Linear brakes and rod locks

 
38 Industrial products | 11 Companies
 
 
ACE
Pneumatic opening clamping / braking element for linear guides ACE

ACE Controls now offers a series of products, titled the LOCKED SERIES, specifically designed to lower machine process costs and increase service life as ...

Pneumatic opening clamping / braking element for rotational shaft ACE

ACE's innovative pneumatic clamping elements of the LOCKED SERIES Type R offer the highest forces and holding for clamping of rotational movements directly on the shaft. They ...

Pneumatic opening clamping / braking element for surface contact ACE

The extension unit LOCKED SERIES Type L from ACE enables pneumatic clamping adjacent to the precision rail.
The ACE LOCKED SERIES Type L extension ...

Nexen Group, Inc.
Linear brake for guide rail  Rails 15 - 45, 450 - 2 600 N | RB 45 Nexen Group, Inc.

Profile Rail Brake

Nexen's RB Series of linear profile guide rail brakes uses spring force to secure the load in holding applications. Superior response time and high force for stopping and holding ...

RK Rose+Krieger
Pneumatic opening clamping / braking element for linear guides RK Rose+Krieger

The new version of Machinery Directive 2006/42/EC comes into force on 29.12.2009.
During normal operation of the axis a pressurised pneumatic unit ensures that the locking system is open. Only upon loss of pressure, for ...

Zimmer GmbH
Hydraulic clamping / braking element for linear guides  max. 40000 N, 150 bar | KBHS Zimmer GmbH

Hydraulic heavy load brake:
The Braking and Clamping Element with spring-loaded energy storage KBHS.

The KBHS series is a hydraulically operated heavy load brake featuring spring-loaded energy storage.
This ...

Hydraulic clamping / braking element for linear guides  max. 46000 N, 20 - 150 bar | KB Zimmer GmbH

Hydraulic heavy load brake:
The Braking and Clamping Element with membrane technology KB

The KB series is a hydraulically operated heavy load brake. The hydraulic oil presses the large-surface contact sections, which are equipped with a special brake lining, directly onto the section rail guide via a piston mechanism.
Because of the material combination of the linear guide/contact ...

Hydraulic clamping element for linear guides  max. 46000 N, 20 - 150 bar | KW Zimmer GmbH

Hydraulic super-heavy load clamping:
The Clamping Element with membrane technology KW

The KW series is a hydraulically operated heavy load clamping device.
The hydraulic oil presses the large-surface contact sections directly onto the section rail guide via a piston mechanism.
When used in harsh work environments or with ...

Ortlinghaus
Hydraulic clamping / braking element for linear guides Ortlinghaus

The newcomer in the Ortlinghaus line of products for press drives is our hydraulically actuated form - fit linear motion lock, featuring electronic monitoring. ...

Linear safety brake Ortlinghaus

The Ortlinghaus linear brakes are suitable for use as holding and braking systems for various types of linear drives e.g. linear motors.
- Backflash- free holding of the table at the required position.
- ...

SITEMA
Hydraulic clamping / braking element for linear guides  ø 18 - 110 mm, 7 - 400 kN | KRG SITEMA

Actuation
Safety Locks are held open by hydraulic (100 bar min) or pneumatic (3,5 bar min) mean and clamp when pressure ...

Hydraulic clamping / braking element for linear guides  Lloyds Register Approved SITEMA

SITEMA - Locking Units type KFHL have been developed to satisfy the particular requirements associated with maritime applications. For example, the complete clamping system has been ...

Linear brake: rod lock for pneumatic cylinders/guide rods  ø 16 - 28 mm, 5 - 20 kN | KRGP SITEMA

Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate ...

ERRE.DI. srl
Pneumatic clamping element  FRC ERRE.DI. srl

The tightening is done using an amplification ...

Pneumatic clamping element  FRCDP ERRE.DI. srl

New line created to obtain a high clamping force in small spaces.
For ...

Pneumatic clamping element  FRCSP ERRE.DI. srl

The requirements include using a smaller element, extremely easy to install ...

HEMA Maschinen- und Apparateschutz
Linear safety brake for machine tool and lifting tool  PClamp HEMA Maschinen- und Apparateschutz

Advantages

Pneumatic clamping with high forces
Optimum safety clamping ...

Pneumatic opening clamping / braking element for linear guides  max. 10 000 N | LinClamp S, SK, SA HEMA Maschinen- und Apparateschutz

LinClamp S/SK/SA
LinClamp S rail clamping systems are powerful, fascinate with their simple design, provide compact dimensions, compatible with existing solutions (1:1 replaceable) specially ...

Pneumatic opening clamping / braking element for surface contact  2 200 N | LinClamp A HEMA Maschinen- und Apparateschutz

LincClamp A - a surface clamping system alternative to rail clamping versions allowing an easy and quick (dis)assembly of the units

LinClamp A released: Compressed air is applied to the chamber between the two spring steel diaphragms. This elastically deforms the spring steel sheet and the entire system contracts.This contraction causes the clamping jaw ...

AME
Pneumatically operated rod clamping device  AMLOK® RLN AME

AMLOK® Pneumatic Series RLN Rod Clamp

The RLN power-off pneumatic rod locks are particularly-well suited for holding applications in industries such as automotive, mobile, food, machine tool and military test, among others.

Standard features include ...

HESTEGO
Linear brake for guide rail HESTEGO

Clamping Systems

Pneumatic clamping or brake system of highest power and torque. Fail safe security clamping pneumatic failure means clamping remains effective. The values ...

Univer Group
Linear brake: rod lock for pneumatic cylinders/guide rods Univer Group

A product which combines the familiar and traditional aspect of the UNIVER locking unit and ...

recherche-cat www di En 2012-05-20-18