|
|
|
To leave d’ a standard base, for the needs related to the schedule of conditions customer, various functions and various installations can be realized.
|
|
SOCOPRESSES is with same, in partnership with you, to write the schedule of conditions related to a problem arising.
The selected technical solutions will be validated either by tests, or by preproductions on prototype tools.
|
|
STANDARD FEATURES Steel welded frame
- Hydraulic system Bosch / Rexroth
- Electrical parts Siemens / Telemechanique
- Two hand control Start Button
- Emergency Stop Button
- Induction hardened and chrome plated column rods
- Two speed piston for moving plate at fast approach speed
- Automatic / Manual
OPTIONAL FEATURES
- Light curtain for safety
- Conformity to the EC Directives (CE)
- NC control
|
|
|
|
|
|
Composite hydraulic presses
Power built to measure
Those who use large-sized hydraulic presses often have specific problems to solve that are sometimes linked to both existing dies and the particularity of the parts to be produced. Working alongside clients in the development of designs that meet both their present and future needs by intervening with the appropriate personalization is just a part of the universally recognized expertise vaunted by our technical staff.
Technology and flexibility in evolution
In a world characterized by continuous and frenetic development, new needs that demand new solutions arise every morning.
Choosing those solutions
Our ability to listen to our clients, propose alternatives based on experience or innovation, and skill in identifying the best course of action to take together make us the solid partner clients need.
Unquestionable reliability
Hardly the result of a day, experience and quality are accomplishments achieved only through years of hard work and steady improvement. Omera is justifiably proud of the results obtained, the many applications of its products around the world, and its reputation in the market.
|
|
|
Hydraulic, complete with work counter device and running with single cycle or automatic cycle with adjustable break time. The machine is provided with a pump for lubricating the guides, which are made of heat-treated casehardening steel. Stroke 350 mm. There are 3 speeds, that can be selected through a simply commutator, of which 1st speed is 20 mm/sec. , 2nd speed is 35 mm/sec. and 3rd speed is 40 mm/sec. Quick locking of the tools, prearranged for accepting all the tools listed on the brochure.Stroke cylindre directly positioned on the theoretical work axis of the tools.The electrical board is built in accordance with C.E.I. regulations and it is already prearranged for accepting the automatic bars feeder AL/02.
|
|
Hydraulic, complete with work counter device and running with single cycle or automatic cycle with adjustable break time. The machine is provided with a pump for lubricating the guides, which are made of heat-treated casehardening steel. Stroke 250 mm. There are 3 speeds, that can be selected through a simply commutator, of wich 1st speed is 15 mm/sec. , 2nd speed is 55 mm/sec. and 3rd speed is 70 mm/sec.
Quick locking of the tools, prearranged for accepting all the tools listed on the brochure.
Stroke cylinder directly positioned on the theoretical work axis of the tools.
The electrical board is built in accordance with C.E.I. regulations and it is already prearranged for accepting the automatic bars feeder AL/02.
|
|
|
|
|
|
Over forty years' experience in the sector allows us to offer a competitive product in constant renewal. Here we focus on the very new DIGIT presses:
T.70 DIGIT 1 AXIS /T.70 DIGIT 2 AXIS
T.100 DIGIT 1 AXIS /T.100 DIGIT 2 AXIS
1 AXIS and 2 AXIS DIGIT versions respectively of models T.70 Super and T.100 Super, from which they recover the solid structure, the bending presses T.70 e T.100 DIGIT allow the program and micrometer stroke adjustment through CN electronic model Clock2.
Here are their main features:
- hydraulic single block power unit at servo valve positioning and with the possibility of adjusting the pressure
- automatic conventional cooling system of the hydraulic unit (COOL)
- 35 touch screen key keyboard, led 16x2 characters, an "X" axis stroke (punch), an "Y" axis stroke side gauge positioner;
- 550 memory programs in "Y" axis and in "X" axis, each of the 2 axis has a program with 15 different lines (repeated 999 times)
- liquid crystal monitor at high resolution;
- selection of 5 languages to program;
- measurements in "inches" and "millimetres";
- program selector: manual, semiautomatic, automatic;
- linear line measurement system for "CN" at high resolution and unlimited use;
- precision positioning: ± 0;1 mm
- approach feed speed adjustment through flow control valve electrically driven and CN automatic control.
Other models of SIMASV bending machines in sections:
HORIZONTAL PRESSES
HORIZONTAL PRESS BRAKES
HORIZONTAL HYDRAULIC PRESS BRAKES
|
|
|
A short stroke hydraulic press designed for blanking, bending and embossing operations. Manufactured in both welded construction and with pre-stressed tie rods depending on the size. Press force range max 160 000 kN and max 4000 mm wide press table.
|
|
6T press
Automatic blanking and bending press with toggle, featuring integrated programmable controller.
Designed as a stand-alone unit, yet ideal for integrating into a production line, automated with servomotor, with or without integrated numerical control.
Single or progressive dies (blanking, pressing) can produce several thousand parts an hour - exceptional reliability, precision and durability.
Material can be fed individually, in bar stocks or in strips. The machines comply with CE safety standards, are silent and clean, and can even be used in clean rooms.
|
|
Fine blanking press for precise stamped parts
Fine blanking press equipped with Decoiler, Roll feeder and straightening device*, fine blanking press and scrap cutter. On this unit there are produced precision stamping parts
Techn. data:
Coil weight: up to 2500 kg
Material: St
Thickness of material from 1,5 up to 6 mm
Width of material up to 300 mm
Production capacity: 10 up to 50 strokes per minute
Press capacity: 2000 kN
|
|
Hydraulic press of routing (250 kN) equipped with a revolving plate.
Hydraulic press with swan neck of 100 kN with butted of race and revolving plate.
|
|
Optional extras for standard C-frame and double sided presses:
Ram guiding by 6 and 8 face slides.
Variable working speed.
Changing dimensional specifications.
Additional effects in the ram.
Increased performance.
Blanking damper.
Device for maintaining alignment between ram and bolster
(for double sided models).
10" colour control screen.
Virtual barriers.
Electronic feed and peripheral line (charger/destacker...).
Safety lock over the whole stroke.
Rapid die-changing system.
Hanging control console and many electrical control options.
Modem for remote maintenance.
|
|
|
|
|
|
Hydraulic C-frame blanking press (HZS)
Hydraulic C-frame drawing press (HEZ)
Standard version:
* Safety 2-hand control in accordance with UVV (German accident prevention regulations)
* Overrun control device NKS with electrical display
* Oil backflow filter with gauge
* Oil cooler (air / water)
* Engine hours meter, stroke counter
* Ram return stroke through pressure/time switch. The holding load of the ram can be selected under pressure between 0.3 - 3 secs.
* Force for ram and drawing cushion infinitely adjustable (approx. 10 - 100%)
* Ram speed infinitely adjustable in the drawing range (min. = pressing speed)
* Column-guided ram plate
Accessories:
* mechanical cushioning
* Light-barrier control with single and two-stroke, as well as protective barrier
* Motor-driven backward movement of the drawing cushion
* Mechanical stroke limitation of the ram, motor-adjustable
* Hydraulically controlled ejector in the ram
* Hydraulic tool clamping
* 6-fold guided ram / column-guided ram plate
* Automatic lubrication for ram and drawing cushion guides
* Oil cooler (air / water)
* Oil pan for oil leakage fitted underneath the press frame
|
|
This model of press has been engineered for a big aircraft company to straighten wings and others parts.
The cylinder is fitted with a digital follow meter which indicates its position throughout its travel. On contact with the part to be straightened, the operator positions the zero point and from here uses this operation to follow the lowering of the cylinder on the meter. A bottom dead center can be programmed.
|
|
* 60 Tn power.
* 450 x 600mm lower bench.
* 350 x 500mm supper bench, with double guidance.
* 225mm collar depth.
* 300mm upper bench route.
* 400mm opening between benches.
* 2 speeds, approximation and operation.
* Course control via end of track.
* Operation via double two-hand push button.
* Machine weight: 3,000Kg.
|
|
The MX340-G hydraulic press provides a wide range of matrices to cover the majority of requirements in any working situation.
We recommend that you consult the catalogue of available matrices and optional accessories.
The MX340-G complies with the European directives an regulations for the manufacture of MACHINERY.
|
|
Today, our machines all are equipped with a terminal operator (IHM) of the tactile or traditional type. That makes it possible to safeguard the whole of the parameters of configuration, high race, slow speed, low of race and force (water pressure). The adjustment of the pushing force, as well as decompression are managed by a valve of pressure proportional.
By this principle, the changes of campaigns are simple and fast, we can safeguard approximately 50 programs according to the memory automat.
The hydraulic machines are equipped with distributers CETOP 06 or CETOP 10, the whole of the hydraulic material is assembled closest to the cylinder.
|
|
AddisonMckee is pleased to offer a brand new line of c-frame hydraulic presses in 25-, 50-, 75- and 100-ton models. Utilizing proven and standard design criteria, AddisonMckee presses can be tailored to each customer’s most specific applications and feature heavy duty steel weldments and a superior guidance system that provides advanced precision and reliability.
Aware that one of the key considerations when choosing a hydraulic press is the amount of force necessary to perform the function required, as well as the operation speed desired, AddisonMckee models provide the best in value, speed, durability and reliability.
|
|
|
|
|
|
NC and Conventionalm Hydraulic combine "C" frame presses
BuPower
BuPower has too many functions that combined from a lot of sheet metal working machines. BuPower is fast and user friendly when doing the work. Of course in high accuracy and efficiency.
Bending, punching, notching, cutting, forming and also more operations are available in Bupower.
BUTEK Company is a manufacturer of special purpose machines for Automotive Industries. BUTEK is experienced of sheet metal forming process and now we represent BuPower Combined Hydraulic Press Brake.
BuPower bring many choices to pres brake operators with NC and Standard types.
In all types you will find Standard device; stroke shaft and backguage; hydraulic pressure switch that can be easily set up by operator to reach the positioning and bending precision.
With robust "C" typemain frame and large work table is appropriate for different types of tooling.
Base of BuPower design is including safety, useful and serviceable use with standart and optional devices.
BuPower is a special design for our customers that are manufacturer of electric cabinetry, panel, medical equipment, industrial kitchen equipment, white goods, automotive industries and other OEM's
Optional Touch panel enables an easy achieve and control of all steps. Control panel can be inselection of different languages. It's possible to go help page at any time on the screen.
High Quality Ball screw and precise guide shafts are used at standard backguage in all types. This increases the safety and precision of BuPower
In order to get high quality products, standard and optional tools are specialy made. So, tools cabn easily be set up.
|
|
STANDARD FEATURES Steel welded frame
- Hydraulic system Bosch / Rexroth
- Electrical parts Siemens / Telemechanique
- Two hand control Start Button
- Emergency Stop Button
- Induction hardened and chrome plated column rods
- Two speed piston for moving plate at fast approach speed
- Automatic / Manual
OPTIONAL FEATURES
- Light curtain for safety
- Conformity to the EC Directives (CE)
- NC control
|
|
Models available:
=>Pressse hydraulic of 100 kN with butted of race and revolving plate.
hydraulic =>Press of stamping to swan neck doubles effect: 600 kN + 250 kN.
hydraulic =>Press 250 kN of rectification to swan neck to sensitive control.
|
|
|
|
|
|
Hydraulic C-framed presses
Lower cost per part produced
The real saving here can be easily counted in production cost per part! The higher your hourly output is, the lower your unit production cost will be: in just a word, the advanced solutions built into Omera presses guarantee better productive performance.
Lower operating cost
Savings in operating costs are guaranteed because machine capacity can be exploited to the fullest without dead times caused by breakage or malfunction and maintenance operations can be programmed in advance with the assurance that everything has been made as simple as possible.
Quality = less production scrap, less wear on the dies
The first benefit of the trademark structural strength and constructive accuracy of Omera presses ensured by the highest design and manufacturing standards is the optimum performance of the tools, which can be translated in terms of defect-free production thanks to the uniform distribution of force throughout the productive process.
|
|
C-Type (Open Front)
Especially small-parts manufacturing
Easiness for handling
- RHCP 100
- 1.000 kN pressing capacity
- Double action (with die-cushion)
- CNC-control-system
- Cutting-Shock-Absorbing-System
|
|
Neff C-frame presses
Efficient and versatile
Our hydraulic c-frame presses are valued for their high efficiency and versatility. Our wide range of equipment is also systematically geared to the requirements of our customers.
All c-frame presses can be operated in both manual and automatic mode. Moreover, they can be readily configured as assembly, drawing, high-speed, straightening presses or broaching machines.
|
|
The hydraulic machines with column have the advantage of becoming deformed very little; the deformation is primarily axial. They preserve, under effort, a parallelism of the tables higher and lower.
Like the machines with arcade, they are particularly suitable for the operations of loading by before and unloading by the back.
In options, we can equip them:
of a guided slide
of a greenhouse blank
of a mobile shutter of protection
etc...
|
|
presses hydraulics
Presses of 250 kN or 1000 kN flexible cutting of product with a slide guided on the columns.
|
|
4 Column
Un-restrictive access to the working area
Easiness for handling
Especially convenient for different big sizes of dies
Excellent guiding
- RHKP 400
- 4.000 kN pressing capacity
- single action
- CNC-Control-System
- Data-Exchange-System
- press-line-interface-configuration
|
|
|
|
Hydraulic presses
