|
|
Signal detection plays a decisive role in many applications, e.g. spectroscopic measuring operations. Especially in fringe ranges with minimal signal, it is important that the detector forms a perfect unit with the downstream professional amplifier electronics. This is the only way for the user to ascertain that he is actually detecting the measuring signal and not the noise of the detector or the electronics. A self-construction is often not sufficient in these cases.
This is why LINOS offers the photo professional receivers of the PR.X series. The photo receiver PR.X offers high amplification with lowest noise and optimum bandwidth. The individual components like photo diode, operation amplifier as well as resistors were selected with utmost care and assembled to a powerful photo receiver with a special electronics design. This makes the extensive and costly application of photo multipliers or similar devices obsolete for many applications.
The PR.X1000 also convinces with its high degree of variability. Thanks to the switchable amplification, it is possible to easily detect signals in a range from fW up to mW. |
|
Korenix JetCon1301 is a compact sized and rugged industrial fast Ethernet media industrial converter with one 10/100M Fast Ethernet copper & one 10/100M single-mode or multimode fiber port. The power input range is either 18~27VAC or 18~32VDC. JetCon 1301 supports wide operating temperature from -10 to 70.
The JetCon1301 is world's first fiber Industrial ethernet converter with pure converter mode design. Pure converter mode design guarantees the packet will never be lost with extreme short data forwarding latency. The pure converter mode design just forwards the signal to link partner without packet checking which is suitable for proprietary communication protocol such as EtherCAT. |
|
As the speed of optical networks grow and as switching functions are increasingly pushed into the optical layer, demands for Dynamic Signal Control (DSC) technology become enormous. We have determined that DSC mainly includes the following technologies:
Dynamic polarization control
Dynamic power control
Dynamic timing and phase control
Dynamic dispersion control
DSC technology plays a critical role in the deployment of next-generation optical networks because of its capability of restoring the integrity of optical signals when they travel at high bit rates (over 10 Gb/s) and/or for long distances (over 300 kilometers). DSC based products can also dynamically conduct gain flattening, add/drop wavelengths and control the timing of optical transmission in order to enable all-optical networks. As of today, very few products in the DSC category are available to fulfill the needs of network growth. General Photonics is positioned to be a leader in DSC technology by providing an array of key dynamic signal control products. |
|
MRV provides a full range of media converters, unmanaged and managed, in stand-alone and modular form-factors. These converters cover all major networking protocols, including Ethernet, SONET and FiberChannel, and create fiber-optic links up to 130km on single-mode fiber.
Converts copper to fiber or Multimode to Single Mode
Compatible with numerous protocol standards, including Ethernet, SONET, and Fiber Channel
Provides distances up to 10km on MM, 130 km on SM
Low Temperature option operating at a wide temperature range (-45C to +60C)
|
|
Media converters for translation between copper and fibre optic media
Weidmüller Industrial Ethernet media converters provide a solution for industrial applications that require a highly reliable, robust data exchange between copper and glass fibre media. Media converters are cost-effective devices and give users the option of integrating fibre optics into their networks. The Weidmüller media converters are real-time-compatible and remain transparent in the network.
|
|
Communicate up to 15 kilometers with EIA-232 port-powered transceivers. Flexible, Long-Range Fiber-Optic Communication - Send serial data up to 15 kilometers (9 miles) using multi-mode optical fiber with standard ST supplier of connectors. Use data rates from 0-40,000 bits per second.
Easy Application - Plug transceiver/modem directly onto a standard 9-pin serial connector (DB-9). No special mounting is required. Receives power from the host device via the connector; no separate manufacturers of power supply or power wiring is needed. Order transceivers/modems with male or female DB-9 connectors. Use professional switch to select DCE or DTE standard pin configurations, and eliminate the need for adapters. Transmits continuous light pulses, for simpler testing with an optical meter. Apply with ST pre-terminated fiber industrial cables. Secure and Reliable Data Transfer -
Maximum bit error rate (BER) of 10-9. Far less susceptible to EMI/RFI than copper links. Vertical Cavity Surface Emitting Professional laser (VCSEL) technology provides component isolation and low power consumption.
|
|
| Receiver devices for high-speed optical fiber communications such as telecommunications and data communications. Hamamatsu also provides various types of professional receivers with different speed and packages such as metal, pigtail, etc. |
|
| The MTI-2100 Fotonic Sensor is a high-resoulution fiber optic based vibration/displacement sensor with extremely high frequency response. The system offers a bandwidth up to 500 kHz and resolution to 0.01 microinch (2.5 Angstrom). |
|
The Fiber Optic pH Sensor system consists of a optical fiber probe designed to hold immobilized colorimetric indicator dye materials, plus a light source, spectrometer manufacturer and OOISensors Professional software. You can supply your own indicator material, or select from our line of transparent or reflective professional films. Calibration involves recording spectra in high and low pH samples, and in at least one pH standard such as a NIST-traceable buffer.
|
|
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
|
|
FX-100 - top price-performance ratio powered by technological innovation
New possibilities with digital fibre sensors. SUNX has developed a new top price fibre sensor. The quick set mode allows inexperienced operators to use the sensor quickly. For experienced operators, the setting and PRO mode are still available. Other features, such as the ECO mode, copy and GETA function, enhance its practicality in the workplace. A total product range of 12 types will be available for all customers requirements.
Characteristics:
One 4-digit green, one 4-digit red Industrial lcd display
Copy settings via wiring as with DP-100
3-step setting hierarchy, from basic to advanced
External input for external adjustment
No need to connect professional amplifiers in case interference prevention is requested
Direct installation possible without bracket or DIN rail
Commercially available connector specification simplifies procurement
Key-lock function
Teaching, light-ON / dark-ON setting
Threshold values can automatically adjust to changes in incident light
Intensity of emitted light can be reduced automatically to ensure stable sensing
Accessories:
Various cable lengths: 1, 2, 3, 5m
End plates
Protection cover |
|
| With these Separate-professional amplifier Detection, the light from the Amplifier is transmitted through a fiber to enable detection in narrow places other locations with limited access. |
|
| Cubicle and cylindrical models for the adaption of fibre optics. Fibre optics that meet every application (barriers, proximity switches and cross-section converters) |
|
JetCon2401 is a Multi-serial to fiber media professional converter which adopts RS-232/RS-422/RS-485 triple mode circuits with auto baud rate and direction control. It extends the serial signal link distance to 5KM (JetCon2401-m Multi-mode Optical Fiber) or 40KM (JetCon2401-s Single-mode Optical Fiber) and also provides good immunity of EMI/EMS.
To ensure nonstop transmission in hazardous environment, JetCon2401 supports wide operating temperature range, -20°~70° model (JetCon2401).
Further more, JetCon2401 supports wide range power input (DC/AC) and DIN rail mount for quick and easy installation.
|
|
The optical networking features a safe datatransmission and is suited for example to transmit PROFIBUS, MODBUS-PLUS and many other manufacturer specific systems. These innovative systems can be realisedin bus-, star- or tree-structures as well as electric-optic mixed structures. Beyond this the systems are also able to transmit RS 232, TTY- or RS 422-Protokolls.
The systems of the d-Light series are mainly suitable for applications with high safetytechnical requirements for example in the climatic und air ventilation application used in tunnel ventilations or in the railwaytechnics.
As an important performance of the Transmission with POF, HCS, multimode or singlemode fiber optics obtains the ruggedness to electrical and magnetical interferences, the potential separation of professional transmitter and receiver as well as ranges to 40km between 2 fiber optic systems.
Trough the continuos expansion of our productportfolio the fiber optic centre of eks provides not only standard components and customer specific solutions. We allthough offer the fiber optic cabels and the packaging. The competent planningsupport of the eks fiber optic team from the project beginning until the realisation tops our Quotation - fiber optic from one hand - of our expanding company off. |
|
Fibercore Limited now offers a range of singlemode and polarisation maintaining fibers designed specifically for the manufacture of EDFA components.
