Incremental rotary encoder UTD-IPH00-XXXXX-05M0-AAW

magneticsolid-shaftflange

Overview
POSITAL IXARC programmable incremental encoder POSITAL UTD-IPH00-XXXXX-05M0-AAW with Push-Pull (HTL) or RS422 (TTL) outputs. Clamp flange ø50 mm, solid shaft ø8 mm (15 mm length). Protection rating referenced as IP64/IP65 depending on configuration. Designed for industrial motion sensing, counting and position feedback applications.

Interface

• Type: Programmable incremental (PPR adjustable)
• PPR range: 1 – 32768 (PPR > 16384 requires production setup)
• Programmable parameters: PPR, output type, counting direction
• Configuration tool: UBIFAST Configuration Tool (v1.6.10 or newer)

Outputs

• Output driver: Push-Pull (HTL) or RS422 (TTL)
• Max. frequency response: 1 MHz
• Max. switching current: 50 mA per channel
• Voltage levels: HTL high >4 V (@4.75–9 V supply) or >V-3 V (@9–30 V); low <0.5 V; RS422 high >4 V; low <0.5 V

Electrical data

• Supply voltage: 4.75 – 30 VDC
• Current consumption: ≤60 mA @5 V; ≤30 mA @10 V; ≤25 mA @24 V
• Power consumption: ≤1.0 W; start-up time <1 s
• Min. load resistance: 120 Ω
• Reverse polarity and short-circuit protection included
• EMC: DIN EN 61000-6-4 (emission), DIN EN 61000-6-2 (immunity)
• MTTF: 280 years @ 40 °C

Sensor

• Technology: Magnetic
• Accuracy (INL): ±0.0878° (≤12 bit)
• Default sense: clockwise shaft movement (front view)
• Duty cycle: 180° ±12° (speed >100 RPM)
• Phase angle: 90° ±6° (speed >100 RPM)

Environmental specifications

• Protection class: IP65 (shaft and housing referenced on product page; header may reference IP64/IP65)
• Operating temperature: fixed mount down to -30 °C, flexible down to -5 °C; up to +80 °C
• Humidity: up to 98% RH, non-condensing

Mechanical data

• Housing material: Steel with cathodic corrosion protection (>720 h salt spray resistance)
• Flange: Clamp ø50 mm, material aluminum
• Shaft: Solid, single flat, ø8 mm, length 15 mm, stainless steel V2A
• Max. shaft load: axial 40 N, radial 110 N
• Rotor inertia: ≤30 gcm²; friction torque ≤3 Ncm @20 °C
• Max. mechanical speed: ≤12000 1/min
• Shock/vibration: shock ≤100 g (6 ms), permanent shock ≤10 g (16 ms), vibration ≤10 g (10–1000 Hz)
• Length: 47 mm; Weight: 780 g
• Minimum mechanical lifetime: values given per Fa/Fr conditions

Electrical connection

• Connection orientation: axial
• Cable: 10 m length, PVC, diameter 6 mm, conductor 0.14 mm² (AWG 26)
• Minimum bend radius: 46 mm fixed, 61 mm flexing
• Connection plan (signal → color): A→Green, /A→Yellow, B→Gray, /B→Pink, Z→Blue, /Z→Red, Power→Brown, GND→White, Shield→Shield

Certifications

• CE approved

Downloads & Accessories

• Datasheet, 2D drawing, 3D housing & flange drawings, CE and UL certificates (available on product page)
• Accessories examples: coupling bellows and jaws (10017239, 10017240, 10017354, 10017355)
• Configuration tool: 10026904 UBIFAST Configuration Tool
• Counters & displays: AP20 and DiMod series (see product page for part numbers)

Technical specifications (summary)

• Model: UTD-IPH00-XXXXX-05M0-AAW
• Brand: POSITAL
• Type: IXARC programmable incremental encoder
• Interface/Outputs: Programmable incremental; Push-Pull (HTL) or RS422 (TTL)
• PPR programmable: 1–32768 (production setup required if >16384)
• Supply voltage: 4.75–30 VDC; Max freq: 1 MHz; Max switching current: 50 mA/channel
• Shaft: ø8 mm, solid, single flat, length 15 mm; Flange: Clamp ø50 mm
• Protection: IP64/IP65 (page references IP65 for shaft and housing)
• Length: 47 mm; Weight: 780 g; Cable: 10 m PVC