|
|
| Products 181 to 210 of 271 |
saia rotary stepper motor
Dimensions (mm) from Ø 13x36
Step angle (°) 18
Holding torque (mNm) 2.0
Detent torque (mNm) 0.3
Winding bipolar |
|
6000 Series
Step motors are high-torque drives with a high degree of positioning accuracy. Thanks to their high drive shaft performance beginning at quite low revolution counts, high retaining torque on stopping and the fine step resolution, the step motors are a precise and compact form of direct drive. Because of their brush-less design they also require no maintenance and so the step motor is the ideal drive element for all applications where a long working life is required even in high-stress working environments. For every situation, the user will find an optimal drive to select from the many available:
Permanent-Magnet Step Motors
Actuators For Instrument Clusters
Hybrid Step Motors
Top-Drive Hybrid Step Motors
Permanent magnet stepping micro-motors |
|
| ElectroCraft TorquePower and TorquePower Plus motor have set the standard for quality, reliability, and durability in stepping motors. With non-cumulative position accuracies as low as ±3%, the precision of our TorquePower motor is matched only by the dependability of its performance. Our TorquePower motors are also bi-directional and totally enclosed with permanently lubricated ball bearings for long-lasting, smooth operation. |
|
Ordinary motors cannot operate for long at pressures lower than 10-4 Torr. Empire Magnetics vacuum rated motors are constructed to allow extended operation at pressures as low as 10-7 Torr without a sacrifice in motor performance.
Some vacuum applications cannot tolerate contamination by motor outgassing products. To accommodate a range of motor cleanness requirements, Empire Magnetics provides three grades of vacuum rated stepping motors in the full range of environmental motor sizes.
Frame size selection:
Motors are typically made in groups or families, the families are identified by the outer diameter or size of the square, these references are called frame sizes. In the American system, a 23 frame is a nominal 2.3 inches in diameter. For motors less than one inch in diameter, the reference is typically known as a size. Herein is a list of the frame sizes offered by Empire Magnetics Inc. and some of the characteristics of the group that will allow you to select from them. |
|
Extremely high speed performance unlike other standard stepper types
Extremely low current consumption
Extremely light and compact
Digital control for simple system integration
Smooth and accurate speed control
High/low temperature operation
Operation in a vacuum
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
1 and 2 phase stepper motors available
|
|
- 2-phase DC stepper motors, torque range 0.24 to 1.6 Nm
- Step angle: 1.8°
- Rated supply voltage: 24 ... 60 V
- appropriate stepper motor amplifier: ECOSTEP54 for 4 motors
- Microstep control (12.800 microsteps) for a high positioning accuracy and a
smooth motor running
- Switching from sine to rectangular commutation depending on the speed
- 8 isolated digital inputs and outputs
- Parameterization via CANopen or RS232 |
|
| NMB Corporation offers a broad range of standard and custom designed stepping motors for OEM users. NMB provides complete in house volume production capabilities, including the internal production of miniature precision bearings, die coating, lamination stamping and injection molding in addition to one of the largest tool and die centers in the industry. These resources are available for standard, custom and value-added step motor designs for our OEM customers. |
|
2 phase types
Standard type: mounting size 42mm - 85mm, max. holding torque up to 9.3Nm, basic step angle 1.8°.
High Resolution type: mounting size 42mm - 56mm, max. holding torque up to 1.35Nm, basic step angle 0.9°.
Gearhead type: mounting size 28mm - 90mm, max. holding torque up to 12Nm, basic step angle 1.8°.
P-type: mounting size 28mm - 42mm, max. holding torque up to 0.93Nm, basic step angle 1.8°.
J-type: mounting size 60mm, max. holding torque up to 3.1Nm, basic step angle 1.8°.
5 phase types
Mounting size: 42mm - 85mm
Max. permissible torque: up to 6.3Nm
Basic step angle: 0.72°
|
|
Gemini GT Microstepping Drive
Provides two power ranges for up to 8 Amps of continuous current
Step and direction (cw/ccw)mode
Active Damping%u2122, Electronic Viscosity%u2122, and ABS Damping%u2122
Encoderless stall detect
Simplified configuration
Short curcuit protection - phase-to-phase and phase-to-ground
OEMZL Microstepping Drive
4 Amp or 6 Amp @ 120 VAC (170 VDC bus voltage)
Standard step-and-direction input or CW/CCW input
Operates with standard 1.8" hybrid step motors
Anti-resonance eliminates mid-range instability and provides damping ratios of up to 0.2
CE marked for LVD compliance
UL recognized
E-AC and E-DC Microstepping Drives
AC: Designed for use with motor inductance of 0.5 mH - 80 mH AC / 0.2 mH-80 mH DC
3-state current control allows the drive and motor to run cooler and more efficiently than 2-state drives
Selectable resolution up to 50,800 steps/rev
Auto standby reduces motor current (and heating) at rest
Provides 0.02 Amps to 3.5 Amps (peak) AC / 0.2 Amps to 4.8 Amps (peak) DC
95 - 132VAC power supply input / Single 24-48 VDC power supply input
AC: 4 (AC) / 6 (DC) predefined current waveforms to optimize smoothness
LV and HV Step Motors
High Performance
Cost Effective
Optimized for both low-voltage and high-voltage applications
Five frame sizes from 11 through 34 |
|
| Stepper motors with integrated ministep bipolar chopper drives. They are offered in four versions, featuring programmable motion controller and FIELDBUS interface as well as standard opto-insulated STEP and DIRECTION inputs. |
|
Mounting size : 28mm to 106mm
Step Angle : 0,9° and 1,8°
Holding torque : 0,032Nm to 19Nm
Option / customization : encoder, damper, cabling, brake, gear box, vacuum, integrated driver
UL and EN compliant
|
|
PLEASE USE ENGLISH FOR ALL ENQUIRIES.
Enquiries written in other languages will not be answered. |
|
When selecting your motor there are many parameters to consider including voltage and current available from your drive, speed, resolution, space and cost. The following notes may assist you in your selection of a suitable package:
For an application requiring a speed of less than 5rpm and torque of greater than 1Nm we suggest you consider a permanent magnet stepping motor fitted onto a gearbox. Where a speed of less than 5rpm and torque of less than 1Nm is required you can consider either a permanent magnet or hybrid stepping motor without a gearbox. |
|
| Zaber's T-NM products are computer controlled NEMA size 17 motors with 0.028 degree resolution. They are stand alone units requiring only a standard 15V power supply. Multiple units can be daisy-chained to a single RS-232 serial port or USB port (using an adapter) on any computer. They can also be daisy-chained with any other T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extension can be used. |
|
Mounting sizes: 28mm - 60mm
Maximum permissible torque: up to 1Nm
Power supply: 24V DC
Taper hobbed gear-type: permissible torque 0.2Nm - 4Nm, backlash 0.167° - 1°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear-type: permissible torque 0.2Nm - 8Nm, backlash 0.034° - 0.05°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear-type: permissible torque 1.5Nm - 8Nm, 2 gear ratios of 1:50 and 1:100.
Marking: CE, UL and cUL |
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 4Nm
Power supply: 100 - 115V AC or 200 - 230V AC
Marking: CE, UL and cUL
With microstep driver.
Also available with electromagnetic brake.
Additionally with integrated controller.
Geared type
Mounting size: 60mm-90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 1.25Nm - 12Nm, backlash 0.167° - 0.584°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 100-115V AC or 200-230V AC
Marking: CE, UL and cUL
Also available with electromagnetic brake.
Additionally with integrated controller. |
|
AC SERVO SYSTEM QH
Features :
Single-axis positioning and speed control
Define motion programs up to 512 steps, 100 positions & 16 torque values
12 digital inputs, 8 digital outputs and 2 analog inputs
Easy programming with Windows© set-up software
UL/CE, IP67 motors
Motor sizes : from 40mm² to 76mm²
1. Programmable indexer offers both single-axis positioning and speed control
2. Define motion profiles with up to 512 program steps, 100 unique positions,16 speeds, & 16 torque values
3. 12 input points, 8 output points, and 2 analog inputs
4. Easy program creation and debugging with Windows® setup software
5. UL & cUL listed, CE approved, Q1 motors are rated to IP67
Rated power : 100W, 200W, 400W and 750W
Input power supply
single or three phase 230 VAC
|
|
2-phase types
Mounting size: 42mm - 56mm
Standard type: max. permissible torque up to 1.35Nm, Full-/Halfstep driver (1.8°/0.9° resolution).
High Resolution type: max. permissible torque up to 1.35Nm, Full-/Halfstep driver (0.9°/0.45° resolution).
Gearhead type: max. permissible torque up to 4Nm, permissible torque 0.2Nm - 4Nm, 6 gear ratios of 1:3 - 1:36.
Power supply: 24V DC or 36V DC
5-phase types
Mounting size: 42mm-85mm
Max. permissible torque: up to 6.3Nm
Power supply: 24V DC
Gearheads: 4 gear ratios of 1:7.2 - 1:30
Marking: CE, UL and cUL
Full-/Halfstep driver (0.72°/0.36° resolution).
Low vibration and low noise.
Input for pulse, direction, step angle, automatic current cutback release input.
Excitation timing and overheat output (only for 2.8A version).
Run currents and stop currents are set up by potentiometer. |
|
the 2-Phase-Step Motors SECM24..., SECM26... and ECM26... Series and the 5-Phase-Step Motors SECM56... and SECM59... Series are available with Encoder. The Specification of the Encoder is as follows:
2-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 200 Counts/Revolution
5-Phase-Step-Motor:
Output-Signal: TTL or Line-Drive, 500 Counts/Revolution |
|
Standard type
Mounting size: 60mm - 85mm
Max. permissible torque: up to 6.3Nm
Power supply: 200 - 230V AC
Marking: CE, UL and cUL
Microstep driver.
Also available with electromagnetic brake.
Low noise and low vibration.
Driver with vibration control circuit to dramatically reduce vibration over the whole speed range.
Energy-saving mode (only with electromagnetic brake).
Geared type
Mounting size: 60mm - 90mm
Taper hobbed gear: max. holding torque up to 12Nm, permissible torque 0.35Nm - 12Nm, backlash 0.167° - 0.75°, 5 gear ratios of 1:3.6 - 1:30.
Planetary gear: max. holding torque up to 37Nm, permissible torque 0.8Nm - 37Nm, backlash 0.034° - 0.58°, 6 gear ratios of 1:5 - 1:50.
Harmonic gear: max. holding torque up to 37Nm, permissible torque 3.5Nm - 37Nm, 2 gear ratios of 1:50 and 1:100.
Power supply: 200 - 230V AC
Marking: CE, UL and cUL |
|
For water supply from tanks, basins or tubs and from open
wells (large wells) or from 6" wells for residential, civil or
agricultural use and for pressurizing water in general.
Structural specifications
Outer jacket: made entirely from AISI 304 stainless steel,
including delivery casing with 1 1/4" G threaded outlet.
Impellers and diffusers: hardwearing, thermoplastic resin.
Diffusers fitted with self-adjustable wear rings.
Enbloc pump and motor shaft made entirely from AISI 431
stainless steel, supported at three points.
Permanently pre-lubricated bearings.
Seals: two mechanical seals: Graphite/alumina oxide seal
on motor side; alumina oxide/silicon carbide seal on pump
side. Interposed oil chamber (FDA-approved, non-toxic oil).
Protection class: IP68 |
|
| These low-pole AC servo motors of the ECOSPEED series stand out due to extremely low torque ripple at low speed. Torque from 1 - 26 Nm. Flange dimensions 60 mm, 80 mm, 110 mm, 130 mm. Rated speed depending on series between 1500 and 5000 rpm. Available with incremental encoder or absolute value encoder. Holding brakes from 0.5 - 10 Nm (optional). Certified version according to ATEX directive 94/9/EG for use in hazardous locations. Also available as hollow-shaft built-in motor. Approvals: UL/CSA, CE. |
|
| Our AC synchronous servomotors have a very high power density and enable highly dynamic positioning drives with an excellent price/performance ratio. For maximum flexibility, the servomotors are compatible with the standard servo connection dimensions. The AC synchronous servomotors are equipped with an absolute sensor system: SinCos® Singleturn (SRS, SKS) or SinCos® Multiturn (SRM, SKM). The encoder system with the Hiperface® interface enables auto-initialisation of the motor and current controller parameters. This greatly simplifies the commissioning procedure of the drive system. |
|
Meeting stringent requirements in terms of response, precision and excellent power-to-size ratio.
The motor sizes have been carefully graded and offer rated torques from 0.8 to 64 Nm (0.25 to 10.0 kW) and peak torques of up to 191 Nm. As a result, finding the optimum motor for any drive task is easy. |
|
|
|
Synchronous electric motors: Brushless, Stepper motors, Servo-motors
