 |
 |
Vertical tensile testing machine max. 2.5 kN | MultiTest 2.5-i Mecmesin
Mecmesin's premium range computer-controlled tensile test system The MultiTest 2.5-i provides a powerful and comprehensive...
 |
  |
Stainless steel passivation tester PASSI TEST PLUS Nitty Gritty
PASSI TEST PLUS allows to check the real state of passivation on the stainless surface and certify, in accordance with regulations and laboratories standards, the quality of the satinless and of the goods manufactured using it. The instrument consists of two parts: the probe with inside the electrochemical...
 |
 |
Stiffness test set GURLEY Precision Instruments
All Genuine GurleyTM bending resistance/stiffness testers are based on the same physical principle. each instrument consists of a balanced pendulum or pointer which is center-pivoted and can be weighted at three points below its center. The pointer moves freely in both left and right...
 |
 |
Static materials testing machine Multicheck Model 80301 Nex Flow Air Products Corp.
Multicheck Model 80301 -tests if static bars and power supplies are working. Quantitative performance testing. The high-voltage test unit Multicheck Model 80301 is a performance testing unit for HAUG or other power packs and for...
 |
 |
Manual vertical tensile and compression test stand max. 3000 N Hans Schmidt & Co
Max. capacity 500 N Vertical manual test stand with hand wheel for measuring compression and tension forces Rugged design Test stand is available with distance measuring system and extended stroke Special...
 |
 |
Table top materials testing machine max. 100 Hz, ± 22 N Bose - ElectroForce Systems Group
Measuring less than 50.8 cm (20 inches) tall, the ElectroForce® 3100 test instrument is the smallest in the ElectroForce product family. The 3100 will fit on a desk or table-top, and it is extremely...
 |
 |
Abrasion tester Model 5135 / 5155 Taber Industries
The TABER® Rotary Platform Abrasion Tester – Model 5135 or 5155 is commonly referred to as the Taber Abraser (Abrader). This precision built instrument was developed to perform accelerated wear testing and is capable of providing reliable data in a matter of minutes compared to the years that may be required by in-use testing. Used to test a...
 |
 |
Texture analyzer (food testing) 3000 lbs | TMS-2000 Food Technology Corporation
Texture Analyzer - TMS-2000 The TMS-2000 is a research-grade texture profile analysis measurement system comprised of the TP-6...
 |
 |
Vertical tensile testing machine max. 2000 kN Shanghai Hualong Test Instruments
Hualong WAW (single space) series electrohydraulic servo universal testing machine are ideal for high-capacity...
 |
 |
Hydraulic universal materials testing machine 150 kN | Super L Tinius Olsen
The 150kN (30,000 lbf) Super L model features our patented dual pressure hydraulic loading system and a rugged four column construction for exceptional load frame rigidity. The machine has an operating range from 60 lbf to 30,000 lbf and...
 |
 |
The universal testing machine inspekt offers high-class mechanic precision, frame stiffness and modern...
 |
 |
Introduction: WDW Series Computer Control Electronic Universal Testing Machine is used to perform tension, compression, flexure/bending and shearing for specimens. Suitable for metal and nonmetal material, such as iron, steel, steel bar, rebar, rod and so on. Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this UTM can be used to metal, non-metal,...
 |
 |
Universal testing machine (UTM) ADMET
The eXpert 560x series is a bold new approach to low force testing at an affordable price. The rigid frame, top acting detachable actuator, detachable electronics...
 |
 |
Displacement force test stand 5 - 500 N | FMT-310/311 Alluris
Programmable Universal Tester FMT-310/311 Integrated force, displacement and time measurement with touch screen operator control unit Large, deep clearance around sample holder to accommodate large irregularshaped test objects Single or multistep routines are easily stored and recalled for standardized tests RS232 bi-directional...
 |
 |
Control Unit (C.U.), tubings and 3-cells probe to perform in situ Pressuremeter test in soils conform to the ISO 22476-4 and ASTM D-4719-00 Standards....
 |
 |
Horizontal tensile testing machine 177da AJT Equipment
Designed to customer specifications specifically for proof loading and destruction tests that require data logging. Straining Unit Long stroke hydraulic cylinder with double acting ram. Piston head and cylinder...
 |
 |
Adhesion tester PosiTest AT DeFelsko Corporation
Overview: Measures adhesion of coatings to metal, wood, concrete and other rigid substrates Revolutionary self-alignment feature and pull rate indicator. Conforms to national and international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others Pull Rate Indicator allows operator to easily monitor...
 |
 |
Computer controlled force measurement stand 48 V , 120 psi Fideris
Fideris Brand force controler utilizes closed loop PID controller with pneumatic output and feedback provided by transducer. Available with or without...
 |
 |
Universal testing machine (UTM) GALDABINI
Wide range of tooling solutions for tensile, cycle, compression, shearing, and flexure tests in combination with extensometers and other deformation measuring instruments....
 |
  |
Heat seal tester hawo viú-2 hawo GmbH
Test system for monitoring the integrity of seals for flexible packaging through...
 |
 |
Sample cutting machine max. 60 cm | ZM Hoza-Cutter GmbH
Our sample cutting machines are manufactured in a cutting width from 30cm up to 165cm for serrated and 250cm for straight cuts. A manual...
 |
 |
Materials testing machine max. 600 kN | EUROTEST SERIES Ibertest
ELECTROMECHANIC COST EFFECTIVE SERVOCONTROLLED MACHINES - ELECTROTEST SERIES ADVANTAGES Two high precision screw balls and two guided columns, to ensure an optimum load division throughout...
 |
 |
Materials testing machine Ihle
Thanks to our many years of experience and know-how, we are able, as an independent, professional test centre, to make expert quality evaluations on tungsten carbides. Contact us for advice on the selection and use of suitable carbide grades. Our comprehensive laboratory facilities...
 |
 |
Impact test set with high speed video HSV Imatek
The High-Speed Integrated Video option is available for any of the Imatek range of impact testers, to greatly enhance understanding of the behaviour of a specimen as it undergoes an impact. Imatek offer a fully integrated system under the control of the ImpAcqt software. This is used to both control the camera and analyse the resulting...
 |
 |
Friction and wear tester H16 Kett
Used to inspect friction between a rotating surface and sheets, the H16 can be used for textile, film and paper measurement,...
 |
 |
Drop impact tester max. 1300 lb | MAXDROP™ Series L A B Equipment
* Two models: 300KG (660lbs/300kg) & 600KG (1320lbs/600kg) * Drop heights: 36"/900mm for model 600KG, 60"/1500mm...
 |
 |
Dynamic and fatigue test system Link Engineering
Link designs and manufactures both customized and standard test systems to support wheel and bearing component development. Link test equipment provides solutions...
 |
 |
Horizontal pushrod dilatometer L 75 H Linseis
Description The horizontal research Dilatometer series L75H was developed to meet the demands of the research laboratories worldwide including ceramics and steel industry applications. This...
 |
 |
Torque measurement stand 2 - 500 Nm | JRS Opta Crane Electronics ltd.
The Crane Joint Rate Simulator (JRS Opta) is used for assembly tool performance testing. This is achieved by accurate and repetitive simulation...
 |
 |
Wedge grip for tensile testing 1 - 10 kN | G1061 Mark-10
These heavy duty self-tightening grips with a capacity range of 200 lbf to 2000 lbF (1 kN to 10 kN) are ideal for tensile testing of a wide range of materials....
 |
 |
Motorized peel force test stand MDC Engineering, Inc.
Peel Tester Machines SurePeel: The Seal Strength Tester for Medical Device Packaging SurePeel is an automated tester that utilizes a force transducer to measure the seal strength of flexible barrier materials and packaging. SurePeel is an ideal tool for performing ASTM’s F88 Standard Test Method. Seal strength is not only relevant...
 |
 |
Scratch / mar test set Micro Photonics
High precision Scratch Tester, Indentation Tester and Wear Tester modes for determining properties of thin/thick coatings and substrates. The tool covers from Nano, Micro and Macro range for applications such as measuring hardness and elastic...
 |
 |
Water absorption tester IPT Institut für Prüftechnik Gerätebau GmbH & Co. KG
-Easy handling and safe usage -Professional...
