- Power Transmission - Mechanical components >
- Mechanical Transmission >
- Coupling >
- Voith Turbo
Voith Turbo couplings
Torque: 0.3 Nm - 40 Nm
Rotational speed: 7,500 rpm - 25,000 rpm
... element - a flat parallel link system with flexure joints - combined with this technical plastic material gives the encoder coupling special properties. It enables displacement compensation on one level with the resulting ...
SCHMIDT-KUPPLUNG
Torque: 12.5, 17, 60, 160 Nm
... flexible claw couplings are suitable for compensating axial, radial and angular misalignments and for damping vibrations and torque shocks. The shock-absorbing properties are due to the elastic elements (elastomer) ...
Max
Torque: 3 Nm
Rotational speed: 6,000 rpm
... consequence, they are ideal for extreme operating conditions. Single joint couplings are available with different hub lengths and bore diameters in addition to insulated coupling versions for attachments ...
Johannes Hübner Giessen
Torque: 0 Nm - 5 Nm
Rotational speed: 0 rpm - 8,000 rpm
... proof HKD metal multiple disc couplings compensate a parallel misalignment up to ±0.5 mm and an axial misalignment up to ±1.5 mm as well as extending the service life of encoders in the process. The double joint couplings ...
Johannes Hübner Giessen
Torque: 3 Nm
Rotational speed: 6,000 rpm
... consequence, they are ideal for extreme operating conditions. The double joint couplings are available with different hub lengths and bore diameters in addition to insulated coupling versions for attachments, ...
Johannes Hübner Giessen
Torque: 5.6 Nm - 271 Nm
The taper bushes allows to align or to lock pulleys, sprockets or toothed couplings to a transmission shaft, quickly and without the use of equipment. The taper bushes is equipped of bore and keyway. The taper bushes ...
BEA Ingranaggi
Applications composed by flanges and fittings necessary to couple pumps and PTO’s with different standards, such as ISO, SAE, DIN, etc.
For transmission of drive torques of power or manual drives with oblique angled shaft and length adjustment, for VariVent ventilation systems. Rectangular aluminium tube, 40 x 40 / GKT 06: 60 x 60 mm, with two steel joints, with spacer ...
Torque: 0 Nm - 130,000 Nm
Rotational speed: 0 rpm - 14,500 rpm
Torsionally rigid coupling ``GTR`` Made in steel fully turned with standard treatment of phosphating. Disc pack in stainless steel. High torsional rigidity. Maintenance and wear free. Version ...
ComInTec
Torque: 10 Nm - 56,000 Nm
Rotational speed: 1,400 rpm - 19,000 rpm
Metal hubs (cast iron, steel, aluminium alloy) Polyurethane spider In “flexible couplings” range it has got best "transmissible power/dimension" ratio Couplings can be supplied according to ATEX DIRECTIVE ...
SIT S.p.A.
Serie AG Attack Fork Manufacturer - Chiavette Unificate S.p.A. Part Number - AG4
Chiavette Unificate S.p.A.
Torque: 112,984 Nm
the first, the finest... flexible coupling with Fully-Crowned Gear Teeth. In contrast with ordinary gear tooth forms, the Amerigear Fully-Crowned Tooth represents the ultimate achievement in the art of gear tooth design, ...
Ameridrives Couplings
BRAKE DRUM COUPLING TYPE RKK-WBT About the product Elastic shaft coupling, Claw coupling with brake drum for drum brakes according to DIN 15435 Coupling is positively ...
BRAKE DISC COUPLING TYPE RKK-WBS About the product Elastic shaft coupling, Claw coupling with brake disc for disc brakes Coupling is positively and breakdown-resistant Made ...
ELASTIC SHAFT-, CLAW COUPLING TYPE RKK-W About the product Elastic shaft coupling, Claw coupling with brake drum for drum brakes according to DIN 15435 Coupling ...
Torque: 15 Nm - 37,500 Nm
Rotational speed: 2,500 rpm - 9,900 rpm
Fail-safe plug-in/jaw coupling with flexible element (spider) Standard applications with normal requirements regarding torque and damping capabilities. Product features Plug-in coupling, easy assembly Fail-safe Reduces ...
Optibelt
The R/GS is a type of clutch that is specifically being utilized for the connection between the gearbox and the motor.
