Bimba fittings

Diameter: 3 mm - 10 mm
Operating pressure: 100, 200, 320 bar

GAUGE CONNECTION UNIONS For reliable connection of gauges Available in pressure ranges of PN 100, 200 and 320 bar Suitable for G1/2" gauge threads and all commercial types Available in DN3 to DN10 tube diameters Other thread diameters ...

Diameter: 3 mm - 50 mm
Operating pressure: 0 bar - 1,000 bar

WELD-ON TUBE UNIONS For permanent pipe connections With weld-on ends on both sides Available for tube diameters from DN3 up to DN50 Straight version, angles and Tee form Temperature-resistant from -270 °C up to +650 °C (dependent ...

Diameter: 3 mm - 50 mm
Operating pressure: 0 bar - 1,000 bar

SCREW-IN TUBE UNIONS For variable application With weld-on end and screw-in thread Available for tube diameters from DN3 up to DN50 Straight version, angles and Tee form Metric, Whitworth or NPT thread Temperature-resistant from ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar

STRAIGHT MALE ADAPTOR “UNIVERSAL SHORT” For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. ...

Diameter: 3 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar

STRAIGHT FEMALE ADAPTOR For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. It is the icon ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 20 bar

BULKHEAD CONNECTOR For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. It is the icon of ...

Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment ...

Diameter: 0.25 in
Operating pressure: 325 bar

zinc-plated. Max. operating pressure 325 bar. Since the clamping modules after blow-off of the opening pressure are mechanically locked, the hose is then uncoupled by means of the quick couplings. The advantage of this is that there ...

Diameter: 14 mm - 66 mm
Operating pressure: 10 bar

Connections - hoze nozzle – male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 10 mm - 63 mm
Operating pressure: 16 bar

Connections - solvent spigot – hose nozzle Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 16 mm - 63 mm
Operating pressure: 16 bar

Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 2 mm - 16 mm

STRAIGHT FITTINGS - BARB-STYLE CONNECTION ► For assembling with hose clips ► Straight version STRAIGHT FITTINGS - QUICK CONNECT STYLE Cost ...

Diameter: 2, 4, 6, 8 mm

ANGLED FITTINGS- BARB STYLE CONNECTION ► For assembling with hose clips ► Angled version ANGLED FITTINGS- QUICK CONNECT STYLE Cost reduction through quick assembly and disassembly Angled and swivel-mounted

Diameter: 50 mm - 150 mm

PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, based on DIN ISO 228 Description, addition to product name - PU threaded connector for all Master-PUR L, Master-PUR H and Master-PUR HX hose types, ...

Diameter: 50 mm - 150 mm

... threaded connector for attaching fittings to Master-PUR Food hoses, approved for direct food contact EU 10/2011, following DIN ISO 228 Description, addition to product name - cast-on PU threaded connector for attaching ...

Diameter: 32 mm - 300 mm

screw-on PU end fitting for Master-PUR hoses on spigots acc. to DIN 2448/DIN 2458, permanently antistatic Description, addition to product name - screw-on PU end fitting for Master-PUR hoses on spigots ...

Diameter: 3 mm - 54 mm

Polyamide fitting Colour -black, grey Material - Polyamide Protection class - IP 55 Temperature range - -30°C to +80°C Variant - PG, Metric Polyamide fitting clip Colour - black Material - Polyamide Temperature ...

Diameter: 6 mm - 62 mm

... Variant - PG, Metric Metal fitting clip Material - Metal Metal fitting pro Material - Nickel-plated brass Protection class - IP 67 Temperature range - -20°C to +80°C Variant - NPT, PG, Metric Metal ...

Diameter: 18.7 mm - 39.5 mm

Polyamide fitting 90 Colour: grey, black Material: Polyamide Protection class: IP 55 Temperature range: -30°C to +70°C Variant: PG, Metric

Cap nut - : - Brass with nickel plated Ring - : - PA6 Ferrule - : - Aluminium / brass Gland body - : - Brass with nickel plated O-ring - : - NBR Connection thread - : - Metric (EN60423) / PG (DIN 40430) Properties - : - Easy to ...

Cap nut - : - Brass with nickel plated Ring - : - PA6 Ferrule - : - Aluminium / brass Gland body - : - Brass with nickel plated O-ring - : - NBR Connection thread - : - NPT ANSI B1.20.1 Properties - : - Easy to assemble : - Fixed ...

Flexible Spiral Conduit Fittings Liquid Tight Female Type Fixed & Swivel Cap nut: - Brass with nickel plated Ring: - PA6 Ferrule: - Aluminium / brass Gland body: - Brass with nickel plated O-ring: - NBR Connection ...

Diameter: 13.25, 16.75 mm
Operating pressure: 250, 400 bar

... 1 thread seal Connection 1 BSPT conical external threads Construction T shaped Design Screw-in fitting Construction type French series Note Hinweise zur Montage, Einbau, Druckbelastung ...

Diameter: 12 mm
Operating pressure: 250 bar

Application area Meiler automotive engineering Connection 1 metric cylindrical inner thread Sealing form 1 for screw-in pins with shapes A, B and if necessary E Material Steel Surface electro galvanised ...

Diameter: 6 mm - 31 mm
Operating pressure: 160, 420, 400, 315, 300 bar

Application area Automotive engineering Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Residual pressure Coupling under residual pressure is possible Material ...

These tools manufactured by Omega Air, are pneumatic quick couplings that features a scratch resistant material composition. Their flow capacity guarantees users a high compressed air supply for its pneumatic components. Moreover, these ...

Diameter: 12 mm - 500 mm
Operating pressure: 16 bar

Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - ...

Diameter: 16 mm - 125 mm
Operating pressure: 16 bar

PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...

Diameter: 0.38 in - 4 in
Operating pressure: 16 bar

Series of fittings for pipes conveying fluids under pressure with threaded joints. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with ...

Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar

... 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L Stainless steel SZR crimp fittings Molded clamps Features Outer Layer VMQ Silicone, smooth and translucent. Reinforcement Polyester ...

Diameter: 1.6 mm - 28 mm
Operating pressure: 250 bar

Characteristics, specialities • easy and fast to install • resistant to corrosion • compact size • extensive range • many combination possibilities Material Stainless steel 1.4571 (≈ 316 Ti), alloy X6CrNiMoTi17-12-2, DIN EN 10088-3 Leak ...

Diameter: 4 mm - 16 mm
Operating pressure: 10 bar

for aggressive air, gases and liquids in an aggressive environment, e.g. in laboratories, process engineering, biotechnology, medical and laboratory technology Characteristics, speciality • easy and fast to install • extensive product ...

Diameter: 2 mm - 35 mm
Operating pressure: 250 bar

- easy and fast to install - compact size - extensive range - many combination possibilities M = connection nut with metric thread (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2), surface ist pickled Nominal pressure ...

Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar

... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...

Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar

Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds ...

Diameter: 4 mm - 15 mm
Operating pressure: 1 bar - 20 bar

Touch fittings are mainly used during “plastic” tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The fitting ...

Diameter: 0.13 in - 4 in
Operating pressure: 10 bar

GF-140C Conical seal with parallel BSP thread to DIN EN 10226

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Operating pressure: 25 bar

ELAFLEX delivers for hoses suitable connection fittings. The ferrule hose couplings with union nut (female thread) and male thread, suitable for self-assembly. Working pressure up to 25 bar. Meets EN 14424. Female ...

Diameter: 25 mm - 100 mm
Operating pressure: 25 bar

ELAFLEX delivers for hoses suitable connection fittings. Hose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of hot stamped aluminium. Pins stainless steel. Working pressure up ...

Diameter: 13 mm - 100 mm
Operating pressure: 25 bar

ELAFLEX delivers for hoses suitable connection fittings. Hose couplings with male thread to EN 14420-5 with re-usable SPANNLOC bolted clamps of hot stamped aluminium. Bolts and nuts steel, zinc plated and chromated. ...