Hydraulic presses

159 companies | 1030 products
Filters
  • What’s new?
    Submit

The HF series is a series of hydraulic presses manufactured by Ficep. Designed with a monolothic structure, it has a steel facade making it optimal for use for hot forged...

The Hydraulic presses HD is specifically intended for pressing and forging applications. It is used for machining hot extrusion of materials which necessitates an indissoluble...

{{productDetail[14587]}}

Die makers you need prepared presses to try and test the dies being manufactured in a factory, in order to satisfy customers' requests. Fagor Arrasate offers...

Die spotting presses are used with various applications, especially for the verification and manufacturing of molds and dies. In addition to the dimensions defined according to the mold or die to be...

The FAGOR Arrasatehas is recognized for plastic and composites forming lines for processing thermoplastic and fibre fortified moulded using hydraulic press consist of active parallelism control...

The hydraulic forging press can operate various applications through the use of its extreme pumps for fast forging. It can hold objects of 63,000 KN up to 150,000 KN and bolsters of 5000 x 3000 mm. It is flexible...

{{productDetail[68673]}}

Hydraulic press lines are mainly used to manufacture a wide variety of parts in small to medium lot sizes. Depending on the required forming operations, the line typically consists of four to six single presses. The production process is fully automated from the blank to the...

Description

Fiber-reinforced plastics offer a great deal of scope for design, as well as considerable functions with minimum component weight. Use the potential of modern plastics and rely...

Description

The sinusoidal 2-point transverse shaft eccentric drive in the crown produces the ideal mass counterbalance by means of the contra-rotating main gears with herringbone gear teeth. Here Schuler uses the...

These hydraulic transfer presses from Schuler packs in a big opening in the uprights and allow flexible manufacturing of parts through transfer dies. The high output...

The Hydraulic press line are machines manufactured by Schuler. Comprising of four or six single presses, the hydraulic press lines provide a completely automatic operation. It has an integrated conventional...

{{productDetail[13229]}}

AIDA’s Tandem Stamping Press Lines: The factors that affect the...

{{productDetail[5598]}}

Are available with four different power ranges, from 50 to 150 tonnes.

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming, etc

Now feature a wide range of uses including the possibility of incorporating these machines in automatic production lines.

Consist of an electro welded structure made solely of ST-52.3....

We have designed the cambering presses with 3 different power ranges, from 150 to 300 tonnes.

Specifically designed to perform works involving the straightening and bending of profiles, bars and beams.

Consist of an electro-welded structure made solely of ST-52.3 steel. They are stabilised and machined at the end of the structural welding process to ensure perfect parallelism...

Are availablewith 3 different power ranges, from 80 to 150 tn

Specifically designed to perform work involving deep-drawing, stamping, die-cutting and forming for medium and high volumes.

Now feature a wide range of uses including the possibility of incorporating it in automatic production lines.

Consist of an electro welded structure made solely of ST-52.3...

We have designed the T-series hydraulic presses with 3 different power ranges, from 150 to 300 tn

They are especially designed for the straightening of electro welded structures and flame cut sheets

Their design facilitates the loading and unloading of large volume structures. It allows the different pressing points to be accessed without the need to move the part thanks...

The HIDROGARNE E series is a hydraulic workshop press that is capable of pressing 2 different power ranges of 50 to 80 tonnes. This machine is specifically manufactured for applications related to extraction, threading,...

{{productDetail[37839]}}

Motor / hand operated hydraulic workshop press with moveable cylinder and 2 speeds - 300 Ton M/H-M/C-2 D=1750 mm.

This hydraulic workshop Profi Press is extremely robust, made of quality steel and the hydraulic system is very precise,...

The hydraulic broaching press from RHTC is exclusively made in the Netherlands and can be used for linear broaching. Linear broaching is a highly productive, machining process where the broach is operated linearly against the surface of the workpiece to remove internal...

This hand-foot operated Profi Press workshop press can be used for assembly or straightening work and is also excellent for testing workpieces.

These manual Profi Presses can be used by garages, truck companies and agricultures for example.
These hand-foot...

This hand-foot operated Profi Press workshop press can be used for assembly or straightening work and is also excellent for testing workpieces.

These manual Profi Presses can be used by garages, truck companies and agricultures for...

This hand-foot operated Profi Press workshop press can be used for assembly or straightening work and is also excellent for testing workpieces.

These manual Profi Presses can be used by garages, truck companies and agricultures for...

{{productDetail[40085]}}

Hydraulic press to four vertical columns, specially designed to work molding of SMC.
The press in question is designed expressly for the operations of forming of plastics sheet to hot.
Horizontal slider of the lower bank, in order to allow easy loading of the molds in the machine and unagevole extraction of the finished piece in the event that its dimensions are such that it can...

Hydraulic press piston Electrically
quick motor
double speed
Automatic exchange
Lever control bi-manual and contemporary

THRUST 200 Ton
MAXIMUM STROKE 500 mm
HEIGHT OF FIXED ...

TECHNICAL SPECIFICATIONS

THRUST FORCE 130 Ton
MAXIMUM STROKE 500 mm
LIGHT BETWEEN PLANS OPEN 800...

THRUST FORCE 150 Ton
MAXIMUM STROKE 700 mm
HEIGHT OF FIXED 900 mm
SIZE FIXED 1000x1000 mm
DIMENSION OF THE PLAN MOBILE 1000x1100...

HYDRAULIC PRESS MOTOR SPEED AND FAST WITH DOUBLE LEVER AND CONTEMPORARY BIMANUAL

Art. 318
- Ton. 30 - Light 700 mm
- Semi-automatic...

{{productDetail[126803]}}

Wood forming technology (for plywood, MDF boards, floor panels, etc.) with the use of ZEMAT brand Radio Frequency (RF) Generators and custom designed Hydraulic Presses is the best and the most economical solution for manufacturers making short series of products and requiring energy efficient, fast and easy production process.
Thanks to the use of RF technology the cost of tooling...

{{productDetail[40251]}}

AGME produces a standard versatile range of Hidraulic Presses (PH-15, PH-30 and PH-60)that meets most assembly requirements: punching, bending, riveting, cutting,...

The Agme hydraulic press program allows the machines to be adapted to the clients´ requirements. The engineering...

{{productDetail[16221]}}

The AP 250 is manufactured by Alfra, and is a punching tool that has been specifically developed to be use in rapidly punching out round, square, rectangular or particular forms without...

The AP 400 is a machine used for punching out round, square, rectangular or special forms within a short period of time. This operation is achieved without any pilot drilling and is applicable...

The stationary punching equipment is manufactured for control cabinet and switchgear manufacturers, for fast punching of round, square, rectangular or particular forms in sheets and control cabinet doors of up to...

Developed for control cabinet and switchgear manufacturers, this stationary punching machine offers quick punching of round, rectangular, square or special forms on sheets....

The AP 800 is manufactured by Alfra, and is a stationary punching equipment that has been specifically developed to used in the production of control cabinets and switchgears. The unit...

{{productDetail[19772]}}

MIB Hydro's DEV/Laboratory Compression Presses are part of the company's product line of hydraulic and electrical presses. The devices are designed out of both composite and raw materials,...

The unit is a triple acting hydraulic arch press that has been specifically developed to be used in product jet...

The maxi forming press from Mibhydro is a 2 feet arch press that...

MIB Hydro's Double-Acting Hydraulic Arch Presses are generally utilized in several fields of application,...

Stamping presses are designed in accordance with the needs of industrial production tool (straighteness, production rate...

{{productDetail[8585]}}

The P 200 E series is manufactured by Collin, and is a bench-top platen press...

The P/M series is range of testing presses from Drcollin. The accurate control of selected parameters,...

The P 200 MV and P 300 MV are hydraulic laboratory forming press for plastic parts developed...

Presses developed by COllin have a temperature range of 450 degrees...

{{productDetail[50066]}}

Meet with EC rules ( 3 CE type notifications)
- Quick...

EMG Presses' Mechanical Presses are designed and manufactured to comply with international...

Emg Presses manufactures a wide variety of automated presses that complies to EC...

The 45T model is manufactured by EMG Presses, and is a mechanical press that...

The 80 T is mechanical press manufactured by EMG Presses. The unit is ensured to meet the...

{{productDetail[8470]}}

IAG presents hydraulic press line for friction lining. It is suited for the manufacturing of medium-sized batches. A production centre is formed by combining up to 5 standard roundtable machines and 6 pressing units or stations on every roundtable. This...

This product is suitable for the production of very small batches, while the highly flexible system consists of 2 units with no less than 6 stationary presses arranged in line. In addition, each of the presses operate independently,...

Two independently operating production units serving a common press station. Output at a 5-second press-cycle results in more than 500 pads per hour.

Automatic short-cycle press, for the production of small and mediumsized...

{{productDetail[64222]}}

This motor-operated press can be activated by means of a three-position distributor. This product is a type of a double-acting cylinder which is equipped with...

Motor-operated presses from Mecamaq are run by three positions-distributor. It has a double acting cylinder which is designed with a double guidance along its...

The DE-150 is a double-action hydraulic press generated through a motor consisting of 3 positions distributor double-acting cylinder. This cylinder is integrated with...

This motor-operated press can be activated by means of a three-position distributor. This product is a type of a double-acting cylinder which is equipped...

This machine comes has a motor-operated presses by means of a three positions distributor. It also features a double acting cylinder with double guidance, anti-wear strips and bronze...

{{productDetail[57501]}}

Our electronic mould spotting try-out presses are innovative and unique. Recognised world-wide for their high quailty and precision, they continue to provide maximum reliability years after purchase. Consistently the Millutensil presses offer outstanding advantages to all die and mould manufacturers.

ADVANTAGES
- Quality dies and moulds are produced quickly
- Fast checking, adjustment...

Our electronic mould spotting try-out presses are innovative and unique. Recognised world-wide for their high quailty and precision, they continue to provide maximum reliability years after purchase. Consistently the Millutensil presses offer outstanding advantages to all die and mould manufacturers.

ADVANTAGES
- Quality dies and moulds are produced quickly
- Fast checking, adjustment...

{{productDetail[27803]}}

The PHC series is a line of hydraulic presses manufactured by AMOB. This device ensures precision and quality. The unit comes with reliable, productive forming...

Amob's hydraulic press is built with a heavy-duty, welded H-frame construction. It features minimal deflection and an extended tool life, as well...

The AMOB has manufactured the PH4C hydraulic press to meet various needs of the user, such as table size, daylight opening, stroke and capacity....

{{productDetail[61071]}}

The P2MM+PVM is a special press manufactured by Sertom. The unit is characterized by various features, such as a specific...

{{productDetail[28331]}}

The WELDUM series, manufactured by Comi Spa, is a hydraulic press specifically engineered to be used for corner vulcanization. A strong...

The presses series are small-size presses that are intended for laboratory applications/tests. They are...

{{productDetail[50365]}}

Built according to customer needs and specific operating
requirements.
Equipped with safety...

{{productDetail[68854]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation