOLTAGE OPTIONS. Capacity: 1 1/4″ 4SP Motor: 2,2kW Cutting disc: Scalloped blade Ø 254 mm Max. hose OD: 50 mm Rotation speed: 3000 rpm ...

Circular saw blade diameter: 254 mm
Round piece diameter: max 50.0 mm

... The S Cut 22 - FC 32 model is a hose cutting saw developed by Techmaflex. This saw has a capacity of 1ʺ 1/4 4SP and it uses a motor with 2.2 kW. In addition, it is equipped with a scalloped cutting disc with a diameter ...

Circular saw blade diameter: 450, 400, 350 mm

... Professional stone saw for tilted cuts designed to work slabs "face down", it allows to perform perfect 45 degree cutting even on uncalibrated slabs. No width limitation of the slab to process; even the most narrow strips can be machined ...

Circular saw blade diameter: 250 mm - 500 mm

... motorized bridge saw combines the essentiality of a basic saw with the sturdiness of a massive frame allowing to feature pop-up rollers on the worktable for easy slab positioning. Advantages TFR-A is a sturdy and ...

Circular saw blade diameter: 250, 300, 350 mm

... Wet cut sliding compound miter saw for straight, bevel, plunge and miter cuts in all directions. Study structure made of galvanized steel to cut all types of stone. Advantages Sliding compound miter saw for angle ...

Circular saw blade diameter: 300 mm
Round piece diameter: 100, 80, 85, 60 mm

... •Aluminium saw •Caracteristics: •Easily carried, this machine is provided with a Ø300mm. ascending widia disc. Turning from 0 to 45º to the right and to the left. •Manual clamp. OPTIONS: •Turning base •Set of guiding bars (optional). PACKAGING ...

Circular saw blade diameter: 350 mm
Round piece diameter: 125, 120 mm

... - Aluminium saw - Caracteristics: - Easily carried, this machine is provided with a Ø300mm. ascending widia disc. Turning from 0 to 45º to the right and to the left. - Manual clamp. OPTIONS: - Turning base ...

Circular saw blade diameter: 350 mm
Round piece diameter: 120, 125 mm

... •Aluminium saw •Caracteristics: •Easily carried, this machine is provided with a Ø300mm. ascending widia disc. Turning from 0 to 45º to the right and to the left. •Manual clamp. •Turning base •Set of guiding bars (optional). PACKAGING ...

... pistons - Practical adjustment of the rotary mechanical stop group - Left profile support table Saw - Two Ø 200 mm saws - Two 45° Ø 95 mm saws - Saw speed of 2800 RPM Safety - ...

... measurement transfer to a machine 100 m away via radiofrequency signal - Ethernet connection Saw - Two Ø 200 mm saws - Two 45° Ø 95 mm saws - Saw speed at 2800 RPM Safety - ...

... savings using a rotary table - Profile support table with manual measuring system - Left profile support table Saw - Ø 400 mm saw Manual Angle Adjustment - Practically positioned at 5° intervals. Safety - ...

Circular saw blade diameter: 160 mm - 180 mm
Round piece diameter: 320 mm - 620 mm

... Pipe sawing machine has been developed to easily and quickly set a pipe to the correct length, clamp it and cut the pipe using a carbide saw blade. Through the control, a pneumatic/hydraulic pressure cylinder ensures ...

Circular saw blade diameter: 520 mm
Round piece diameter: 3 in

... Cutting machine - EM 115 The EM 115 is a highly productive hose cutting machine. The machine is best suited for high volume manufacturing of 2" hoses along with workshop capability for 3" high pressure hose and 3" industrial hose. Unique drive motor ...

... Hose cutting machine - EM 3 series For each type of workshop: This cutting machine with its 3 kW drive is also available as an ecoline or DC variant. For hydraulic hoses up to 1 ¼”. Unique drive motor with double bearings and oversized shafts •Reduce ...

Circular saw blade diameter: 400 mm
Round piece diameter: 2 in

... Hose cutting machine - EM 8 series This production cutting machine is available as a manual and as a pneumatic variant. Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies ...

Round piece diameter: 1,200, 1,000, 720, 550 mm
Blade length: 6,800, 9,300, 11,000, 12,300 mm
Blade width: 41, 54, 67 mm

... HORIZONTAL BANDSAW MACHINES Automatic machines for bars Robust and reliable saws for steel, capable of enviable performance thanks to the studies carried out on the high-speed cutting of high tensile alloys, hardened and chromed steels. ...

Blade length: 3,600, 5,060, 6,500, 5,200 mm
Blade width: 20 mm

... VERTICAL CONTOUS SAWS Universal machines for a myriad of possible uses Versatile and robust bandsawing machines, machines made to last. ...

Blade length: 5,060, 6,500, 5,200, 7,350 mm
Blade width: 20, 34, 41 mm

... VERTICAL SAWS MOVING TABLE Universal machines for a myriad of possible uses Versatile and robust bandsawing machines, machines made to last. ...

Round piece diameter: 220, 150, 90 mm

... Gravitational bandsaw for cuts from 0° to 60° right. Head structure in cast iron. Hydraulic transducer for blade tension display. Head handle with control button. Adjustable blade guide with carbide inserts and guide bearings. Possibility to perform single ...

Round piece diameter: 150, 220, 90 mm

... Manual bandsaw to cut from 0° to 60° right (Manual or gravitational for +G versions). Head structure in special aluminium alloy. Dynamometric band tension device. Head handle with control button. Adjustable blade guide with carbide inserts and guide bearings. Reduction ...

Round piece diameter: 100, 180, 200, 140 mm

... Manual bandsaw to cut from 0° to 60° right and 45° left (Manual or gravitational for +G versions). Head structure in special high-resistance aluminium casting alloy. Reduction gearbox with case-hardened, ground, helical gears lubricated with long-life ...

... Designed for skid steer mounting, Simex RW and RWA wheel saws provide different solutions for working on hard or compact surfaces such as asphalt, cement and rock: cutting and narrow trenches, set-section trenches, mini- and micro-trenches ...

... characteristics of the prime mover suit the weight and specifications of the attachment (2) With a 25 mm wheel saw width. (3) With a 80 mm wheel saw width. Simex does not accept responsibility or liability for the ...

... Designed for skid steer mounting, Simex RW and RWA wheel saws provide different solutions for working on hard or compact surfaces such as asphalt, cement and rock: cutting and narrow trenches, set-section trenches, mini- and micro-trenches ...

Circular saw blade diameter: 6 in - 16 in

... machine. It cuts at a low operating temperature of 55° for steel based materials. It is conducive to using under water. The saw band that performs the cutting operation is manipulated with the aid of deflection pulleys. The shifting of ...

Round piece diameter: 16 mm - 2,000 mm

... Planetary saws, equipped with disk and milling cutter for cut and chamfering of PVC pipes (rigid and foam) or other plastic materials. Swift replacement of tools, even with pipe in movement; Pipe blocking vices or universal ...

Round piece diameter: 25 mm - 200 mm

... recycled; • - Low noise level, machine and pipe remain cleaner, higher reliability, minimal maintenance. • - High speed saw with double cutting trolley; • - Possibility to double the production; • - Particularly indicated for the ...

Round piece diameter: 16 mm - 160 mm

... "SATELLITE" CUT for PP-R, PVC and PE pipes. Automatic synchronisation with extrusion speed; Pipe remains totally clean. The cut is effected without material removal and thus generates neither dust nor chips nor noise; On request: chamfering ...