|
|
Conax buffalo sealing gland
The MHM and MHC series of feedthroughs were designed to produce a leak free method of passing multiple probes or conductors (MHM and MHC) from ambient through to process conditions. Glands are available to carry upto 16 tubes or probes through a single fitting and elements in both metric and imperial sizes from 0.5mm (0.020") to 3.2mm (0.125")
The bodies of these feedthroughs are machined from 316L stainless steel and leak prevention is based upon soft sealant technology using Teflon®.Viton®, Neoprene, Lava & Grafoil®. All sealents are re-usable apart from Lava. Various thread forms and process connections are available including NPT, BSP, weld-neck and Tri-clover hygienic flanges.
|
|
This assembly consists of a stainless steel tubing swaged over bundled 24 AWG, solid, Teflon® coated thermocouple grade wires and/or copper wires. The feedthrough is furnished with 24 inches of leadwire on each end. Longer wire lengths can be furnished as required.
Features:
NO EPOXY - NO POTTING
HD18 - 0.187" Diameter 12 Conductor Wire Feedthrough Assembly
HD25 - 0.250" Diameter 24 Conductor Wire Feedthrough Assembly
HD31 - 0.312" Diameter 40 Conductor Wire Feedthrough Assembly
HD37 - 0.375 Diameter 60 Conductor Wire Feedthrough Assembly
Sheath Material: 300 Series SST, 4-1/2" nominal length
Temperature Range From -112°F to +250°F (-80°C to +120°C)
Vacuum Rating: 5 x 10-6mmHg @68°F (20°C)
Leak Rate: 1 x 10-9 scc/sec He @68°F (20°C),
1 atm supplied
Voltage Rating: 100 VDC
Amperage Ratings: 500mA
Feedthrough Pressure Rating @68°F (20°C):
5,000 psi (345 bar)
|
|
Cable glands System UNI Dicht
– boundlessly applicable
The PFLITSCH System UNI® Dicht - is the modern cable gland program for a widely varying range of applications in electrical technology and electronics, machine and plant engineering, installation, traffic and chemical technology.
Gland bodies of various metals and plastics can be combined with sealing inserts of various materials, and therefore adapted precisely to cable diameters and conditions of use.
With UNI Multi several cables can be guided through a perfectly sealed connection. In addition, with UNI Dicht hose cable glandsconnections, cables can also be protected externally in special hoses. e.g. for corrugated pipes or hoses.
Pflitsch contributed actively to drawing up the European standard EN 50262 and continues to set standards through innovations.
Certificates: UL/CSA, VDE, PTB etc.
|
|
|
Synthetic cable glands are made of either high-quality glass fibre reinforced polyamide, or polyamide PA 6. You can choose between our glass fibre reinforced Progress GFK series, or our Synthec® series with lamellar technology. Both product lines are available from stock with a wide selection of entry threads and a number of different RAL colours.
|
|
General description:
The Roxtec RS PPS back-to-back seal has been developed specifically to address the challenges of plastic pipes passing through pressurised and fire rated areas. The seal consists of two Roxtec seals that protect against water and gas leakage. An intumescent sealing strip in the middle expands when the plastic pipe burns through, and fills the empty space to stop any fire from passing through.
|
|
Metric cable glands, PG, with reducing insert, with cable guide...
Multigum,
Soft plugs,
Metric locknuts,
Metric hex washer faced locknuts,
Slotted plugs,
O-Rings...
|
|
|
|
|
|
Pressure and Vacuum Sealing Assemblies
Conax Technologies designs and manufactures a complete line of pressure/vacuum mechanical compression seal fittings and assemblies for wires and probes for virtually every industry. A wide range of catalog standard fittings are available from stock, while unlimited custom designs are also available for unique wire or probe sealing applications.
Exclusive "Soft Sealant" Technology
Conax Technologies' exclusive "soft sealant" technology enables easy assembly of the fitting by simply inserting the wire or probe and torquing the fitting cap. Replaceable sealants permit repeated use of the stainless steel fitting for easy installation and service in the field. Our standard sealant materials include Lava, Teflon®, Neoprene, Viton® and Grafoil® and are designed, depending on gland type, to seal pressures ranging from vacuum up to 10,000 psi/690 bar involving temperatures ranging from -400°F to 3000°F/
-240°C to +1650°C. Other sealant materials are available for custom applications.
Wire and Probe Sealing
In wire sealing, we routinely accommodate in one gland from 1 to 16 conductors ranging from 24 AWG to 3/4"/.03mm diameter to handle a voltage range from the millivolt level up to 8000 volts and currents up to 400 amps. In probe sealing, from 1 to 40 probes, ranging in size from 0.020"/0.5mm to 1.250"/32 mm diameter, are routinely pressure or vacuum sealed in a single unit. Beyond these, we offer custom or special assemblies.
|
|
Electrical Feedthroughs:
Nor-Cal's extensive line of electrical feedthroughs are manufactured from ultra-high vacuum grade materials such as high alumina ceramic insulators, OFHC® copper and nickel conductors, and 304 stainless steel flanges. These robust ceramic to metal feedthroughs have electrical ratings for operation with one side in dry atmosphere while the opposite end is in a stable vacuum. They are used in ultra high vacuum systems with CF flanges or high vacuum systems with NW flanges. CF feedthroughs can be baked to 450°C and NWs to 204°C with maximum system pressure of 1 x 10-4 Torr. Our product line consists of the most commonly required feedthroughs for general vacuum applications. Customs designs or modified standards can readily be supplied.
|
|
TRS - RUTASEAL LIGHT®
Rutaseal Light® is designed for strip lighting manufacturers and similar applications. Less material makes it lighter and easier to install, while providing IP67 protection.
Suitable for holes in materials of 1 - 4mm thickness.
• Quick and simple assembly without the use of tools
• Resistant to chemicals
• Weatherproof
RUTASEAL LIGHT® is very simple to use and demands no tools, which in turn means lower work cost. It requires no screwdriver or scissors to make the hole, which otherwise would endanger the IP Class seal.
RUTASEAL LIGHT® is SEMKO tested for IP67 internally and externally.
RUTASEAL LIGHT® is produced of EPDM in Metric sizes. The seals are produced in black, light grey and grey. RUTASEAL has a very high finish and the automatic method of production guarantees the same even and high quality on all products.
|
|
RUTASEAL is very simple to use and demands no tools, which in turn means lower work cost. It requires no screwdriver or scissors to make the hole, which otherwise would endanger the IP Class seal.
RUTASEAL is SEMKO tested for IP67 internally and externally. The chloroprene version is also DNV approved.
RUTASEAL is produced in EPDM and Chloroprene in both PG and Metric. The seals are produced in black, light grey and grey. RUTASEAL has a very high finish and the automatic method of production guarantees the same even and high quality on all products.
|
|
- Used to protect or cover through holes. Help eliminate sharp edges so your wires are protected and add aesthetic value to your application.
- 160 sizes available that will accommodate mounting holes ranging from .250%u02DD (6,4 mm) to holes as large as 2.50%u02DD (63,5 mm) diameter and panel thicknesses from .063%u02DD (1,6 mm) to .375%u02DD (9,5 mm).
- Rubber grommets are constructed of SBR with an operating temperature range of -40°F (-40°C) to 221°F (105°C).
- SBR grommets have good water resistant characteristics and are suitable for most moderate chemicals and wet or dry organic acids.
|
|
General description:
EMC installations are used for shielded transits against electromagnetic disturbances. When using Roxtec B, G, S and SF frames we recommend choosing galvanized versions. If mild steel versions are used, make sure to remove any priming on the inside surfaces of the frames to achieve good electrical conductivity. For casting with B and G frames make sure the frames are properly connected to earth. See casting instructions. Roxtec EMC installations are made together with Roxtec RM ES, PE, ES B or PE B modules.
|
|
|
|
|
|
For Video on this product use this link:
http://www.conaxbuffalo.com/videos/Sealing_Gland_Introduction/index.html
Conax Technologies Model PG Packing Glands provide pressure/vacuum sealing for tubes, proces, pipes, cable or any single element assembly (not eletrically isolating), including thermocouples, RTDs, thermometers, thermistor probes, capillary tubes, tubewells, multi-pair cables and analyzer sample tubes. PG glands seal against gases and liquids and resist element movement under pressure. Conax also manufactures sealed feedthroughs for multiple elements up to 240 wires or several elements with different diameters.
