- Metrology - Laboratory >
- Inspection and Monitoring >
- Inspection machine
Inspection machines
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... dents and so on. This Is one of the most important inspections at the end of the production process. It can be simply integrate with offering accurate measuring results. It is ideal for all common TU machine, ...
... is detected by cameras. The measuring system contains fully automated integrated calibrations. The patented process of the calibration takes approximately 5 minutes. The visualization software of the profilometer ...
... transported automatically, CT1000 moves precisely to the critical pattern position, or the defect position detected by the defect inspection unit. Three-dimensional SEM observation can then be performed using a tilting ...
Inline Review SEM which contributes yield enhancement with high speed ADR and accurate ADC • Enhanced SEM image resolution for cutting-edge device development and mass production • New in-situ solution of yield control which is quantified ...
... control. Optics • New optics provides high sensitivity inspection Wafer Stage • High speed stage provides high throughput inspection Applications • For device manufacturer: incoming inspection ...
Width inspection range: 80 mm
The Brabender FQA system visually evaluates the quality of blown and flat films. It is suitable for the development of new plastics and quality assurance in the processing of recycled or biodegradable polymers. The FQA unit is attached ...
... is Waygate Technologies' easy to use entry-level microfocus X-ray inspection (AXI) system with strong performance that is designed for the special needs of the high-resolution inspection of electronic ...
Waygate Technologies
... wide spectrum of 2D and 3D offline inspection tasks: R&D, failure analysis, process and quality control. The Phoenix|x-ray X|act inspection software offers easy to program CAD based µAXI ensuring ...
Waygate Technologies
Industrial Scanner featuring unparalleled flexibility and efficiency Advances in inspection technology have yielded a highly versatile high-resolution system for 2D X-ray inspection and 3D computed tomography ...
Waygate Technologies
High-resolution 3D X-ray Microscopy Our SKYSCAN 1272 can nondestructively visualize up to 209 Megapixel (14450x14450 pixels) virtual slices through objects, more than 2600 such slices after a single scan using a 16-megapixel camera in ...
Skyscan 1275 Fully Automated High-Speed X-ray Microtomograph X-ray micro-computed tomography is one of the most advanced methods for getting 3D insights into samples of any material, any shape, and any size with little to no sample preparation. Bruker ...
Width inspection range: 280 mm
Height inspection range: 110 mm
VisioPointer® reliably automates inspection processes in food packaging lines using leading vision technology and multiple inspection types. Its intuitive interface and intelligent data usage allow operators ...
Minebea Intec GmbH
The Dymond Series of X-ray inspection systems is extremely versatile. Featuring 4 models it is able to cover the majority of applications for inspecting packaged products. With belt widths up to 800 mm it is ideal for ...
Minebea Intec GmbH
X-ray inspection system - Dylight The X-ray inspection system Dylight guarantees extremely high levels of safety for your packaged food. This true ‘Plug and Play’ solution combines all functions in one ...
Minebea Intec GmbH
Tablet packaging/foreign material inspection machine FLASHPATORI FP600 By replacing the inaccurate visual inspection into the electronic inspection, unmanned packaging ...
CKD
Eliminates the inner tensions of the crankshaft caused by the welding process. We recommend to inspect once more the crankshaft alignment before further processing
AZ spa
AZ spa
AZ spa
3D SPI Laser Line Scan Method Fastest Inspection Speed in the Industry Real 3D Image Inspection Irrelevant to Color, Material, Surface Roughness Automated Measurement of PCB Warpage Automated ...
The PRO Series Case system is designed for non-contact, non-destructive, 100% automatic container inspection through a sealed cardboard and/or shrink wrapped case. The system offers the option of acoustic or proximity ...
... optional inspection. Fill_xr requires a User Interface for operation and is compatible with the T550 and PRO Series User Interfaces. Fill_xr Features • Detects overfill and underfill inspection ...
... optional inspection. Fill_ir requires a User Interface for operation and is compatible with the T550 and PRO Series User Interfaces. Fill_ir Features • Detects overfill and/ or underfill inspection ...
... , length, fiber diameter, number of bump defects. Specifications ● Adaptive fiber diameter range: Ø 0.10~Ø 0.250mm ● Machine winding speed: 0~800r/min ● Length error: ≤0.3% ● Tension control range: 8~40g ● Tension ...
... speed up to 120 cards/min (7,200 cards per hour) - Capable of inspecting 1 μS/cm conductivity solution such as WFI, glucose, and amino acid - Small footprint and does not take up much speace - Entire body inspection ...
Nikka Densok Limited
... contamination. 1 μS/cm conductivity products such as WFI, glucose, and amino acid can be inspected. Non-destructive method of inspection is suitable for inspecting vaccines and live virus products. In-line and automatically ...
Nikka Densok Limited
... but HDG-2 is capable of adjusting to the flexible serface. It is a great solution for inspecting body of the bag. This machine can handle from 50ml up to 6,000ml bags. 21 CFR Part 11 compliance package is optional.
Nikka Densok Limited
Output power: 60 W - 150 W
Width inspection range: 0 mm - 240 mm
Height inspection range: 0 mm - 120 mm
... inside the machine is reduced due to moisture or dust. It can prolong the lifetime of its electric boards, switches, etc. Comparison of waterproof range ● Due to IP66, it is washable and can be kept sanitary. It prevents ...
SYSTEM SQUARE Inc.
Output power: 60 kW - 150 kW
Width inspection range: 220 mm
Height inspection range: 120 mm
... with the new X-ray sensor (SX2-2353HW), a further high-sensitivity inspection has been achieved compared with the SYSTEM SQUARE standard system (SX2-2554W). By comparing the inspection images, it can ...
SYSTEM SQUARE Inc.
Output power: 60 kW - 150 kW
Width inspection range: 0 mm - 240 mm
Height inspection range: 0 mm - 120 mm
SX2-2554HW Highly stable relative mass inspection achieved with a new X-ray sensor Stable mass inspection achieved with a new X-ray sensor The relative mass inspection can be made ...
SYSTEM SQUARE Inc.
Height inspection range: 300 mm
Convey weight capacity: 15 kg
The nanoVoxel-2000 system is a high-performance imaging system that uses a sealed X-ray source. The X-ray source is maintenance-free and the sample chamber can accommodate large -size samples, is capable of expanding the in-situ loading ...
... extrusion contours. Our Rubber & Tire applications division works closely with System Integrators & Original Equipment Machine Suppliers and Tire Manufacturers to deliver the most effective solutions for their particular ...
... preparation prior PVD-CVD treatment and Surface stripping Automotive, aeronautics and Defense industry Medical industry,etc.. . The machine performs excellent cleaning without any health and safety issues and it is a ...
Incident light microscope for wafer inspection granite base in portal design incident light tube with lens turret vacuum waferchuck
... screen High energy X-ray High energy X-ray enable a broad range of inspection target (80 kV). Can be used for the inspection of thick metals, shoes soles etc. Enlarged in-tunnel inspection ...
Rigaku
... and THTs. • 7 µm High Performance Inspection, 20% Performance Improvement compared to previous model • New motion controller, EtherCAT, for real-time measurements and ease of maintenance • AI-Powered Inspection ...
... fastest cycle time. Image capture, processing and inspection algorithms are executed in parallel, minimizing waiting times. Saki's unique soldering inspection algorithm improves pass/fail inspection ...
The automated visual inspection platform VISION CAV is designed for a customized, fully-automated inspection of particles and cosmetic defects of vials with liquid or lyophilized products. The vision ...
WILCO AG
... NIV is an inspection platform for lyophilized products. It uses a high speed near infrared spectrometer that allows 100% inspection of lyophilized products at production speeds of up to 600/min. The ...
WILCO AG
... required. The VARIO MTX is a modular inspection platform that allows a customized setup for the quality control of pharmaceutical packages. The VARIO MTX is an inspection platform for fully automated ...
WILCO AG
Width inspection range: 50 mm - 120 mm
Height inspection range: 50 mm - 140 mm
Convey weight capacity: 10 kg
Aton is an innovative full 3D inspection solution based on Artificial Intelligence that revolutionizes the concept and standards of Automatic Optical Inspection systems, covering SPI and post reflow production ...
... components allows the solder balls detection. Compared to manual inspection, the results of Dragonfly THT Next> series are operator free, but always act objectives and reproducible. The inspection ...
... Laquer Inspection. The full-scan imaging of the PCB will ensure proper detection of faults. Compared to manual inspection, the results of Dragonfly CC Next> series are not operator dependent, but always ...
All-in-one inspection machine for tablets, capsules and softgels with inspection capacity up to 720.000 products / hour. • Difficult product or critical quality requirements demand ...
... safety. In contrast to the widely developed particle inspection in liquids, foreign particle inspection in powders and granules is technologically more complex. Our fully automated inspection ...
... blister pack inspection station used for 100% quality check after packaging of orthopaedic implants. A robot handling system moves a blister pack to the turntable of the inspection station-no. 1 for blister ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining