Voltage output torque sensors

Torque: 500 Nm - 10,000 Nm
Precision: 0.02 %
Rotational speed: 0 rpm - 25,000 rpm

... The DF ibex series are torque measuring flanges and torque meters engineered for rotating applications. They integrate true strain‑gauge amplifiers in the rotor electronics to provide direct torque measurement ...

Torque: 500 Nm - 10,000 Nm
Precision: 0.04 %
Rotational speed: 0 rpm - 25,000 rpm

... high speed and accurate dynamic torque measurement are required.

Key features

• Rotating torque measuring flange designed for drivetrain and test-bench use
• Innovative mechanical and sensor

Torque: 100 Nm - 10,000 Nm
Precision: 0.04 %
Rotational speed: 0 rpm - 40,000 rpm

... DF plus series torque transducers are torque measuring flanges and torque meters that integrate true strain gauge amplifiers in the rotor electronics to deliver high-precision torque ...

Torque: 50 Nm - 120,000 Nm
Precision: 0.1, 0.05 %
Rotational speed: 0 rpm - 30,000 rpm

... Overview
The F series torque transducers are torque measuring flanges engineered for optical data transmission and reliable two-range torque measurement. They are designed to ...

Torque: 50 Nm - 200 Nm
Precision: 0.05 %
Rotational speed: 0 rpm - 40,000 rpm

... Fast-rotating torque transducers are high-speed torque flanges designed for highly dynamic torque measurement and control tasks, particularly in e-mobility testing and drivetrain validation. ...

Torque: 5 Nm - 50 Nm
Precision: 0.03 %
Rotational speed: 0 rpm - 32,000 rpm

... Overview

The RT11 series torque transducers and torque flanges provide precise torque measurement at the lower end of ATESTEO's measuring range. They are specifically intended ...

Torque: 0 Nm - 1,000 Nm
Rotational speed: 0 rpm - 25,000 rpm

... Purpose: torque measuring flange and transducer system for drivetrain and component testing

Torque: 5 Nm - 20 Nm
Precision: 0.05 %
Rotational speed: 0 rpm - 20,000 rpm

... Function: torque measurement (shaft-based torque meter)

• Torque

Torque: 50 Nm - 400 Nm
Precision: 0.1 %

... Overview
The measurement steering wheel is a torque sensor assembly designed to measure steering torque directly at the vehicle steering wheel. It enables direct measurement of steering torque, ...

Torque: 0.35 Nm - 20 Nm
Precision: 0.1 %
Overload limit: 150 %

... Series torque load cells are full bridge strain gauged load cells used exclusively with the DFS-R-ND Series torque gauges. The STS Series torque load cells ...

Torque: 200 Nm - 100,000 Nm
Precision: 0.05, 0.2 %
Overload limit: 0 % - 400 %

... 100 Series Reaction Torque Sensor has many favorable features. Based on strain-gauge technology, the RT Sensor provides highly accurate signal transmission. The RT 100 Series Torque Sensor ...

Torque: 0.5 Nm - 1,000 Nm
Precision: 0.5 %
Rotational speed: 0 rpm - 22,000 rpm

... Torque ranges from 0,5 to 1000 Nm Features • Low-Cost Torque transducer • Current output and voltage output • Very short • Measurement accuracy: ...

Torque: 0 Nm - 5,000 Nm
Precision: 0.1 %
Rotational speed: 0 rpm - 36,000 rpm

... 2-range- torque transducer "DRDL" Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% overload protection 16 ...

Torque: 0.5 Nm - 1,000 Nm
Precision: 0.25 %
Rotational speed: 0 rpm - 25,000 rpm

... Torque ranges from 0,5 Nm to 1000 Nm • current and voltage output • measurement accuracy ≤ 0.25% • contactless signal transmission • proven strain gauge technology • built-in signal amplifier • ...

Torque: 0 Nm - 10,000 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 12,000 rpm

... and to sense loosening torques, etc. lt can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

... Torque sensor "DRFS ¼" hexagonal drive 7 Measurement range from ± 0 - 1 Nm up to ± 0 - 20 Nm optionally with angle measurement Features: • No service needed because of contactless data acquisition • High accuracy ...

Torque: 0 Nm - 20 Nm
Precision: 0.15 %
Rotational speed: 0 rpm - 10,000 rpm

... Torque sensor with quick-change chuck "DRFSk" hexagonal drive very short construction 6 torque range from ± 0 - 2 Nm to ± 0 - 20 Nm rotation angle measurement option Features • No service ...

Torque: 0 Nm - 50 Nm
Precision: 0.15 %
Overload limit: 100 %

... : 0,5 - 20 Nm DRDMS: 0,5 - 20 Nm DRDMN: 10 - 50 Nm With mechanical coupling for maxon gears. As a complete drive and torque measuring unit. For Test bench construction and Bolting technology ...

Torque: 1,800 Nm
Precision: 0.2 %
Rotational speed: 0 rpm - 2,000 rpm

... amplifier • rotation angle measurement (optional) • extended EMC strength • adjustable output level of angle signal (5V-24V) • Frequency output 10kHz ±5kHz • large input voltage ...

Torque: 0 Nm - 6,000 Nm
Precision: 0.1 %
Overload limit: 50 % - 100 %

... Reaction torque transducer "DRT" 16 Measureing range between ± 0 - 2 Nm to± 0 - 6000 Nm • for static use • active and passive execution • optionally with bracket Features • Pulse screwdriver suitable.  ...

Torque: 0 Nm - 1 Nm
Precision: 0.15 %
Overload limit: 100 % - 400 %

... Torque sensor for the smallest torques "DRB-I" 3 torque range from ± 0 - 0,02 Nm to ± 0 - 1 Nm • Suitable for very low torques. • Not impacted by axial and ...