... slipping coupling: Serve as overload protection when connecting two shafts. They consist of an RT slip hub and a chain coupling; Advantages of RK slip coupling: Low maintenance Easy ...
RKK slip claw coupling: Serve as overload protection when connecting two shafts. They consist of an RT slip hub and a claw coupling. Advantages of RKK slip claw couplings: Axially ...
A quality line of standard duty couplings that are assembled in Mexico using USA steel and gaskets. Manufactured with the same high quality as our other couplings, but at a lower price point. In full ...
Tridon Clamp Products
The original no hub coupling that is made in USA. A high quality low cost alternative where structural reinforcement does not require the use of a heavy duty coupling. In full compliance with ASTM 564, ...
Tridon Clamp Products
... Torque: 80 in-lbs Ultimate Torque: 100 in-lbs Super Heavy Duty Green Shield® No-Hub Couplings Band Length (in): Ideal-Tridon Super Heavy Duty HD No Hub Couplings are listed or certified by all ...
Tridon Clamp Products
Rotational speed: 310 rad.min-1 - 14,500 rad.min-1
... gear couplings have been hardened by induction or nitration. Connection parts are used hammering in enclosed metrices and being tempered after the productions. Coupling Types: • Full-Flex Gear Couplings, • ...
depressurized coupling, max. operating pressure 200 bar radial misalignment of 2 mm is possible no coupling stroke required no protruding contours compact dimensions On machine centers with pallet ...
Torque: 0 Nm - 1,000,000 Nm
Gear Couplings Standard Range AGMA Type Axial Travel Type Continuous Sleeve Type Flanged Sleeve Type Stainless Steel Standard Range NDE Clarke Pitchline has manufactured it’s own standard series of Couplings ...
NDE Clarke Pitchline Ltd
Quick release couplings A special type of coupling that allows far quicker installation, movement and resetting of drive lines between motors or gearboxes and driven equipment. We offer a number of ...
NDE Clarke Pitchline Ltd
... Type Gear Coupling which can be custom designed to suit the customers application. The specially designed gear coupling enables our customers to quickly and easily disconnect the unit from their application ...
NDE Clarke Pitchline Ltd
Torque: 38 Nm - 23,000 Nm
Rotational speed: 800 rpm - 8,000 rpm
... separate by merely opening the coupling chain, and they offer an excellent cost / performance ratio for numerous applications in machine and plant construction. The wide application range is due to the numerous coupling ...
Torque: 30, 45, 80 Nm
Rotational speed: 12,000, 10,000, 8,000 rpm
Aluminum Oldham shaft coupling - GMT - bore diameter D1 = 14mm / D2 = 14mm Oldham coupling with black polyacetel(POM) Spacer - Set screw Operating temperature: -20°~80°. Offset of angular, parallel, ...
GMT Europe GmbH
Torque: 3 Nm - 50 Nm
Rotational speed: 8,000, 7,000, 6,000, 5,000, 4,000 rpm
Oldham coupling with aluminum bronze spacer - Set screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable ...
GMT Europe GmbH
Torque: 0.3, 2, 4, 1, 0.5 Nm
Rotational speed: 9,500, 7,600, 6,100, 4,800, 4,000 rpm
Rigidity coupling – Aluminum alloy – Clamping screw Light, very low inertial and high sensibility Maintenance free, super anti-oil and corrosion-resistance Beam type with no allowable offset almost, please show the axis ...
GMT Europe GmbH
Torque: 5.6 Nm - 90 Nm
Rotational speed: 0 rpm - 28,000 rpm
Suco VSE France
Torque: 0.1 Nm - 8,500 Nm
Your customized coupling completes the drive train: Flexible in design Fine-tuning your drive Maximum performance Metal bellows couplings, elastomer couplings and torque limiters Metal ...
WITTENSTEIN SE
Rotational speed: 500 rpm - 1,800 rpm
... as of the machine… etc. ELECON's scoop controlled - variable speed fluid coupling is an answer to fulfill this wish list CONSTRUCTION & FUNCTION Variable speed fluid coupling comprises of a stationary ...
BENZLERS
Torque: 15 Nm - 10,000 Nm
Rotational speed: 0 rpm - 10,000 rpm
Metal bellows coupling with simple flange mounting Features For simple flange mounting to special drive components Custom flange patterns available Temperature range -30 °C to +100 °C (-22 °F to +212 °F) Design Two ...
R + W Coupling Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining