- Production Machines >
- Forming Machine >
- Industrial press >
- EMG - LONG
EMG - LONG industrial presses
60 kN Cordless Electro-hydraulic Compression Tool to Crimp Tubular and Al/Cu Lugs and Butt Connectors ESDC60 electro-hydraulic compression tool ✔ Output force: 60 kN ✔ Stroke: 17 mm ✔ Autonomy: 180 to 450 crimping operations with ...
MECATRACTION
Pneumatic compression tool for crimping ✔ Crimping of loose connections (insulated, end sleeves, disconnects with closed or open barrel, etc.). ✔ Other crimping or applications: cutting of materials, punching… consult us. ✔ Stroke: ...
MECATRACTION
ESC120 electro-hydraulic compression tool ✔ Output force: 120 kN ✔ Stroke: 25 mm ✔ Autonomy: 110 to 220 crimping operations with battery 4.0 Ah ✔ Cycle time: 5 to 8 s depending on the section ✔ Dimensions: 385 x 315 x 72 mm ✔ ...
MECATRACTION
Opening: 0 mm - 35 mm
... Tn pneumatic press for Aluminum profiles Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile for the hardware to assemble ...
Force: 32.4 kN
Opening: 20 mm - 80 mm
... pneumatic punching machine for aluminum profiles Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile for the hardware ...
Force: 78.5 kN
P-8000 G 8 Tn pneumatic press for aluminum profiles punching works Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile ...
Force: 50 tf
Stroke: 500 mm
Table width: 800 mm
Press technologies: electrical axis with high efficiency, speed, accuracy and dynamic movement Compact and easy integration into automatic cell Multilingual dialog and programming interface on a 12’’ touch screen ...
NUMALLIANCE
... insertion and circlip fitting press. – A loader for supplying bearings. – A bearing positioning device above the hub. Lowering of the press – Position check by digital rule. – Pressure check by sensor. – ...
NUMALLIANCE
STRAIGHTENING AND FORMING PRESS C-FRAME OR ARCH PRESSES Are adapted for custom work or mass production to use in aircraft, energy, agribusiness, automotive, heavy industry … Designed for a large ...
NUMALLIANCE
Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm
... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...
SOMAUT S.r.l.
Force: 1,470.9 N
Opening: 450 mm
Stroke: 63, 100, 160 mm
... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...
SOMAUT S.r.l.
Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm
... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...
SOMAUT S.r.l.
Force: 320, 600, 800, 1,000 kN
Opening: 450, 500, 550 mm
Reducton of Mold Wear All movements can be controlled. In this way, the stroke is completed as soon as possible and without permitting the deformaton of the mold. Integrated software that combines hydraulic and mechanical servopress ...
Force: 200, 100, 150 kN
... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...
Force: 100, 30, 60 kN
... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...
... height control measuring the height of every part run in the system. A typical system consists of a Flex tool, Floating Anvil Press, Centering Station and Loader with vacuum. Below are descriptions of the three main types of systems:
Fancort Industries, inc.
Overall width: 890, 1,070 mm
Overall height: 1,600, 1,670 mm
This energy and space saving utility machine makes layout changes in the sewing process simple.Individual functions of pressing time,pre-steam,steam and vacuum result in high quality and consistent finishing. Revolutionary ...
NAOMOTO
Force: 1 kN - 20 kN
Safety, silentness, accuracy, stiffness, oxidation protection, easy use: these are the most important features of the PRNA series of pneumatic presses, characterized by cylinders in extruded anodized aluminium with hidden tie rods. G.P.A. ...
G.P.A. ITALIANA
Force: 98.1 kN - 2,451.7 kN
Opening: 95 mm - 300 mm
Extremely sturdy frames, made from welded steel profiles, available as bench mount (EC series) and floor mounted H-Frame models. Models are available powered by hand pump, air/hydraulic pump or electric/hydraulic pump. CE versions ...
Manual Hollow die punch AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies made of steel as prescribed by international ...
AMSE
Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 150 mm
... with spring recoil and approximation spindle screw. Solid structure in a monoblock format to ensure greater rigidity of the machine as a whole. Movable bedplate adjustable to different heights by means of an anti-fall ...
MECAMAQ, SL
Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 250 mm
Pressure regulator - • Two-speed hydraulic unit - - Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...
MECAMAQ, SL
Force: 80 tf
Opening: 860, 1,000, 260, 220 mm
Stroke: 250 mm
Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...
MECAMAQ, SL
Force: 3,150 kN
... multi-purpose press for drawing, punching and embossing. The frame is made of steel and is welded into one piece (WP = Welded Plate). This model offers many options such as cushion, third cylinder, light curtain and/or ...
AP&T
Force: 10,000 kN
ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in many different configurations. This ...
AP&T
Force: 50,000 kN
The ODEN-FT hydraulic press is for press operations with higher tonnage and larger press beds. It is excellently suited to press hardening, drawing, embossing, punching, ...
AP&T
Used to extract water by equalising moisture over the entire width of the fabric / . Used to impregnate fabrics with chemicals and achieve optimum squeezing Speed Compensator Dancing roller group at the outlet, made up of two rollers ...
... homogeneous squeezing/impregnation over the entire width of the fabric by means of the floating roller. Electrical panel on the machine Possibility of installing the flexo roller in all Bianco padder at two-rollers. Control ...
Compact system for high squeezing and impregnation. Central Roller Driven by gearmotor. 3 Rollers Diameter 290 mm, lined with synthetic rubber with flat and parallel grinding, 85-95 shore hardness, pressure 67 Kg/cml. Special ...
