{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Frequency: 1 kHz
... Product overview
G-Link-200 is a wireless 3-axis
accelerometer rated IP67 for reliable operation in dusty, wet or outdoor industrial environments. It is designed for impact, motion, dynamic vibration and tilt monitoring and ...
Hottinger Brüel & Kjær A/S
Frequency: 1 kHz
... Product overview
G-Link-200-OEM is a compact wireless 3-axis
accelerometer designed for OEM integration. It provides synchronized sensing for vibration, impact, motion and tilt with ultra-low-noise data suitable for embedded ...
Hottinger Brüel & Kjær A/S
Acceleration range: 5,000 m/s²
Frequency: 0.1 Hz - 10,000 Hz
... Triaxial Piezoelectric Charge Accelerometer designed for general purpose vibration measurements on larger structures. Type 4321 is a triaxial, piezoelectric, DeltaShear®, Unigain‚ accelerometer with three independent ...
Hottinger Brüel & Kjær A/S
Frequency: 0 Hz - 16,000 Hz
... Systems for vibration monitoring and diagnostics – accelerometers Accelerometers of the VSA series are used for accurate vibration measurement. They measure the rms value of the acceleration on non-rotating component ...
Acceleration range: -20 m/s² - 20 m/s²
Frequency: 0 Hz - 100 Hz
... Acceleration sensors reliably monitor acceleration of parts in plants or machinery. Due to the two-piece mounting concept, F99 series acceleration sensors from Pepperl+Fuchs are extremely robust and also suited for harsh ...
Acceleration range: -981 m/s² - 981 m/s²
Frequency: 0.3 Hz - 8,000 Hz
... KiVibe Miniature triaxial IEPE accelerometer, PiezoStar crystal, 100 g
KISTLER
Frequency: 3,200 Hz
... The ADXL314 is a ±200 g range, 13-bit resolution, 3-axis digital accelerometer. The digital output data is formatted as 16-bit, twos complement data and is accessible through a serial peripheral interface (SPI), 3-wire or 4-wire, or an ...
Acceleration range: 785 m/s²
Frequency: 15 Hz - 10,000 Hz
... The 330450 High Temperature Acceleration System (HTAS) segregates the sensing element from signal conditioning electronics with the two permanently connected via hardline cable. Withstands high heat Sensing head can be installed on surfaces up to ...
Condition Monitoring and Protection
Acceleration range: -490 m/s² - 490 m/s²
Frequency: 0.5 Hz - 10,000 Hz
... Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²)) Broadband Resolution: 0.00015 g rms (0.0015 m/s² rms) Sensing Element: Ceramic Weight: 0.20 oz (5.8 gm) Specification Notes [1] Zero-based, least-squares, straight line method. [2] Typical. [3] Transverse ...
PCB Piezotronics GmbH
... Parker's ACC series is a family of inertial sensors for mobile and other applications. The sensors are analog output and have an inertial range of up to ±1.5G. Two versions are offered to that can be used to indicate acceleration or level position. The ...
... The NEW Ruby MEMS accelerometers represent the next generation of high-performance inertial sensors from Jewell Instruments. With an improved Price-Performance, the new Ruby inertial sensors offer improved resolution, faster frequency ...
Jewell Instruments
Frequency: 3.9 Hz - 125 Hz
... Product Overview
The Ruby MEMS digital
accelerometers from Jewell Instruments are high-performance inertial sensors delivering strong resolution, frequency response and bandwidth in an IP67 package that uses the same mounting ...
Jewell Instruments
Frequency: 200 Hz
... The ASB Series is an angular accelerometer developed by Jewell Instruments. It is mainly used for mechanical, business and sensing applications. This unit is built with protection rating of IP 65. It features a 200 Hz maximum bandwidths, ...
Jewell Instruments
Acceleration range: -4,903 m/s² - 4,903 m/s²
Frequency: 0 Hz - 15,000 Hz
... Overview
- Triaxial piezoresistive accelerometer based on MEMS technology with four variable resistors configured as a Wheatstone bridge.
- Designed as a miniaturized triaxial sensor for crash tests where minimal
ASC
Acceleration range: -19,613 m/s² - 19,613 m/s²
Frequency: 0 Hz - 5,000 Hz
... Product overview
The FUTURESES H201 is a miniaturized uniaxial analog
accelerometer designed for high-impact and shock measurements. Its lightweight construction minimizes mass loading on test structures while providing a wide ...
ASC
Acceleration range: -58,840 m/s² - 58,840 m/s²
Frequency: 0 Hz - 7,000 Hz
... Product overview
The FUTURESES H64M is a miniature uniaxial piezoresistive (MEMS)
accelerometer with a voltage output, developed for crash and high-impact tests where minimal mass loading and a wide frequency range are required. ...
ASC
Acceleration range: 0 m/s² - 400 m/s²
Frequency: 10 Hz - 10,000 Hz
... function / Peak value measurement / Handheld device for mobile vibration measurement / Automatic ISO 10816-3 evaluation The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration ...
... The Polytec VibroOne® laser Doppler vibrometer is the one-box solution for non-contact vibration measurement. With VibroOne® you analyze acoustics, dynamics and vibration issues in both R&D and industrial quality control with laser precision. VibroOne® ...
The SDT270 Acceleration Interface is ideally designed with a good quality functionality and performance intended to be used for specific purposes. The system is capable of measuring, alarming and performing vibration data analysis in several applications. ...
Frequency: 0.5 Hz - 5,000 Hz
... Advanced vibration measurement on 3 axes (X, Y, Z) and machine efficiency for protection and condition monitoring CUBE collects and analyzes real-time vibration data, helping shift from reactive to predictive maintenance strategies, reducing unplanned ...
... Piezoelectric Vibration sensors TA series accelerometer transducers The Vibration sensors TA Series seismically measure absolute machine vibrations by directly fastening the vibrating part on the supports. They provide an output signal ...
Frequency: 0.1 Hz - 10,000 Hz
... Piezoelectric acceleration sensor Piezoelectric acceleration sensor for absolute vibration monitoring. Small dimensions acceleration sensor particularly suitable for application on electro-spindles ...
... We offer two 3-directional low frequency accelerometers CHB 1110 (6g) or CHB 1126 (16g) for seismic and structural monitoring of vibrations in machinery or buildings. CHB 1110 and CHB 1126 have a M12 8-pole connector and are suitable ...
PCH Engineering A/S
In addition to the internal sensors the PCH 1026 can also be connected to both one, two and three directional external sensors like the CHB 1102/17 and the CHB 1101. When using these options, the monitor will be able to monitor tasks like nacelle differential ...
PCH Engineering A/S
In addition to the internal sensors the PCH 1026 can also be connected to both one, two and three directional external sensors like the CHB 1102/17 and the CHB 1101. When using these options, the monitor will be able to monitor tasks like nacelle differential ...
PCH Engineering A/S
Acceleration range: -78 m/s² - 78 m/s²
Frequency: 0 Hz - 0 Hz
... Short description
The TriACCxU8 is a compact triaxial MEMS
accelerometer in a stainless-steel housing, intended for acceleration measurement in industrial and railway applications. Standard measurement range is ±8 g; alternative ...
Micro-Hybrid Electronic GmbH
Acceleration range: -392 m/s² - 392 m/s²
...
The TriACCxU40 is a triaxial
accelerometer with voltage output and a ±40 g measurement range, designed for industrial and railway applications.
Key facts
- Triaxial MEMS accelerometer in
Micro-Hybrid Electronic GmbH
Acceleration range: -39 m/s² - 39 m/s²
... Short description
Triaxial MEMS
acceleration sensor with voltage output, measuring range ±4 g, stainless steel housing, dimensions 20 × 27 × 27 mm. Optional 4-20 mA current output and IP67 cable version. Type-tested to DIN EN ...
Micro-Hybrid Electronic GmbH
... Contact Form/Style: Normally Open Switching Voltage: 24Vdc Max. Switching Current: 0.25A Max. Switching Capacity: 3VA Max. Activation Level: 3.0-9.0G Contact Resistance: 20 Ohms Max. Size: Over All Length: 0.730in (18.5mm) Diameter: 0.190in (4.7mm) Electrode ...
The Comus Group
Acceleration range: 98 m/s² - 146 m/s²
The ASLS -15 acceleration switch is the normally open contact type. Its contact displays a maximum resistance of 10ohms and is activated at levels of 10.0 to 14.9G. It provides a maximum switching capacity of 5VA. Its maximum voltage and current requirements ...
The Comus Group
... Contact Form/Style: Normally Open Switching Voltage: 24Vdc Max. Switching Current: 0.25A Max. Switching Capacity: 5VA Max. Activation Level: 10.0-14.9G Contact Resistance: 10 Ohms Max. Size: Over All Length: 0.709in (18.0mm) Diameter: 0.181in (4.6mm) Electrode ...
The Comus Group
... Combining our accelerometers into a new 3-axis inertial box, used by the worlds leading WRC, F1 and WEC teams. Possible configurations are as follows: - 3 x gas accelerometers. - 2 x capacitive accelerometers, ...
TEXYS
Acceleration range: -196 m/s² - 196 m/s²
Frequency: 1,000 Hz
... lightweight class-leading 3 axis accelerometer. Temperature compensation to 80°C allows our customers an easy installation even in severe conditions. Product Description Compact and lightweight class-leading 3 axis accelerometer. ...
TEXYS
Acceleration range: -490 m/s² - 490 m/s²
Frequency: 1 kHz
... Compact and lightweight class-leading 2 axis accelerometer with a modular design allowing integration with other single or twin axis accelerometers and gyroscopes. Temperature compensation to 80°C allows our customers ...
TEXYS
Acceleration range: -392 m/s² - 392 m/s²
Frequency: 10 Hz - 2,000 Hz
... Product introduction
The GKM3 is a triaxial MEMS digital vibration (
accelerometer) sensor designed for vibration and shock testing, multi‑point synchronous measurement and centralized data acquisition. It provides ...
... Discover a new vibration analysis experience unique in the world. The VSHOOTER®+-3-WL is the ideal equipment for predictive maintenance of rotating machines. This is a vibration analyzer that works with a wireless triaxial sensor then a rugged smartphone ...
Acceleration range: -392 m/s² - 392 m/s²
Frequency: 1 Hz - 1,000 Hz
... br>VibeSense Tri-axial is a wireless, rechargeable tri-axial accelerometer designed for condition monitoring of rotating and industrial machinery. It integrates a MEMS tri-axial accelerometer with an onboard processor ...
Acceleration range: 20 m/s² - 98 m/s²
Frequency: 0 Hz - 800 Hz
... Available in four versions (measurement range: ±2g or ±10g, mounting process: screw or magnetic), the BeanDevice® 2.4GHz AX-3D XRange is a wireless vibration sensor with built-in data logger. Characterized by a waterproof (IP67/Nema 6) and a lightweight ...
BeanAir GmbH
Acceleration range: 12 m/s²
Frequency: 10 Hz
... The BeanDevice® 2.4GHzAX-3D SR is a high-performance wireless vibration sensor with a scalable measuring range (±1.2G and ±2.4G with automatic range adjustment depending on the application). It offers a high level of precision (±0.7mg for ±1.2G range, ...
BeanAir GmbH
Acceleration range: 20 m/s² - 99 m/s²
Frequency: 100 Hz
... well as a tiny radome Omni antenna enabling a maximum wireless range of 200 meters (L.O.S.), this outstanding ULP WIFI accelerometer is dedicated to Structural Health Monitoring, Condition Monitoring and many kind of industrial monitoring ...
BeanAir GmbH
... 1D ACCELEROMETER SENSOR FOR SEISMIC MONITORING 1 V/G Description Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection ...
... 3D ACCELEROMETER SENSOR FOR SEISMIC MONITORING 1 V/G Description 3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate ...
Acceleration range: 490 m/s²
Frequency: 0.5 Hz - 10,000 Hz
... MONO-AXIAL ACCELEROMETER FOR RESONANCE FREQUENCY TEST Used for determining the Longitudinal, Transverse (Flexural) and Torsional resonant frequency of concrete and natural stone samples. The reasonant frequency allows the determination ...
The overspeed control sensor CRT30A type is presented an M30 threaded metal sensor with inductive detection with intervention distances between 4 and 6 mm on metallic material. It is used to control the speed acceleration (overspeed) of a rotary or linear ...
Acceleration range: 20 m/s² - 4,900 m/s²
Frequency: 0 Hz - 40,000 Hz
... Industrial accelerometers The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and ...
Micromega Dynamics
Acceleration range: 20 m/s² - 59 m/s²
Frequency: 0 Hz - 1,000 Hz
... The RECOVIB® industrial mems accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers ...
Micromega Dynamics
Acceleration range: 20 m/s² - 59 m/s²
Frequency: 0 Hz - 1,000 Hz
... The RECOVIB® industrial mems accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers ...
Micromega Dynamics
Acceleration range: 490 m/s²
Frequency: 0.5 kHz - 10 kHz
... The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications. The TA095 can be used with any suitable device that provides a constant-current IEPE power source, such as the TA487 IEPE Signal ...
Frequency: 0 Hz - 2,700 Hz
... • Measuring range for axis X and Y • Resolution 0,244 g/LSB • Digital configuration • Strong, precise and inexpensive Series ES270 transducers have a built-in monocrystalline silicium MEMS sensor for measuring inclination (with absolute vertical ...
Acceleration range: 19 m/s² - 49 m/s²
Frequency: 0 Hz - 700 Hz
... AMS MEMS seismic accelerometer with high sensitivity suitable for any environmental condition and designed for the measurement and study of low intensity accelerations in the range 0-700Hz. AMS models are high-sensitivity sensors designed ...
SOLGEO SRL
Acceleration range: 39,240 m/s²
Frequency: 3 Hz - 54,000 Hz
... Meggitt Sensing Systems presents Endevco® model 22 Picomin™. It is the most compact piezoelectric accelerometer in the world. It has been developed specially for measuring vibration on small items like circuit boards, scaled models, and ...
Endevco
Frequency: 0 Hz - 5,000 Hz
... DTS LIVE WEBINAR – NEW! Linear Accelerometer Technology from DTS Join DTS for the debut of the A64C — a new linear accelerometer in a rugged, industry-standard enclosure, originally developed for use in ATDs. The A64C ...
Frequency: 0.8 Hz - 16,000 Hz
... Sensors available in our range are of the accelerometer type. This means that the measured signal is proportional to the acceleration. Thus, it can be converted into a speed or position signal using an electronic component of the integrator ...
I-care Group
... An accelerometer measures the linear acceleration to the direction of one or more sensitive axes. TLP210 is the new family of tri-axial acceleration sensors, based on the MEMS technology, capable of working in extreme conditions and ...
Acceleration range: 245 m/s²
Frequency: 1 Hz - 12,500 Hz
... high-performance piezoelectric accelerometer designed for ultra-low power consumption and easy integration into wireless vibration sensors and other battery-powered applications. The LVEP050-TO5 embedded accelerometer ...
Wilcoxon Sensing Technologies
Frequency: 1.5 Hz - 15,000 Hz
... Type: -24 Vdc Sensitivity: 100 mV/g Frequency range:1,5 Hz … 15 kHz (± 3 dB) Min. Temp:-50°C Max. Temp:+125°C Hazardous area approval:yes Accessory/ connection cable type: AC-1112, AC-162, AC-163 Accessory/ mounting equipment: AC-274: Sensor ...
Brüel & Kjær Vibro
Acceleration range: 1,961 m/s²
Frequency: 10 kHz
... The G-Link2™ -LXRS® Wireless Accelerometer Node features on-board triaxial or external single axis ±1 g to ±200 g MEMS accelerometers in a small, IP67 rated enclosure. The 16-bit G-Link2 streamlines vibration/acceleration ...
MicroStrain
... and associated them to the digital signal compensation and processing stage to obtain an accelerometer that matches the key performances of servo- accelerometers, at an optimized cost. – Maximum non linearity: <0.05% ...
SENSOREX MEGGITT
Acceleration range: 4,903 m/s²
Frequency: 0.48 Hz - 10,000 Hz
... Dytran presents model 3062A integrated electronic piezoelectric (IEPE) accelerometer. It has been specifically developed to cover vibration measurement points with widest frequency bands of Rotor, Track and Balance (RTB), airframe, helicopter, ...
DYTRAN INSTRUMENTS
Acceleration range: -100 m/s² - 100 m/s²
Frequency: 100 Hz - 100 Hz
Gyro100-4000 gyroscope is a silicon based MEMS gyroscope independently developed by BEWIS, which has completely independent intellectual property rights.Small size ceramic package, with high precision, wide range, large impact resistance, wide temperat
Wuxi Bewis Sensing Tecnology LLC
Frequency: 350 Hz - 800 Hz
... ER-QA-03F series quartz flexible accelerometer is a compact, high temperature and vibration resistant accelerometer. The product has excellent repeatability, start-up performance, high temperature and vibration resistance ...
SHAANXI ERICCO INERTIAL TECH. CO., LTD
the best suppliers