Cartridge valve HSPEC10-34

hydraulicflow controlflow control

SOLENOID PROPORTIONAL FLOW CONTROL VALVE, POPPET, NORMALLY CLOSED, PRESSURE COMPENSATED The HSPEC10-34X is a high pressure, proportional solenoid-operated, poppet type, restrictive type, pressure compensated, normally closed flow control, screw-in hydraulic cartridge valve with built-in damping and load holding features. Operation With inlet at port 3 the valve will regulate flow out of port 2 regardless of load pressure with flow rate proportional to current applied to the solenoid. Port 1 must be connected to port 3 to provide load sense function for the compensator. When de-energized, the valve blocks flow from port 3 to port 2 while allowing free flow in opposite direction. Note: Do not use an orifice disc wth this product. Features Industry-common cavity. Continuous-duty rated coils. Reduced manifold space claim. Efficient wet-armature construction. Optional waterproof E-Coils rated up to IP69K. Patented high-strength solenoid tube All HyPerformance™ valves are tested to the rigorous standards of NFPA specification T2.6.1 and are tested at a verification level of 90% and an assurance of 99% Fluids: Mineral based or synthetic hydraulic fluid with lubricating properties Fluid Viscosity Range: 7.4 to 420 cSt Maximum Operating Contamination Level: 18/16/13 per ISO 4406 Unit Weight: 0.19 kg (0.43 lb) HSPEC10-34 without coil and nut 0.20 kg (0.45 lb) HSPEC10-34T without coil and nut Internal Wetted Surface Area: 186.8 cm² (28.95 in²) HSPEC10-34 191.2 cm² (29.64 in²) HSPEC10-34T Cavity: HVC10-3 10-size 3-way Cavities Cartridge Installation Torque: