|
|
| Products 121 to 136 of 136 |
CX50
FEATURES & BENEFITS
- An EPA Tier III compliant, compact 3.3-liter diesel engine features superior performance and achieves up to a 20% reduction in fuel consumption.
- Tusk's unique CLSS hydraulic system contributes to lower fuel consumption and higher productivity.
- A new standard wet disc brake system is able to greatly reduce overall downtime and maintenance costs while delivering lower operating cost over the life of the forklift.
- LPG and Dual Fuel applications utilize the EPA Tier II Compliant, 4.5 liter TB-45 engine.
|
|
|
|
|
|
The Bendi i3 - IC Truck
Almost everything that makes the battery-powered Bendi the right choice for so many applications applies equally to the Bendi IC. Both are equally at home on the loading dock, or in the warehouse. Both can go from trailer to plant floor to narrow aisle storage without staging. Both navigate narrow aisles with the speed and agility that allow Bendi operators to move safely into tight spots others can't reach. The main difference is that our LP-Powered Bendi can be refueled in less than 5 minutes.
This narrow aisle forklift features a GM Vortec internal combustion engine designed specifically for LP gas. Refilling or removing and replacing the rear-mounted LP tank is easy, fast, and safe. The 2.4 liter four-cylinder engine is easily accessible under the insulated seat base. The engine is rated at 67hp at 2400rpm, and meets or exceeds emission standards for its vehicle class in all 50 states.
The Bendi IC measures just 48" (1200mm) wide, can climb 15% grades, turn in 9 foot (2.74m) intersecting aisles, and stack 48"x40" (1200mm x 1000mm) loads in 6-1/2 foot (1.98m) aisles.
|
|
ReachStacker (RS45-46) Series
The Hyster ReachStacker is available in both container handling (CH) and intermodal handling (IH) versions for high density container stacking applications up to 5-high and 3-rows deep.
This machine has been designed to achieve maximum space utilisation on container terminals, thanks to outstanding manoeuvrability, superior handling speeds and unrestricted stacking capabilities, in an all-in-one package.
|
|
Reach Stackers 45T
Model : RSH4528-V0
Load Capacity(first row/second row/third row) : 45000/28000/14000 kg
Load Centre(first row/second row/third row) : 1800/3850/6400 mm
Container number of high-level(first row)/Container height : 5/8’6’’(9’6’’)
Lifting Speeds : 280/420 mm/s
|
|
|
|
|
|
ReachStackers
Reach Stackers with combi attachment
Reachstackers with toplift
Our latest generation of reach stackers builds on many years of development work and close partnership with our customers. This means that we can offer a highly modern lift truck based around carefully selected components and a fuel-efficient engine that delivers high torque even at low rpm. You also get access to a string of innovative solutions to simplify your work. One example is the load-sensing hydraulic system with variable piston pumps, which ensures the optimum balance between engine power and hydraulic demand for any given lift.
Flexible solutions for greater productivity
By combining the best components in the optimum way we achieve a well-balanced relationship between the engine and hydraulic systems. This is something that you will appreciate in the form of superb manoeuvrability and the way in which all functions are carried out quickly and with the greatest precision. As a result our reach stackers can lift and lower goods at a faster speed than most of our competitors' machines. Another benefit is that SMV reach stackers can easily be adapted to handle different types of goods with the aid of a range of optional equipment.
Designed around the operator
We have given special attention to the design of our operator's cabs. Our machines probably have the best cabs on the market in terms of visibility, ergonomic design and comfort. The cab is designed so that the operator can easily reach all the controls and check all functions at a glance. This allows the operator to concentrate on goods handling and hence work more efficiently.
|
|
JCB Rough Terrain Fork Lifts are reliable, versatile and combine high mobility with high lift capacities to give superb productivity in all rehandling environments.
|
|
|
Sectional load : 450 kg (3 people) or 230 kg (2 people) Fly jib horizontal (150°) and vertical (140°) arc movement Max 65ft 7in (20 m) horizontal outreach. Gradeability up to 40%. Hydraulic differential lock and 15 in (38 cm) ground clearance for improved rough terrain. Continuous 360° turntable rotation. Proportional and simultaneous controls for higher speed and accuracy. Robust, reliable and easy to maintain design.
|
|
With a telescopic boom instead of a mast, the JCB teletruk gains significant advantages over conventional fork lifts. With its ability to reach, loads can be lifted and placed quickly and easily in a wider range of situations, such as over obstacles.
|
|
Mini-digger
Mini-digger from 760 kg to 7430 kg weight and up to 51,5 kn shovel power.
Mini-loaders
Mini-loaders with 375 to 1021 kg work load capacity.
Cement mixers
Cement mixers with 2500 to 5500 m3 mixing capacity.
Telescopic manipulator
Telescopic manipulator with 2500 to 5000 kg capacity
|
|
The KingLifter offers:
- A loading and unloading system for your vehicle
- Independent transport
- Up to 30% time saving
- Up to 35% increased sales per truck possible
- A means to provide service when and where needed
- Stronger ties with your customers
- Less risk of damaging your freight
- Better employment conditions for your driver
|
|
The MOFFETT M1 range, is now stronger than ever before! Thanks to the new 26 Hp Kubota engine complete with an inline pump, this replaces the existing 18Hp Kubota engine. The new M1 offers a newly improved ergonomic design as well as a range of features that can be tailored to meet your needs.
The M1 with a lift-capacity of 1500 Kg and the New M4 with a lift-capacity of 2000 Kg for this application, provides the solution to transferring loads upto 2000 Kg to hard to reach destinations, for example, city distribution. The M1 has the ability to work on paved surfaces and firm, off-road conditions like gravel and grass, where the M4 goes even further than that! Our innovative design means that all MOFFETT Forklifts can be carried on the rear of a truck or trailer with no loss of load space. There is no waiting for local off-loading equipment which means faster, safer and more cost effective deliveries.
|
|
|
The B 152 M is the perfect transportable forklift for a wide range of loading and unloading applications; the setup time of only 30 seconds permits easy and efficient loading and unloading within the shortest time.
|
|
|
|
|
|
The Drexel "R" series was designed for the military to move both pallets and missiles. The R60, with pneumatic tires, are unique in the world of forklift trucks. They work on practically any improved surface and also climb ramps - 15% RAMPS. As very narrow aisle (VNA) machines, they can operate in 6-8 foot aisles with most pallet loads. They can also transport and store long loads. Landoll presently has over 8,400 machines in operation with an increasing world-wide dealer network. Landoll is a supplier to both commercial and military customers around the world. Available with LP gas and diesel. Contact Landoll Corporation today for your forklift needs at US number 800-428-5655 or 785-562-5381 and we can solve your warehouse storage challenges!
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. **
|
|
| ... products without technical information |
| |
|
|
Engine powered forklift trucks (diesel, gasoline, LPG)