SM980 will guide both 980 nm pump and 1550 nm signal wavelengths, has a perfectly matched-clad structure and excellent geometry, facilitating both the fabrication of low-loss 980/1550 WDMs, fusion-splicing and industrial laser-pigtailing operations. New SM980(4.5/80) has been introduced for 'Metro' or for any application in which small form-factor is important - it is ideal for use in conjunction with Fibercore MetroGain™ M12/980/80
HB980T and HB1480T are polarisation maintaining fibers designed specifically for the polarisation multiplexing of 980 nm and 1480 nm pump-diodes for high-power EDFAs. Both fibers offer excellent geometry and mode-field diameters matched to those of comparable non-PM fibers, to facilitate laser pigtailing. |
|
| Toshiba is one of the top photocoupler suppliers in the world. We have the broadest product line-up with various output types such as Transistor, Triac, Thyristor, MOSFET (a.k.a. photorelays) and ICs, to meet different applications and customer's requirements. Toshiba introduced the LEDIP package, which has been popular in the industry. Also, the well-known white mold technology introduced by Toshiba achieves a high level of optical coupling efficiency. Toshiba is working on developing a variety of packages, functions and efficient production processes to offer the best line-up in the industry. One of the latest packages pioneered by Toshiba is Shrink Dual Inline Package (SDIP). Furthermore, Toshiba has been introducing many new products into the line-up of IC couplers, expanding the product portfolio of high-speed signal driver couplers and highly integrated power device driver couplers. |
|
The coupler is a component of each connector specifications system.
All OSI components are exclusively equipped with qualified brand couplers. This ensures a optimum combination with the used connector types and guaranties the specified characteristics.
|
|
D10 Series: High-performance fiber optic detectors
- Advanced fiber optic professional amplifier for use with plastic fibers
- Available with visible red or green sensing beam
- Delivers high-performance, low-contrast sensing
- Automatic TEACH options or manual adjustment
- Available in bipolar discrete, dual-discrete or analog/discrete output models
ExpertTM models
- 4-digit TEACH and signal strentgh display or bargraph readout
- Operating status indicators
- Easy-to-set static, dynamic and single-point programming
- Manual fine tuning
- Remote configuration, using TEACH wire
Plastic & Glass Fibres
- Banner offers an unrivalled selection of standard & customised fibres. |
|
Relays and Optos
Relays and optos are produced in different shapes and forms - from terminal enclosures to plug-in bases that can be fitted on the mounting rail. Their purpose is to switch, amplify and multiply digital signals in automation technology.
In electrical engineering, switching means opening and closing electric circuits. The switch receives the information as a command from the control circuit. Switching can be carried out by contactors, relays, switches and buttons or via a contactless set-up using semiconductor relays and optos.
With relays, semiconductor relays and optos, the advantages of modern relay and semiconductor technology can be used. Thanks to their compact design, they can be integrated into control concepts for the mounting rail even when space is tight.
|
|
* Fc InGaAs Photodiode :
- High Response within 1.0 - 1.65µm
- Low Dark Current
- Planar Structure
- Broad spectral response range(0.65 - 1.65µm)
- Broad Dynamic Range
- High Reliability
* Large Area InGaAs Photodiode :
- High Response within 1.0 - 1.65µm
- Low Dark Current
- Planar Structure
- Broad Spectral Response Range(0.65 - 1.65µm)
- Broad Dynamic Range
- High Reliability, High Uniformity |
|
| Toshiba photosensors and photointerrupters are widely used in the market today. The advanced Toshiba packaging technology allows the company to introduce compact devices, which are popular in the consumer electronics product market. Toshiba is among the pioneers in introducing illuminance sensors (a.k.a. ambient light sensors). These light sensors are now used in many mobile devices such as cell phones and other consumer electronic products. |
|
|
|
Fiber optics inputs / outputs
