Robust output module DP-34044-7-000

CANSAE J19398-O

The PVE output module has been specially developed to control Danfoss® PVG valves . It can be operated on SAE J1939 networks. The module enables a total of 8x PVE (PVEA, PVEH, PVES) or 6x PVEO actuators to be controlled. The temporary total current is 26 A.. Mechanical Data Dimensions - 97 x 265 x 34 mm Weight - 680 g Material (Housing) - PA, reinforced Power Connector - DT-18 (A-cod.) IO connector - DT-4 Electrical Data Operating Voltage - 8 … 32 V DC Operating Current per Contact / Potential (max.) - 13 A Sum Current (max.) - 39 A Supply Protection - Reverse polarity protection Block diagnoses - Undervoltage | Overvoltage | Overtemperature LED Indicators - Power: blue | Bus: green | Status: green | Actuator Power: blue | Signal: yellow | Error: red Outputs PVE Mode - PVEA, PVEH, PVES, (PVEO) Output Protection - Overload | Short Circuit Output Diagnoses - Actual Current | Overcurrent | Short Circuit Environmental Conditions Ambient temperature - -40 °C…+80 °C Storage temperature - -40 °C…+85 °C Standards & Approvals EMC - ISO 13766-1 | ISO 13766-2 | EN 13309 Suitable For: - CCpilot V1200, xtremeDBmini, CCpilot V700, CCpilot V1000 Product Family: - xtremeDB Port Number: - 8 Connection: - DT-4, DT-18 Baudrate: - 250, 500 kbit/s Output Signal Type: - PVG [3 A], PVEA, PVEH, PVES, PVEO Auxiliary Voltage: - 8 … 32 V DC Housing Material: - Polyamide, reinforced Operating Temperature: - -40°C ... +80°C Mounting system: - 2x 6 mm round hole + 1x slotted hole Standards / Approvals: - ISO 13309, EN ISO 13766-1, EN ISO 13766-2