Features:
-Stainless Reusable Steel Fitting
-Seals 1 Element
-For Gas or Liquid
-Pressure*: Vacuum to 10,000 PSI (690 bar)
-Temperature Range From -400°F to +1600°F (-240°C to 870°C)
-Field Adjustable
-Simple Assembly - Insert Element, Torque Cap
-Replaceable Sealant Permits Repeated Use of Fitting
-Tube Stress Concentration Minimized
Application Ideas:
Pressure or vacuum sealing of thermocouples, RTDs, dial-type thermistor probes, glass thermometers, capillary tubes, ceramic tubewells, quartz tubewells, multi-pair cables, analyzer sample tubes, etc.
Replacement Sealant (RS) available consisting of sealant only.
Example: RS-PG2-125-T
Optional stocked body materials: Monel 405, Hastelloy C276 & 316SS.
|
|
|
|
|
|
The PG series of feedthroughs were designed to produce a leak free method of passing a single probe or conductor from ambient through to process conditions.
The bodies of these feedthroughs are machined from 316L stainless steel and leak prevention is based upon soft sealant technology using Teflon®. Various thread forms and process connections are available including NPT, BSP, weld-neck and Tri-clover hygienic flanges.
Applying the correct torque to the gland cap nut will ensure a permanent leak free seal without damage to the probe or conductor. Following the removal of a probe or probes for calibration the sealant can be re-used.
Where it is necessary to remove one or more probes (perhaps for operational reasons) when using multiple probes, normal sterilising procedures can still be maintained by fitting the vacant positions with an EGB. This is fabricated in 316L stainless steel to the same diameter of the absent probe. It is constructed with a larger diameter on the chamber side to prevent movement of the blank through the sealant when exposed to chamber pressure.
|
|
- Available in multiple sizes for cable diameters ranging from .065˝ (1,7 mm) to 1.560˝ (39,6 mm).
- We recommend using the fitting with the smallest maximum diameter that will fit your application.
- Smooth, rounded interior edges for ease of installation.
- Ratchet design of sealing nut assembly provides superior antivibration and ensures a firm grip on the cable.
- Easy to install–no tools required.
- Unique fingers securely lock into a range of panel sizes without use of locknut.
- Rotation prevented when used in “Double D” mounting holes.
- Limited intrusion into enclosure where access is tight.
- Consult Heyco for cordgrips molded in other colors
|
|
|
|
|
|
Conax Technologies offers three models of split glands designed to facilitate assembly and sealant replacement when the diameter of the probe tip is larger than the diameter of the element(s) at the location of the seal. Split glands provide split sealants, followers and seats to facilitate easy sealant change without removing the element(s) from the system.
Application Ideas:
-Sealing of analyzer sampling probes with blow-out collars; allows probe change out with removal of gland body.
-Gas filled capillary bulb temperatue sensors (PartLow style).
-Cable assemblies with factory installed connectors (vibration sensors).
-Sealing of a simple long length conductor, simplifying assembly, disassembly and change out of sealant.
The Conax Split Gland is currently the featured product on www.conaxtechnologies.com. Please visit the site for more information.
Features:
-Seals 1 Element
-For Gas or Liquid
-Stainless Steel Fitting
-Simple Assembly - Insert Element, Torque Cap
-Replaceable Sealant Permits Repeated Use Of Fitting
-Field Adjustable
-Tube Stress Concentration Minimized
-Temperature Range From -400°F to +1600°F (-185°C to 870°C)
-Pressure*: Vacuum to 10,000 PSI (690 bar)
|
|
|
|
|
|
Conax Design Solution: This product is a custom-designed hybrid of our Electrode Gland (EG) series and our Electrode Gland Teflon (EGT) series designs. We incorporated and combined positive features of each gland to benefit the customer in this application.
The EG offers high temperature resistance required closer to the heaters. The EGT offers more robust, less costly components for the balance of the assembly located where lower temperatures prevail.
The specially made solid nickel conductors are designed with staggered lengths to ease power cable attachment.
Benefits: Performance and longevity were improved with this design because the heating elements can function at peak performance at all times, reducing cycle times and down time. The few replacement parts required can be replaced on-site in the time it takes for the unit to cool down and be reloaded with new production material. The old design required a complete offsite rebuild over several months with a significant loss of productivity and a continuous performance degradation throughout its life cycle.
If you have a need to manage power or instrument leads into any type of an autoclave look to Conax Technologies for your solution.
|
|
|
|
|
|
Conventional methods of chamber entry for validation thermocouples allow only limited numbers of thermocouples to be used. They are relatively time consuming in their application and frequently prone to unacceptable leakage.
The TCEG/1 addresses both these problem areas by providing individual slots for 18 separate thermocouples and a rapid action, locking and securing mechanism.
By utilising a three part sealant arrangement the gland becomes a TCEG/2 with the opportunity of increasing the capacity to 36 individual thermocouples. Should even more thermocouples need to be accommodated, then a ‘Y’ adapter connected to the chamber entry port can double both these quantities.
For mounting onto the autoclave chamber the TCEG is supplied with a Tri-clamp flange with the option of having a 1½” or up to 2½” flange.
The gland body is machined from 316L stainless steel with the cap in CZ121 brass. Sealants are in medical grade silicone to Shore 40 hardness and in accordance with FDA USP Class VI.
|
|
WISKA SPRINT SYSTEM Flexible, safe, economical
WISKA SPRINT is a high-quality, innovative range of metric cable glands, capable of covering all the safety requirements imposed on cable entry.
|
|
Cable glands System UNI Dicht
– boundlessly applicable
The PFLITSCH System UNI® Dicht - is the modern cable gland program for a widely varying range of applications in electrical technology and electronics, machine and plant engineering, installation, traffic and chemical technology.
Gland bodies of various metals and plastics can be combined with sealing inserts of various materials, and therefore adapted precisely to cable diameters and conditions of use.
With UNI Multi several cables can be guided through a perfectly sealed connection. In addition, with UNI Dicht hose cable glandsconnections, cables can also be protected externally in special hoses. e.g. for corrugated pipes or hoses.
Pflitsch contributed actively to drawing up the European standard EN 50262 and continues to set standards through innovations.
Certificates: UL/CSA, VDE, PTB etc.
|
|
PFLITSCH blueglobe® - 30% higher sealing range - 40% fewer order expenditure - 100% higher tightness - 200% more protection rate - more use in per cent!
Clearly better than the market standards
The PFLITSCH cable gland blueglobe® made of brass, stainless steel and plastic sets new standards regarding safety, reliability, functionality and costs.
ATEX
Available now in nickel plated brass and stainless steel certified as per European standard ATEX.
|
|
Heyco® Liquid Tight Cordgrips
Multi-Hole, PG Hubs
Features
All accompanying Cordgrips are made of nylon construction with TPE sealing glands that resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL.
Locknuts INCLUDED.
For body part dimensions.
Multi-hole glands are only to be used with Heyco Liquid Tight Cordgrips and are not sold separately.
Consult Heyco for cordgrips molded in other colors.
|
|
. Reduced system
. IP 65 67
. Personalization with your needs
. Applications: boxes/cases, tables, cupboards, cabins/shelters
. Resistance to the vibrations, the shocks, the rodents, the cold heat/, fire, the products
|
|
Conax Technologies designs and manufactures a complete line of Transformer and motor power, conduit box feedthroughs, pressure and vacuum chamber power and instrument feedthroughs, etc.
*Stainless Steel Fitting
*For Gas or Liquid
*Easy Installation -No "Potting"
*Seals 1 to 240 Wires
*Pressure: Vacuum to 10,000 PSI (690 bar)
*Rated: 600 Volts to 55 Amps
*Field Adjustable
*Reusable Fitting
*Wire Identification Markers Applied
*Wires Readily Assembled or Replaced in Field
*Available With or Without Conductors
*Available With Thermocouple Material Conductors - Selected Sizes
|
|
| ... products without technical information |
| |
|
|
Cable glands, Sealed cable passages
