- Materials - Tools - Components
- Semi-finished products
- PTFE rod
- Omniseal Solutions
PTFE rod Rulon® ARsheetribbontubular
Add to favorites
Compare this product
Characteristics
- Shape
- sheet, rod, tubular, ribbon
- Protection level
- corrosion-resistant, abrasion-resistant, wear-resistant
- Other characteristics
- chemical-resistant, for high-temperature applications, low-friction, low water absorption, insulating, for cryogenic applications, high-shear, high-strength
- Length
Min.: 610 mm
(24.02 in)Max.: 3,000 mm
(118.11 in)- Width
Min.: 80 mm
(3.15 in)Max.: 1,000 mm
(39.37 in)- Diameter
Min.: 8 cm
(3.15 in)Max.: 120 cm
(47.24 in)- Thickness
Min.: 0.08 mm
(0.003 in)Max.: 6 mm
(0.236 in)
Description
Product description
Rulon® AR is a light maroon, engineered ceramic‑filled PTFE material designed for seals, bearings and bonded coatings of sliding surfaces. It is more flexible than some Rulon® grades and provides extended service life and dimensional stability in continuous dry or non‑lubricated conditions.
Performance overview
This filled PTFE combines high compressive strength, low coefficient of friction, chemical resistance and electrical insulation with excellent abrasion and corrosion resistance. It operates in a wide temperature range and can tolerate high PV conditions for many applications, with intermittent use extending allowable PV values.
Applications
Material forms and typical offerings
Standard offerings include compression‑molded bearings and components, skived sheets, stamped or machined seals, extruded shapes, rods, tubes, tapes and machined parts. The material is suitable for environments including steam, wet, dry and vacuum.
Key benefits
Performance highlights (from product charts)
Technical specifications
Rulon® AR is a light maroon, engineered ceramic‑filled PTFE material designed for seals, bearings and bonded coatings of sliding surfaces. It is more flexible than some Rulon® grades and provides extended service life and dimensional stability in continuous dry or non‑lubricated conditions.
Performance overview
This filled PTFE combines high compressive strength, low coefficient of friction, chemical resistance and electrical insulation with excellent abrasion and corrosion resistance. It operates in a wide temperature range and can tolerate high PV conditions for many applications, with intermittent use extending allowable PV values.
Applications
- Pumps
- Mixers
- Compressors
- Appliances
- Insulators
- Linear slides
- Pipe supports
- Wear bands
- Seals and bonded coatings of sliding surfaces (static and dynamic)
Material forms and typical offerings
Standard offerings include compression‑molded bearings and components, skived sheets, stamped or machined seals, extruded shapes, rods, tubes, tapes and machined parts. The material is suitable for environments including steam, wet, dry and vacuum.
Key benefits
- Low coefficient of friction
- High compressive strength
- Chemical inertness and dimensional stability in many chemicals
- Excellent abrasion and corrosion resistance
- Electrical insulation
- Long service life in non‑lubricated applications
Performance highlights (from product charts)
- Superior dry friction
- Stick/slip elimination
- Reduced hardware abrasion
- Minimal moisture absorption
- Dimensional stability in a broad range of chemicals
Technical specifications
- Materials: Light maroon fluoropolymer; engineered ceramic‑filled
- Service conditions: Temperature range -150°C to +200°C; Mechanical strength: 7 MPa
- Manufacturing process: Compression molding
- Features: Friction coefficient 0.15–0.25; Max PV (table, dry/lubricated): 0.35 MPa·m/s — note: product data indicates capability at PV values up to ~10,000 under certain intermittent conditions
- Dimensions / Forms: Rods and Tubes: (φ) 1.2 m × (L) 3 m; Sheets: (L,W) 610 mm × (φ) 80 mm; Tapes: Width 1 m × Thickness 0.08–6 mm
Catalogs
No catalogs are available for this product.
See all of Omniseal Solutions‘s catalogsExhibitions
Meet this supplier at the following exhibition(s):
Other Omniseal Solutions products
Powder Materials
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.