video corpo

Rotary pump R
beveragepaintfor dairy products

rotary pump
rotary pump
Add to favorites
Compare this product
 

Characteristics

Fluid
paint, beverage, for dairy products, oil
Operation
electric
Technology
centrifugal
Mobility
stationary
Domain
for the chemical industry, for the pharmaceutical industry, for the food and beverage industry, sanitary
Applications
handling
Material
stainless steel
Protection level
robust
Other characteristics
rotary
Flow

Min.: 0.57 m³/h
(20.12936 ft³/h)

Max.: 45.4 m³/h
(1,603.28587 ft³/h)

Pressure

6.8 bar
(98.626 psi)

Power

Min.: 0 kW
(0 hp)

Max.: 22.4 kW
(30.46 hp)

Fluid temperature

21 °C
(69.8 °F)

Description

The R-series pump is ideal for the type of application where pumps with metal rotors will not work effectively. When you need to strip clean your pump because the product will not wash out by using a normal CIP process such as meat processing, the R pump overcomes this problem by its simple robust design. The R pump design utilities a floating rotor without rotor nuts. Rotors are interchangeable and can only be fitted in one position due to a specially modified square shaft. This simple and robust design allows for all sanitary parts to be changed in minutes without removing the pump from the line. The pumps are now fitted with an 'O' ring front cover gasket, making routine maintenance even easier. SPX FLOW uses multi-lobe rubber rotors (twin lobe on the RO) as standard. These deliver very high efficiency for the handling of a wide range of difficult and abrasive products. As a strip clean unit the simple rubber lip seal is front loaded for easy replacement. For special applications a range of metal or plastic rotors in several different profiles can be supplied, which are ideal for abrasive or corrosive products. R-series pumps can be fitted with enlarged rectangular inlets for meat and dough slurries. Additionally, if entrapped air is a problem, special de-gassing front covers can be used, enabling entrapped air to be removed prior to cooking or processing. If you have a problem with fitting a pump beneath your tank or hopper a front cover outlet can be supplied. For higher discharge applications a cover with outrigger bearings is available.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.