Lapel edge combination pressing machine with facing extension for 1-4-button jackets Advantages: Special shaping User-friendly 5.7“ colour touch display Separate program selection switch: Allows quick change of programs Facing ...
VEIT
Force: 4,000, 7,000, 8,800, 11,000 kN
Opening: 100, 130 mm
Rate (strokes/min): 60, 70, 85, 100 p/min
... production. Its modular design makes it easier to integrate into existing plant systems and digital production controls. Machine highlights. 50% less energy consumption. The innovative drive concept consumes less ...
Force: 1,500, 2,500 kN
Rate (strokes/min): 200, 140 p/min
Stroke: 50, 70 mm
The XFT speed press series boasts both short changeover times and high cycle rates. State-of-the-art servo-drive technology achieves cycle rates that were previously considered impossible. Machine highlights. The ...
Force: 16 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar
Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...
NICEM
Force: 25 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar
Press for the vulcanization of silicone rubber moulds with maximum diameter of 400 mm, automatic hydraulic pump and pressure stabilizer. This machine is equipped with a timer for the programming of ...
NICEM
Force: 50 tf
Opening: 240 mm
Max. pressure: 0 bar - 250 bar
Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...
NICEM
Force: 10 tf - 200 tf
Stroke: 150 mm - 500 mm
... High pressure-hydraulic hoses. • Glycerine-damped pressure gauges. • Fixing holes in base profiles, adjusting device for press table and head, swivelling pump console, conversion chart: Pressure-force etc. Description ...
Force: 150, 200 tf
Opening: 13, 10 in
Stroke: 13 in
... jobs. Other features of the 150-200T H-Frame Press include: • May be used horizontally for special pressing applications with user-supplied supports. • Work head has wide horizontal travel; rugged press ...
SPX Hydraulic Technologies
Force: 80, 100, 150, 200 tf
Stroke: 13 in
The original, patented Roll-Bed® design where the bed rolls out for easy loading and unloading with a crane or other lifting device, supporting loads up to 3,000 lbs (1361 kg). The Roll-Bed Presses are available in 4 different capacities. ...
SPX Hydraulic Technologies
Force: 25 tf
Stroke: 6 in
Weight: 240 lb
The Power Team C-Frame Press is available with a 25T capacity. The Open throat design makes loading and unloading work easy. Other features of the C-Frame Press include: • Can be bench mounted or on ...
SPX Hydraulic Technologies
Five-mug digital heat press This iKonix digital mug heat press prints on up to five items at a time. Suitable on a wide range of items, this heat press transfers on promotional products ...
... tackle stubborn wrinkles while reducing ironing time by up to 50 percent. With its advanced design and build, a PSP steam press will leave a professional dry-clean finish on all types of garments.
Hydraulic press used to reduce the mattress thickness. reduce the mattress thickness according to the resistance of the material being pressed. Perfect polyethylene adherence over the entire mattress can be obtained with ...
In a single solution the SM215H-3B is the ideal machine to eliminate the mattress bag, packing only or for those who want to press it. The packaging is made using a roll of upper and lower polyethylene ...
Pillow and quilt press. Versatile press used to pack pillows, quilts, eiderdowns by pressing and sealing the nylon bag.
Force: 100 kN
Rate (strokes/min): 190 p/min
Stroke: 8 mm - 52 mm
... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...
MIOS PRESSE SRL
Force: 200 kN
Rate (strokes/min): 155 p/min
Stroke: 8 mm - 60 mm
... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...
MIOS PRESSE SRL
Force: 400 kN
Rate (strokes/min): 140 p/min
Stroke: 5 mm - 76 mm
... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...
MIOS PRESSE SRL
Force: 100 tf - 3,500 tf
... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...
... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...
... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...
Max. pressure: 6 bar
Weight: 80 kg
Overall width: 350 mm
The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic cylinder ...
joke mechanix GmbH
Force: 4,200 N
Stroke: 100 mm
Max. pressure: 6 bar
The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic cylinder ...
joke mechanix GmbH
Opening: 95 mm
Max. pressure: 6 bar
Sealing seam length:2,500 mm Sealing seam width: 6 mm, heated on both sides Bar aperture 100 mm Film aperture: 2,500 mm Sealing output max. 2 x 0.4 mm PE film Pulse time: continuously digitally adjustable Cooling time: continuously digitally ...
joke mechanix GmbH
Force: 250 kN - 4,000 kN
Stroke: 3 mm - 270 mm
JH21 Series High performance open back stationary pneumatic press Main Features: 1, This series of press frame is welded by steel plates, small deformation, good rigidity. 2, This series of machines ...
Force: 3 kgf
... suitable for the transmission of multiple sets of single-process molds in the step-by-step molding process under the same press. Hydraulic streching + single-arm multi-station robot production line The UL 2-in-1 ...
Dongguan Henli Machinery Equipment Co., Ltd.
Force: 4 kgf
Hydraulic pump power: 2.7 kW
... flexible layout and space saving 4、Fast movements, up to 12 to 15 times per minute (depending on the range of motion, mold and press overall performance). 5、Can teach programming, programming time is short, the ...
Dongguan Henli Machinery Equipment Co., Ltd.
Force: 4 kgf
Hydraulic pump power: 2.7 kW
... flexible layout and space saving 4,Fast movements, up to 12 to 15 times per minute (depending on the range of motion, mold and press overall performance). 5,Can teach programming, programming time is short, the ...
Dongguan Henli Machinery Equipment Co., Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining