|
|
Venting connection nickel-plated brass
Steel lock nuts
Adjustable fixing device nickel-plated brass
Steel locking plugs
Lock nuts nickel-plated brass
Synthetic lock nuts
Lock nuts nickel-plated brass thick-walled version
Synthetic lock nut with flange
Fixing lock nut nickel-plated brass with recess for o-ring
Synthetic enlarging fittings
EMC lock nut nickel-plated brass with cutting teeth for optimised shield contact
Synthetic reduction fittings
Reduction fittings nickel-plated brass
Synthetic locking plug
Reduction fittings nickel-plated brass
Solig rubber sealing inserts
Enlarging fittings nickel-plated brass
O-rings NBR, FPM, sealing washers
Locking plug nickel-plated brass
Blind discs, locking pins, sealing rings
Grounding strap suitable for cable glands
Special tool
|
|
|
Our products carry global certification and many feature our unique single orientation clamping system CROCLOCK. No reversible components no mistakes. The recently released barrier glands have won awards for technical and feature many user benefits.
|
|
This cable safety system is for the safe grounding of cable armouring.
The system has the following features:
* Anti loosening system (important for plastic surfaces)
* Will take high fault currents
* Will take 2 earth cables 6mm2 or 10mm2
* Comes complete (requires no other parts)
* Quick/easy to install
* Available for 20mm and 25mm cable glands (larger sizes will be available)
|
|
a whole of frameworks - to weld, seal or screw - make it possible to equip the crossing with the wall;
these frameworks receive modules adapted to the diameter of the conduits and drains;
accessories make it possible to ensure the cohesion and the sealing of the modules installed inside the framework.
|
|
|
Croclock CR C type glands provide a Flameproof EExd compound filled barrier, a seal on the outer sheath, a universal armour clamp for armoured, screened or braided cable any an entry thread seal.
|
|
|
|
|
|
Pressure and Vacuum Sealing Assemblies
Conax Technologies designs and manufactures a complete line of pressure/vacuum mechanical sealing glands and assemblies for wires and probes for virtually every industry. A wide range of catalog standard sealing glands are available from stock, while unlimited custom designs are also available for unique wire or probe sealing applications.
Exclusive "Soft Sealant" Technology
Conax Technologies' exclusive "soft sealant" technology enables easy assembly of the sealing gland by simply inserting the wire or probe and torquing the gland cap. Replaceable sealants permit repeated use of the stainless steel fitting for easy installation and service in the field. Our standard sealant materials include Lava, Teflon®, Neoprene, Viton® and Grafoil® and are designed, depending on gland type, to seal pressures ranging from vacuum up to 10,000 psi/690 bar involving temperatures ranging from -400°F to 3000°F/
-240°C to +1650°C. Other sealant materials are available for custom applications.
Wire and Probe Sealing
In wire sealing, we routinely accommodate in one gland from 1 to 16 conductors ranging from 24 AWG to 3/4"/.03mm diameter to handle a voltage range from the millivolt level up to 8000 volts and currents up to 400 amps. In probe sealing, from 1 to 40 probes, ranging in size from 0.020"/0.5mm to 1.250"/32 mm diameter, are routinely pressure or vacuum sealed in a single unit. Beyond these, we offer custom or special assemblies.
|
|
Snaptec represents a new generation of strain relief fittings for
fast installation, featuring excellent pull-out resistance. Assembly
is possible from the outside of the enclosure, requiring no tools
or locknut. The unique concept saves time and money. Typical
applications:
- Machine, apparatus and plant equipment
- Measuring, control and feedback systems
- Control cabinets
- Railroad cars and vehicles
- Industrial applications´
|
|
CABLE GLANDS
SKINTOP® cable glands guarantee secure connections every time. Simply thread the cable and twist. That’s all! Your cables are perfectly centered, secured, hermetically sealed, and ready for action. Choose from ÖLFLEX® Power- and control cables a wide range of models in plastic or brass, for EX and EMC applications, halogen-free types or anti-kink protection, metric, PG or NPT.
|
|
Mencom cable glands, also known as cable grips or cord grips, are available in metal or plastic and with Metric, PG, or NPT threading. All Mencom cord grips have a wide clamping range. We carry a large selection of adapters that not only allow you to reduce or enlarge hole sizes, but will allow you to change thread types.
Mencom also has many specialty cable glands as well as o-rings, nuts, inserts and plugs.
|
|
sealing & insulation of the electrical cables by compression of a thermoplastic stuffing. Effective tightening, 2 plates of pressure.
Executions: nickelled brass or polyamide.
|
|
|
Peppers specialise in the manufacture of cable glands for use in hazardous locations found within Oil, Gas, Petrochimical and Marine installations.
|
|
|
|
|
|
These cable glands are particularly suited to armoured cables used mainly in areas where British Standards apply. The new cable gland Series 8163 are available for non-armoured and all for all types of armoured & braided cables. They fulfil all requirements of the European ATEX-directives and of the relevant IEC and British Standards. Their modular design allows exact adjustment to the respective cable constructions.
In addition on the normal sealing of the cable sheath, secure clamping of the armouring is essential since this armouring is used, not only for mechanical protection, but also contributes to te electrical protection. If the armouring becomes "live" it works as a protection or earthing conductor and must, therefore, be connected reliably to the protective conductor system via the cable gland. These cable glands are available "Ex" equipment in both "increased safety" and "flameproof" enclosures.
Explosion protection to CENELEC, IEC
For use in Zone 1 and Zone 2, Zone 21 and Zone 22
EEx d and EEx e versions
Versions for unarmourd, Single Wire Armour (SWA), Steel Tape Armour (STA), Wire Braid Armour
The cable glands Series 8161 are certified for use in "increased Safety" type enclosures. For entry intrinsically safe circuits a version with blue cap nut is available.
|
|
SCAME's range installation accessories for the installer includes:
* Cable glands, couplers, nuts and screw caps made of thermoplastic meterial which are particulary useful when installing switchboards (eg. cable glands for connecting cables of different cross-sections into switchboards while assuring a high degree of protection: IP 66 without seal and IP 68 with seal, couplers to join togheter adjacent boards to form ganged distribution units).
fam. 805: Cable glands, couplers, nuts and screw caps
|
|
TKS - KLIKSEAL®
Klikseal is a revolutionary two-component grommet with cable anchorage - something completely new to the market.
Through innovation and advanced production technology, we have designed a product that has many of the advantages found in a cable gland.
Apart from the cable anchorage, Klikseal is compact, self-adjusting to its surrounding wall thickness (patented), click-fixed in place (patented), has a membrane seal, is waterproof, requires very little effort to install with its collapsible outer membrane (patented), and saves up to 90% of your time.
The installation of a Klikseal requires no tools and has a
pop-out membrane that is a permanent seal until penetrated by a cable or pipe. Each size of Klikseal can be used with an exceptional range of cable and pipe diameters. An M25 can be used for cables and pipes ranging from 4 mm to 14 mm. Because of its compact design, the Klikseal only extends 5,7 mm outside the housing on which it is mounted.
|
|
THE ATMOSPHERE IS ALIVE. EXPERIENCE VentGLAND
Pressure, temperature and air humidity are in a constant state of change. This is no problem for nature - but a major one for technology. This is because no matter how well sealed the casing is, there are still pressure differences to the outside environment as a result of these effects. Consequently, condensation begins and where water is, there may also be corrosion, electrical short circuits or other damage. Frequently, this leads to breakdowns, emergencies, or supply bottlenecks.
In the field of cable glands, WISKA now has created a solution that is unrivalled - VentGLAND.
|
|
A new series of cable glands, fittings and flexible conduits will be offered to complete our offer of multipole connector enclosures.
The offered product series are:
- complete metallic or insulating cable glands, with longer thread, semi-cable glands, EMC execution, cable clamps, locking plugs, reducers and lock nuts
- straight fittings for flexible tubes, with 90°/45° angle, curved, metallic thread, "T" and "Y" junctions
- UL homologated, standard flexible tubes, heavy-duty and ultra flexible.
We draw your attention to the semi-cable gland version used together with the enclosures allows an effective reduction of overall dimensions.
|
|
Specifications:
Material: UL Approved Nylon 66, 94V-2
Color: Black
Features:
Easy to assemble
Wide clamping range
Provides strain relief & liquid tight cord grip
Protection rating IP68
Locknut & Washer supplied separately
|
|
Hawke International, a member of the Hubbell Inc group of Companies, has over the last 50 years, built a world-wide reputation in the hazardous area and hostile environment markets, with an innovative range of cable connection, termination and barrier products .
Our cable glands cover the whole spectrum of armoured and non-armoured cable and applications from general industrial through increased safety, deluge, flameproof and explosion proof. The cable glands are available in brass as standard with stainless steel, as an optional material on certain designs.
|
|
|
|
|
|
Straight-Thru NPT LTF's
For Flexible Cords. NPT HUBS - For use in clearance or threaded holes.
For a wider range of materials, cable sizes, & threads see Heyco- TITE Cordgrips
US Patent No. 5,405,172; Foreign Patents
Twelve sizes for cable, tubing, etc. with diameters ranging from .065'' (1,7mm) to 1.260" (32,0mm).
Acme threads on body prevent skipping and speed installation.
We recommend using the cordgrip with the smallest maximum diameter that will fit your application.
All nylon construction with TPE or Buna N Sealing Gland resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed for UL certification or testing.
All nylon construction with TPE or Buna N Sealing Gland resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed for UL certification or testing.
Working temperatures: -22°F (-30°C) to 212°F (100°C).
Protection class IP 68 per DIN 40050 up to 70 psi (5 bar) water pressure.
Suitable for NEMA type 4 and 6 enclosures.
ock nuts are NOT included.
|
|
PFLITSCH blueglobe® - 30% higher sealing range - 40% fewer order expenditure - 100% higher tightness - 200% more protection rate - more use in per cent!
Clearly better than the market standards
The PFLITSCH cable gland blueglobe® made of brass, stainless steel and plastic sets new standards regarding safety, reliability, functionality and costs.
ATEX
Available now in nickel plated brass and stainless steel certified as per European standard ATEX.
|
|
Rubber grommets symmetrical and Ws type with different misures and dimensions.
Grommets can be produced with different materials like SBR, NBR and EPDM.
|
|
TSS
The TSS is the latest addition to the TST product range.
What makes the TSS different from existing products on the market are the built-in features that you normally do not find in this otherwise relatively simple product.
TSS handles an exceptionelly large cable span.
With the ”pop-out-membrane” you always have a round opening and are guaranteed to have IP67.
The TSS is equipped with a sock that closes tight around the cable and allows for it to be moved around like a ”joy-stick” in the opening without endangering the IP-classification. So it works extremely well with cables passing through
at an angle.
These are some of the features that creates a lot of value added in the TSS, and makes it a unique product.
|
|
|
Alliance Plastics offers a wide variety of grommets to meet your individual application needs. Choose from rubber grommets, PVC grommets, diaphragm grommets, grommet sleeves, edging grommets, flexible wire management grommets and more.
|
|
Features and Benefits
- Provides slight strain relief
- Waterproof grommet
- Easy to install by pressing into the panel manually
- 10 times quicker than conventional cable glands!
- Gland is sealed until punctured by the cables passing through
- Accommodates panel thicknesses from 1.5 - 5mm (.059 to .197")
- Two sizes accept a wide range of cable bundle diameters
- Patented design
|
|
Grommets & Bushings
Richco has an extensive range of grommets, bushings and strain relief products. The wide range of grommets that Richco offers are designed to protect cabling against sharp edges, especially where vibration is an issue. The grommets can be used on straight edges, holes or irregular shapes.
Richco's grommet range is available in a variety of materials including plastic, rubber and metal. They can be easily installed without the need of adhesives, glue or installation tools. Richco has specific grommets to enable the user to install in irregular shapes or on straight edges.
Richco bushings are designed to easily snap into pre-drilled holes. They convert sharp-edged holes into smooth, insulated holes. Richco offers a split design which allows retrofitting on pre-assembled cable harnesses.
The elimination of cable strain and wear is solved via the use of Richco's strain relief bushings which are easily installed with an installation tool.
|
|
WISKA QUIXX. Push in, pierce through, ready.
There is no easier way to insert a cable with protection grade IP 66. For QUIXX we transferred the soft membrane technique from junction boxes to cable inserts.
|
|
|
A Transit System is a means to maintain the integrity of a firewall,bulkhead or deck through which cables pipes and other services pass.The transit system will seal against and exhibit resisitance to fire,EMC,water,radiation,gas,chemicals,explosion,ultra violet light,smoke,vermin.Wherever a wall or bulkhead is penetrated by a cable or pipe the occupants and integrity of the structure are exposed to risk from hazards such as fire and smoke, water ingress, toxic gases and attack by vermin.
|
|
|
Pfeiffer Vacuum's product portfolio is rounded out by a broad selection of components, feedthroughs and lubricants. Standard valves in numerous designs, e. g. manually, electropneumatically, or electromagnetically operated.
|
|
General description:
Roxtec Compact Seals provide protection against water, dust, insects and rodents for equipment in cabinets and enclosures. All frames, except for the C KFO frame, have integrated compression units. C frames are used together with standard Roxtec CM modules, 30 millimetre (1.181") deep, except EMC versions which use 40 mm (1.575") deep CM ES or PE modules. In some cases EEx versions are also available.
|
|
General description:
Roxtec regular frames are available in different designs and materials. The depth of the frames and modules is 60 millimetres (2.362").
The choice of frame depends primarily on the material used in the construction and the method of attachment. The frames can either be cast, bolted, welded or fitted into sleeves. Frames are also available for use in EMC and EEx applications.
|
|
|
|
Cable glands, Sealed cable passages
