Series CHE is your choice when either End-Of-Stroke, mid-Stroke or continuous cylinder position indication is required and when operating pressures are up to 140 bar (depending on bore size).
Series CHD steel body cylinders are your best choice for high force requirements with operating pressures up to 207 bar. Available foot mounting with manifold ports enhances machine design flexibility. Optional End-OfStroke position indication is available
1. Select the Operating Pressure column closest to that desired.
2. In the same column, identify the force required to move the load (always rounding up). If the piston rod is in compression use the ‘Push’ row and if the piston rod is in tension use the ‘Pull’ row.
3. In the row to the left is the bore required.
If the cylinder envelope dimensions are too large for the application, increase the operating pressure to the maximum pressure in the table below, if possible, and repeat steps 1 - 3.
Standard Specifications
• 6 Standard mounting styles
• Bore sizes – 20mm to 100mm
• Piston Rod Diameter – 12mm to 56mm
• Single and double rod construction available
• Strokes up to 150mm depending on bore size (see table above).
• Working pressure up to 140 bar (depending on bore size)
• Temperature range – -23°C to +121°C (depending on seal class)
• Reference ISO 16656: 2004