|
|
-Maximum torque in small, compact packages
-Four-pole rotor minimizes cogging
-Neodymium iron boron magnets deliver high power
-High speed designs to 100,000 RPM
-Smooth operation at even high speed through precision balancing
-Double-shielded stainless steel ball bearings ensure long life
-Hall sensor feedback for smooth commutation and efficient variable
speed control
-Standard windings available for quick shipment of prototype and
production motors
Design Features
-Sizes 5, 8, 10, and 14
-3 phase slotted stator
-4-pole rotor featuring neodymium iron boron magnets
-High temperature Hall-effect sensors
-Precision double-shielded stainless-steel ball bearings
-Precision balanced rotors with speeds to 100,000 RPM
Options
-Multiple standard windings; custom windings upon request
-Custom shafts
-Customer specified connectors
-Optical encoders
-Electromechanical brakes
-Autoclaveable versions available in production quantities
-Gearhead options available in production quantities |
|
Voltage: 230 V (Supply Voltage Electronic Controller)
Frequency: 50 or 60 Hz
Power: 60 - 500 Watt
Speed: 1300, 2000, 3000 min-1
Other speeds on request
Type of protection: IP 54 |
|
| The 26BC6A features an integrated electronic commutation with a 6 wire lead. The 26BC6A features a no-load speed between 5600 and 14000 rpm. The power of the 26BC6A is rated at 14 Watts at 10 krpm. |
|
The SL-EC Series brushless disk motors have a flat construction, are maintenance-free, and are available with a wide range of rated voltages.
The rotor, which is equipped with magnets, can be operated as a direct drive that is sealed off from the surrounding environment. This makes them ideal for compact and robust customer-specific solutions. |
|
Motors in the BG range are electronically-
commutated direct current
motors (EC motors) with integrated
Hall sensors for rotor-position recognition.
Besides ball bearings, these
motors have no parts that are subject
to wear, and are thus especially suitable
for continuous operation. Their high
power density and compact form,
combined with a favourable
price/performance ratio make these
motors suitable for numerous applications. |
|
Direct drive BRUSHLESS DC motors
Ø 42 mm 14 to 31 Watts
30 Watts
80 Watts
|
|
Empire Magnetics' family of vacuum rated motor/resolvers bundled with a drive system are ideal for efficient closed loop motion control applications. Empire Magnetics' brushless motor with a resolver form a single rugged component suitable for hostile enviromnents. Drive electronics can be removed and controlled from a more hospitable location via RS-232.
Motor Features:
These motors can accomodate rapid acceleration and deceleration. The brushless construction is made for reliability. The brushless resolver can be used as the feedback device. There is high torque to inertial ratio and stall torques from 14 to 451 lb-ins. The unique structure allows maximum power ratings, anti cog design and long life bearings. |
|
Highly dynamic and compact, reliable and scalable, with high overload capacity.
We have risen to the challenge and offer a comprehensive range of motors:
– Servo motors for highly dynamic applications
– Standard asynchronous motors as general purpose motors with many options
– DC motors with extremely smooth running characteristics at low speeds
Servo motors
Three-phase AC motors
DC motors
|
|
MPP SERIES Motors
Sizes 92, 100, 115, 142, 190, 230, and 270mm
12 to 1295 in-lbs continuous torque
High torque density packaging
Segmented Lamination Design
Brushless Construction
High performance Neodymium magnets
Thermistor Protection
2000 line incremental, Resolver, Single/Multi-turn Absolute, and Serial - "Q" Encoder feedback.
Right Angle "Rotateable" connections
3 - 21 day delivery
Full Customizations available
CE / UL Compliant
|
|
As part of the wide range of AC servomotors proposed by Sanyo Denki, we have identified a series of models, carefully selected from among the most interesting for the Motion Control market, that can be coupled with RS1 drives.
The main characteristics of the motors are listed below:
P2, P3 and Q1 Series Motors: very compact, low inertia. Ideal for applications involving quick acceleration and fast positioning.
P5, P6 and Q2 Series Motors: compact, medium inertia. Ideal for applications in which the load inertia exceeds the motor inertia. Very smooth rotation, even at very low speed.
IP protection degree: IP43 to IP67 (according to the different models).
Power range: 50W to 3000W.
Maximum speed: 4500 rpm (3000 rpm for P5 1kW e P6 1.5kW).
Position sensor: incremental encoder on all models (A, -A, B, -B, C, -C). The real system resolution available is equivalent to 8000 step/rev.
Perfect behavior in overload conditions. E.g.: a torque equal to 200% of the nominal torque can be maintained for 10 to 20 sec. (according to the different models).
Proper management of any loads characterized by a level of inertia that far exceeds the motor inertia.
A complete map of all of the motor’s electrical features is stored in the R drives.
S |
|
STALL TORQUE:
0.15 to 75 Nm
POLARITY:
4, 6, 8, 10 poles
RATED SPEED:
1200 - 2000 - 3000 - 4000 - 6000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
CE certification
cURus certification
OPTIONS:
low inertia motors - high working speed and high acceleration
compact motors - high torque density with respect to their volume
forced ventilation (from size 63 to 100) |
|
The 6100 Series is offered in seven sizes (motor frame size), three designs (for Boring, Milling and Grinding applications), and a large variety of horsepower and speed combinations. Models are available with non-ventilated, ventilated, and liquid cooled models for high-power and/or /severe operating conditions exist. The 6100 motorized spindle is a workhorse spindle and will deliver years of trouble-free performance.
Standard 6100 Series Features:
100% Inch Spindle Design
Foot Mounted Design
Super Precision Class 7 Angular Contact Steel Ball Bearings
Permanent Grease Lubricated
Rubbing or Labyrinth Spindle Seal - Speed Dependant
Enveloping Shroud - Front and Rear
Dynamically Balanced to 1.0 micron Vibration Displacement
Controlled Reference Edge- Block Style Housing
230/460V-3Ph-60Hz Electrics (special voltages sold as options)
Tool Nose Arrangements:
Milling Spindles- NMTB Nose and Hole Thru Arbor
- Except Size 5 Includes an Integral Collet Chuck Nose
- Boring Spindles are Drilled to Customer Specifications
- Grinding Spindles- GT External Taper Nose
SETCO's Goldline TCT Certificate Spindle Registration
Standard 1-year Warranty
|
|
| The SGMPH servomotor series has a medium inertia design with a flat profile providing the highest torque-per-length ratio available. These servomotors are well suited for applications requiring optimized load matching. There are five frame sizes providing up to 2,027 oz-in of peak torque. 100 and 200 volt windings are available with rated speeds of 3,000 rpm and maximum speeds of 5,000 rpm. An 8,192 ppr incremental serial encoder is standard. The SGMPH is rated IP67 (not including the shaft) providing resistance to moisture. Options include a 65,536 ppr absolute encoder, gearmotor, shaft seal, and holding brake. |
|
Torque motors produce a high torque which acts proportionally with the current and remains practically constant over the whole of the engine's axis of rotation. With torque of up to 480mNm and angles of rotation of 80°, these are eminently suitable for adjustment tasks such as those effected by throttle valves, AGR valves, or variable turbine configurations in exhaust gas turbochargers. Their contact-free function and the option of installing position sensors gives the user a motive power solution with the assurance of all-round availability and safety.
The products of the series 4000 are at present only available for OEM applications. |
|
| Motors are typically made in groups or families, the families are identified by the outer diameter or size of the square, these references are called frame sizes. In the American system, a 23 frame is a nominal 2.3 inches in diameter. For motors less than one inch in diameter, the reference is typically known as a size. Herein is a list of the frame sizes offered by Empire Magnetics Inc. and some of the characteristics of the group that will allow you to select from them. |
|
Micropump patented electromagnetic drives use rare earth magnets to increase motor torque capabilities while reducing total pump/drive package size. Surface mount technology improves reliability and enables higher efficiency motor performance. Variable speed electronic controllers offer thermal and overload protection with the option of a 0-5 VDC input signal, a 4-20 mA current loop, or a manually controlled drive. Closed-loop speed control allows for quick and easy setting of speed.
Performance Summary
- Speed range 500 to 6000 rpm
- Torque @3500 rpm to 106 mNm
- DC voltage 20 to 30 V
- Power @ nominal V 40 or 70 W
- Current input 1.8 to 3 A max
- DC speed control 0 to 5 V
-Tachometer Output 0 to 5 square |
|
| Canon Precision's brushless motors are compact in size and provide high output power. Two types are offered; an outer rotor type with high rotational stability and an inner rotor type with quick response. Inner rotor types can be equipped with reduction gears and encoders. Various custom options can be incorporated to fit your applications. |
|
X-By-Wire Expertise (XBW)
The automotive industry’s transition to increasingly more sophisticated X-By-Wire applications makes reliable motion control crucial. The continuous push for safer, more fuel-efficient and environmentally friendly vehicles will be achieved by replacing traditional mechanical systems with faster, lighter, intelligent actuators. Globe Motors is helping companies in this transition, by providing XBW solutions in a variety of automotive applications.
|
|
Direct drive Dividing Apparatus TA Sk 50:
Rotational axis for dividing in machine tools or other processing machines. Due to the direct drive implemented in this machine far higher r.p.m. rates can be achieved than as with comparable worm driven devices. Work pieces can thus for instance be treated by cylindrical surface grinding. The drive is absolutely free from any play or float. |
|
STALL TORQUE:
10 to 600 Nm
POLARITY:
12, 24, 30 poles
RATED SPEED:
200 - 300 - 400 - 500 - 1000
INSULATION CLASS:
F
DEGREE OF PROTECTION:
IP65
MOUNTING:
IM B5
MAIN FEATURES:
high torque density and high performance
CE certification
cURus certification
OPTIONS:
feedback by encoder/resolver (Heidenain, Stegmann, Tamagawa)
hollow shaft
frameless
water cooled |
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Extremely light and compact
Smooth and accurate speed, position, and torque control
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Control electronics available for all motor series
Available as linear actuator
Custom systems available from design to production
|
|
The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:
Very long life
High efficiency
Highly dynamic acceleration
Good regulation characteristics
Wide speed range
High power density
Maintenance-free
Robust design
Integral Hall sensors for rotor position
Low moment of inertia
High degree of protection
Winding insulation - Class E or B
Neodymium magnets
These electronically-commutated DC motors can be combined with control electronics, gearboxes, and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
Brushless DC motors
- Ø 6 - 60 mm
- 1.2 - 400 watts
- EC, EC-max, EC-powermax, EC flat
Characteristics
- Neodymium magnets
- Unsurpassed life time
- No abrasion
- Low noise level
- High speeds even at low voltages
- No magnetic cogging
- Good heat dissipation, high overload ability
- Very small electrical time constant and low inductance
- Autoclavable versions available
|
|
The RN-EC Series are direct drive, multipole, brushless DC motors with a single-sided wheel hub mounting. As well as the drive components, the motors include integrated drive and control electronics, and an integrated mechanical holding brake if required.
When arranged in pairs, the motors can communicate with each other and with a control device (e.g. joystick) using a CAN bus, providing a means for executing steering movements for the vehicle. Applications include: goods transport systems, flat bed carts, cargo trolleys, etc. The drive systems are also available with either handgrip or remote control options.
Single motors are also used as battery-powered, independent actuators for providing rotational and pivoting motion.
|
|
Baldor provides industry with the widest range of linear motors, linear stages and controls. Being a leader in linear motor design and manufacturing, Baldor continually develops advanced products and innovations to meet a variety of linear motion applications.
Linear motors provide unique speed and positioning performance advantages. Linear motors provide direct-coupled motion and eliminate mechanical transmission devices.
They offer substantial improvements over applications using ball screws, timing belts, etc. The rugged mechanical design provides accurate motion and precision positioning for hundreds of millions of cycles. Baldor linear motors and stages are used in thousands of successful applications worldwide.
Linear motors provide the following advantages:
- High repeatability - resolution to 0.000004 inch (0.1 microns) - this makes sure all parts produced are accurate and identical
- Highly accurate - to 0.0001 inch/ft (2.5 micron/300 mm) - provides precise machine operation for precision parts
- No backlash - direct drive has no backlash such as with lead screws, gears, etc. this improves the accuracy of the part or operation
- Faster acceleration - from 1 to over 10 G's - this leads to shortened cycle times and improved productivity.
- Higher velocities - speeds to over 300 inches/second (8 meters/sec) - to position the payload faster |
|
|
|
Synchronous electric motors: AC Motors, DC Motors, Brushless
