punch press / hydraulic / with automatic feeder / CNC
punch press
150 kN, ø 80 mm | SA2

An electromechanical punching machine INTESO SA2 with fully automatic feed by electric servo motor and CNC control is designed for deformation-free punching of tubes and profiles of various cross section up to 4 000 mm in length. This ...

punch press / hydraulic / with automatic feeder / CNC
punch press
150 kN, ø 80 mm | S2

Hydraulic punching machine INTESO S2 with fully automatic feed by electric servo motor and CNC control is designed for deformation-free punching of tubes and profiles of various cross section up to 4 000 mm in length. This equipment ...

discharge press / hydraulic
discharge press
PH

PH, hydraulic presses, equipped with lifting and lowering platform located at ground level, to raise the container to the filling or discharging level. Discharge plate that travels the full internal height of the vessel, resulting in ...

cold press / hydraulic / with heating plates / for the wood industry
cold press
BEU Series

Pressing force: 650 kN - 900 kN
Opening: 400 mm

JOOS-QUALITY-PRESS BEU The Joos-Quality-Press BEU is the entry level machine in the category of the hydraulic presses. Despite its simplicity the principle to develop and manufacture only high quality machines, that come up with the ...

veneer press / hydraulic / with heating plates / for the wood industry
veneer press
HP Series

Pressing force: 450 kN - 1500 kN
Opening: 400 mm

JOOS-QUALITY-PRESS HP The Joos-Quality-Press HP is the “classic” of company Joos. This is classified as the first hydraulic press that is especially developed and manufactured for the craft. It has been continuously enhanced and is ...

briquetting press / hydraulic
briquetting press

Briquetting Press Heavy duty briquetting press processes pre-compacted fiber and dust waste into solid briquettes. Consistent briquettes Automatic operation Extremely robust construction

hydraulic press
hydraulic press

Built with quality materials and accurately finished, this are a valid instruments for producing laboratory samples, especially for the ceramics industry, but also for various other industrial sectors. The mould is interchangeable (the ...

hydraulic press / automatic / for profiles
hydraulic press
max. 1250 x 800 x 1000 mm | 2 AP

The machine is designed according to directives. The height of the pressing blade, hydraulic pistons can be adjusted. Clamp squeezing and knife movement is hydraulic. Hyraulic movement, automatic operation system. Height of pressing ...

mounting press / hydraulic / hot
mounting press
EP50T

EP50T is the Hitech Europe’s hydraulic mounting press offered by tecmet2000. It is an automatic machine, whose operating system has high execution speed and results. The touch screen and the microprocessor allow to create complex cycles ...

hydraulic press
hydraulic press
50 - 1 000 kN

Pressing force: 50000 N - 1000000 N

See the other products
SOCOPRESSES
hydraulic press / straight-side
hydraulic press
100 - 1 000 kN

Pressing force: 100000 N - 1000000 N

See the other products
SOCOPRESSES
forming press / hydraulic / column type
forming press
65-01

Hydraulic Lab Presses are available in two or four columns with standard or heated platens. The standard models are recommended for pelletizing, destructive testing, fluid extraction and pressure forming. Presses with heated platens ...

hydraulic press / straight-side
hydraulic press
A series

A Series: Small-medium size presses, with 2 columns (ANG T.15 2C and ANG T.35 2C), 4 columns (ANG T.35 4C and ANG T.75 4C) and welded iron structure (NKT. 150), where the number means the power of the machine. These presses are very ...

hydraulic press / column type
hydraulic press
150 - 2 500 t | PH, PDH series

The strength and rigidity of press preserves high accuracy CROWN, UP-RIGHT and BED are strongly constructed with TIE-ROD(Hydraulic TIE ROD NUT ) Specially designed hydraulic system get rid of transmitting shocks. Using high reliability ...

See the other products
SIMPAC
tryout press / hydraulic / column type
tryout press
max. 2 000 t | PTS2 series

Designed and produced for die-mold and parts try-out Special device for checking deformation data. when die-mold is tried out High accuracy of slide position controlling with Rotas pump Adopting mode select S/W for Try-out, Die spotting ...

See the other products
SIMPAC
hydraulic press / workshop
hydraulic press
15 - 30 t

Extremely sturdy frames, made from welded steel profiles, available as bench mount (EC series) and floor mounted H-Frame models. Models are available powered by hand pump, air/hydraulic pump or electric/hydraulic pump. CE versions ...

hydraulic press
hydraulic press
max. 150 t

Specifically designed for removal and installation of track pins. Capacity : 150T Stroke : 380mm. Can be delivered with specific accessories for your model of track pins. To be combine with a QUIRI hydraulic power unit (gasoline or electric motor).

forging press / hydraulic
forging press
3 200 t

Application: Open die forging hydraulic press is mainly used for the open die forging process, include: blanking, upsetting, swaging, punching, expending, bending, cutting, offset, etc. The press is equipped with die magazine, include: ...

See the other products
Tianjin Tianduan Press Co.,Ltd.
forging press / hydraulic
forging press
500 - 12 000 t

Application: Isothermal close die forging hydraulic press is mainly used for the isothermal close die forging process at narrow temperature range of alloy steel materials which Is difficult to deform. Main Parameters: Capacity 500T-12000T Stroke ...

See the other products
Tianjin Tianduan Press Co.,Ltd.
drawing press / hydraulic / straight-side
drawing press
G2-700

Gigant Itaia S.r.L. is one of the leaders when it comes to the design and manufacturing of 2 to 4 uprights type hydraulic drawing presses, with a force ranging from 600 to 30,000 kN, for applications such as embossing, reverse drawing, ...

See the other products
Gigant Italia
drawing press / hydraulic / C-frame
drawing press
GTP - 120

Gigant Italia S.r.L. presents high-paced C-Frames Hydraulic Presses that range from 400 to 2500 kN for in-depth drawing treatments in various commercial markets for aluminum steel pieces. The presses are produced taking the technical ...

See the other products
Gigant Italia
cold press / hydraulic / for the food industry
cold press
max. 80 kg/h | Pilot

In the course of time the chocolate imaginary deeply transformed. From a sin of gluttony to a gourmet’s snobbery, from caloric and cariogenic “bomb” to health and nourishing food. Like for other foodstuff such as wine, vinegar, oil and ...

briquetting press / hydraulic
briquetting press
max. 90 kg/h | Genius series

The GP Genius series was developed for briquetting chips and dusts especially. These high-performance, robust and high-quality machines compress homogenous material to form com-pact briquettes. Due to its highly effective hydraulic system, ...

briquetting press / hydraulic
briquetting press
max. 160 kg/h | GP series

GP series briquetting presses are especially robust and handle all briquetting materials such as wood shavings, wood chips, paper, different types of cardboard, Styrofoam, straw, hay and many other homogenous materials. They are easy ...

hydraulic press / double-action
hydraulic press

EV 1000 Hydraulic press of 1000 tons with 5 cushion cylinders, upper triple action of 100 tons, automatic movable table die change system By means of the high advanced FEM (Finite Element Modeling) calculation technologies and ...

See the other products
GALDABINI
hydraulic press
hydraulic press
800 Ton

By means of the high advanced FEM (Finite Element Modeling) calculation technologies and the extensive use of parametric CAD, each machine is customised according to the specific requests, V 800 800 ton - hydraulic press with 5 independent ...

See the other products
GALDABINI
hydraulic press / workshop
hydraulic press
max. 200 kN | DL 100 - DL 200

The Hydraulic workshop press DL 100 - DL 22 Series is manufactured by Jesan Kovo s.r.o. The product has compact design and the weight ranges from 110 kg up to 160 kg. The maximum force ranges from 100 kN up to 200 kN and the maximum ...

stamping press / hydraulic / bench
stamping press
10 - 681 t | G series

Cylinder mounting adaptor allows lateral positioning along rails. Mounting holes for easy mounting to fixed surface.

stamping press / hydraulic / double-action
stamping press
10 - 1 226 t | GVLP series

Heavy frame increases strength and lifetime. High quality power source and cylinder can surely provides high performance, trouble free operation. Moveable pump table on press allows for easy side loading for large workpieces. .

Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.